Kraus KPF2631CH, KPF2631 User Manual
INSTALLATION MANUAL
Oletto™ Single Handle
Commercial Style Kitchen Faucet
KPF-2631
www.kraususa.com I Toll Free: 1.800.775.0703 I © 2017 Kraus USA Inc. I REV. November 20, 2017
Congratulations on the purchase of your new
Kraus plumbing xture!
Please keep the box and packaging materials until your product is
completely installed. If you have any questions, require technical
assistance, or have any problems with your product:
DO NOT RETURN TO STORE
Please contact our Customer Service Team
1-800-775-0703 / customerservice@kraususa.com
Have the model number available, and retain a copy of your receipt
with purchase date for reference.
If for any reason this product does not meet your expectations,
please be sure to repack this product in the original box and
packaging material to avoid damage during transit.
1
Prior to Installation:
2
1A
D
7/8”
19.7
º
(22mm)
8 5/16”
1 1/4-18UNF-2A
(21mm)
10 1/8”
(257mm)
1 3/8”
(35mm)
Phillips screwdriver
Make sure you have all necessary parts by checking the diagram and parts list. If
•
any part is missing or damaged, please contact Kraus Customer Service at 800-
775-0703 for a replacement
• Turn off the hot and cold water supply at the angle stops and turn on the old
faucet to release any built up pressure. Remove existing faucet. Clean sink or
countertop to remove any debris, plumber’s putty, or silicone
• Place bucket under angle stops. Turn on to ush any debris prior to installing new
plumbing. Shut off angle stops
• Pre-drilled hole size requirement: 1-3/8” (min) – 1-1/2” (max)
• Max countertop thickness without deck plate: 1-1/2”
• Max countertop thickness with deck plate: 1”
• 1, 2, or 3 hole installation
Without deck plate:
1/16” (1mm) min.
1-1/2” (38 mm) max.
Ø 1-3/8” (35 mm) min.
Ø 1-1/2” (38 mm) max.
With deck plate:
1/16” (1mm) min.
1” (25.4 mm) max.
Ø 1-3/8” (35 mm) min.
Ø 1-1/2” (38 mm) max.
Tools you will need:
Adjustable Wrench
Safety Goggles Bucket Silicone Sealant
2
Diagram and Parts List
A
I
B
C
J
D
E
F
G
H
A. Spray Head
B. Faucet Body
C. Deck & Putty Plate
D. Supply Hose
E. Hot & Cold Waterlines
F. Spray Hose
3
G. Weight
H. Quick Connect
I. Hex Wrench
i1. 2.5mm
i2. 4mm
J. Base
Faucet Dimensions
562mm
22 1/8”
10 1/4"
260.5mm
4 1/4"
106.5mm
9/16-24UNEF-2B
11"
279mm
9 1/4"
233mm
2
5
6
8 3/4"
181mm
7 1/8"
1"
25mm
223mm
2 1/2"
62mm
1 3/8"
35mm
5
Step 1A: Install base without deck & putty plate
Insert base (J) into sink or
J
Half Moon Locking Nuts
i2
countertop with “FR↑NT” facing
forward. Tighten screws on base
(J) with 4mm hex wrench (i2)
until base is secure on sink or
countertop
Installer Tip: Rotate the
two half-moon shaped
locking nuts inward before
inserting base (J) into sink or
countertop
4
Loading...