Kraus KHU32262041CH, KHU322262041CH, KPF2620SFS User Manual
INSTALLATION GUIDE
Oletto™ Single Lever Pull Down
Kitchen Faucet
KPF-2620
www.kraususa.com I Toll Free: 1.800.775.0703 I © 2017 Kraus USA Inc. I REV. August 8, 2017
Congratulations on the purchase of your new
Kraus plumbing xture!
Please keep teh box and packaging materials until your product is
completely installed. If you have any questions, require technical
assistance, or have any problems with your product:
DO NOT RETURN TO STORE
Please contact our Customer Service Team
1-800-775-0703 / customerservice@kraususa.com
Have the model number available, and retain a copy of your receipt
with purchase date for reference.
If for any reason this product does not meet your expectations,
please be sure to repack this product in the original box and
packaging material to avoid damage during transit.
1
2
1A
D
C
3/8”
(10mm)
7/8”
19.7
º
(22mm)
8 5/16”
1 1/4-18UNF-2A
(21mm)
10 1/8”
(257mm)
1 3/8”
(35mm)
3 3/4”
(96mm)
Phillips screwdriver
Prior to Installation:
Make sure you have all necessary parts by checking the diagram and parts list. If
•
any part is missing or damaged, please contact Kraus Customer Service at 800-
775-0703 for a replacement
• Turn off the hot and cold water supply at the angle stops and turn on the old
faucet to release any built up pressure. Remove existing faucet. Clean sink or
countertop to remove any debris, plumber’s putty, or silicone
• Place bucket under angle stops. Turn on to ush any debris prior to installing new
plumbing. Shut off angle stops
• Pre-drilled hole size requirement: 1-3/8” (min) – 1-1/2” (max)
• Max countertop thickness without deck plate: 1-1/2”
• Max countertop thickness with deck plate: 1”
• 1, 2, or 3 hole installation
Without deck plate:
1/16” (1mm) min.
1-1/2” (38 mm) max.
Ø 1-3/8” (35 mm) min.
Ø 1-1/2” (38 mm) max.
With deck plate:
1/16” (1mm) min.
1” (25.4 mm) max.
Ø 1-3/8” (35 mm) min.
Ø 1-1/2” (38 mm) max.
Tools you will need:
Adjustable Wrench
Safety Goggles Bucket Silicone Sealant
2
Diagram and Parts List
A
A. Spray Head
B. Faucet Body
B
C. Deck & Putty Plate
D. Supply Hose
E. Hot & Cold Waterlines
F. Spray Hose
G. Weight
H. Quick Connect
I. Hex Wrench
i1. 2.5mm
i2. 4mm
J. Base
C
J
I
3
E
D
F
G
H
Faucet Dimensions
10 1/4"
260mm
4 1/4"
109mm
186mm
7 1/4"
40mm
1 5/8"
15
10 1/2"
267mm
8 3/4"
221mm
º
400mm
15 3/4"24 1/2"
208mm
8 1/4"
2 1/2"
62mm
1mm~30mm
1/16"-1 1/8”
Check Value
620mm
9/16-24UNEF
3/8” Compression
4
Loading...