Kraus KPF2252CH, KPF2252SFS, KPF2252 User Manual

Download

Page 1

INSTALLATION MANUAL

Single Handle Kitchen Faucet

KPF-2252

Page 2

Congratulations on the purchase of your new Kraus plumbing xture!

Please keep the box and packaging materials until your product is completely installed. If you have any questions, require technical assistance, or have any problems with your product:

DO NOT RETURN TO STORE

Please contact our Customer Service Team 1-800-775-0703 / customerservice@kraususa.com

Have the model number available, and retain a copy of your receipt with purchase date for reference.

If for any reason this product does not meet your expectations, please be sure to repack this product in the original box and packaging material to avoid damage during transit.

Page 3

Prior to Installation:

• Make sure you have all necessary parts by checking the diagram and parts list. If any part is missing or damaged, please contact Kraus Customer Service at 800-775-0703 for a replacement

• Turn o the cold and hot water at the angle stops and turn on the old faucet to release any built up pressure

• Flush angle stops to release any debris prior to installation

• Pre-drilled hole size requirement: 1-3/8” (min) – 1-1/2” (max)

• Max countertop thickness: 1-3/8

• 1 hole installation and 2 or 3 with optional deck plate (not included)

For technical assistance or replacement parts, please contact Kraus

Customer Service and one of our representatives will be happy to help:

Toll-Free: 800-775-0703 or Customerservice@kraususa.com

Page 4

Diagram and Parts List

1. Spray Head

2. Faucet Body

3. Mounting Hardware A. Rubber & Metal Washer

B. Mounting Nut C. Mounting Screws

4. Quick Connector

5. Hot & Cold Waterlines

6. Spray hose

7. Weight

8. Hex Wrench

Tools you will need

Adjustable

Wrench

Silicone Sealant

(optional)

Phillips

Screwdriver

Safety

Goggles

Page 5

Faucet Dimension

2 1/4”

58mm

1 3/8” ~1 1/2”

35~38mm

233mm

9 1/4”

1 3/8”

Max35mm

159mm

6 1/4”

10 1/4”

262mm

8 1/8”

207mm

2 1/4”

58mm

570mm

22 1/2”

2 x 9/16-24 UNEF

Installer Tip:

Shut o main water supply before installing new faucet

Page 6

Step 1: Remove mounting hardware

Remove the mounting

screws (3C), mounting nut

(3B), and rubber & metal

washer (3A) from the

mounting pipe

3B 3C

Step 2A: Faucet installation - with deck plate

For three-hole installation:

Deck plate, base plate

(see below), and silicone

sealant (optional) are

required

Note: optional deck plate

DP02, not included

Page 7

Step 2B: Faucet installation - without deck plate

For single-hole installation:

Deck plate, base plate, and

silicone sealant are NOT

required

Step 3: Install faucet and mounting hardware

Insert faucet body (2) into

hole in countertop or deck

plate assembly . Install

mounting hardware (3A, B

& C) from underneath the

countertop

3B 3C

NOTE: The white dot on the base of the faucet should be facing forward.

Page 8

Step 4: Secure mounting hardware

Adjust direction of faucet

body (2) so that handle is on

right side of faucet. Tighten

mounting nut (3B) until snug.

Tighten mounting screws

(3C) to nut with Phillips

screwdriver until snug

Step 5: Attach spray hose and counterweight

Connect spray hose (6)

to quick connector (4)

attached to supply line.

Install weight (7) on lowest

vertical point on spray

hose (6)

Page 9

Step 6: Connect waterlines

Step 7: Flush spray hose

Connect waterlines (5) to

angle stops. Tighten both

ends of waterlines with a

wrench until snug. Turn on

hot and cold angle stops

and check for leaks

Remove spray head (1) from

spray hose (6). Hold tip of

spray hose (6). Turn faucet on

and let the water run for 30

seconds to ush any debris

Page 10

Step 8: Check for leaks

Check for leaks at the

connections. Retighten if

necessary

Page 11

Hot Water

Cold Water

Push

Replacement Parts

Replacement Parts List

Finish / Color Part #

1. Metal Handle CH,SFS,MB KP06002

1 2

2. Set Screw

3. Handle Button CH,SFS,MB KP06030

　 KP06055

4. Cartridge Cover CH,SFS,MB KP06020

5. Locking Nut

6. Cartridge

7. Spray Hose CH,SFS,MB KP06097

8. Hose guide

　 KP06018

　 KP06100

　 KP06045

9. Spray Head CH,SFS,MB KP06090

10. Check Valve

11. Quick Connector

12. Rubber & Metal Washer

13. Mounting Nut

14. Mounting Screws

15. Protective Sleeve

16. Hot & Cold Waterlines

17. Weight

18. Hex Wrench

　 KP06104

KP06108

KP06042

　 KP06067

KP06068

KP06057

KP06095

　 KP06015

　 KP06050

Care & Maintenance

*To keep the product clean & shining, follow the steps below:

1. Rinse with clean water & dry with a soft cloth

2. Do not clean with soaps, acid, polish, abrasives, or harsh cleaners

3. Do not use cloth with a coarse surface

4. Unscrew the aerator and clean when necessary

*This installation manual is subject to change without further notice.

Page 12

Trouble - Shooting

If you have followed the instructions carefully and your faucet still does not work

properly, take the following corrective steps:

PROBLEM CAUSE ACTION

Leakage under faucet handle

Water does not shut off completely

Leaking between spray head and the hose

Locking nut has come loose or cartridge needs to be reseated

Cartridge may need to be adjusted or replaced

Spray head may be loose or washer is not seated correctly in the hose connection

Remove button located at top of handle. Loosen set screw with hex wrench. Remove handle and unscrew cartridge cover by hand. Tighten locking nut with an adjustable wrench

Remove button located at top of handle. Loosen set screw with hex wrench. Remove handle and unscrew cartridge cover by hand. Unscrew locking nut with an adjustable wrench. Remove ceramic disc cartridge. Check for cracks, and if O-ring is seated correctly. Reseat cartridge

Tighten spray head by hand until snug. Make sure washer is seated correctly

Hose does not retract Weight may be

installed incorrectly

Low flow Aerator may be clogged Unscrew aerator with

Readjust weight on hose

aerator key. Hold tip of spray head and turn on water to flush debris

Page 13

Maintenance - Cartridge Replacement

Step 1: Remove button

located at the base of the

handle. Loosen the set

screw with a hex wrench.

Remove the handle and

unscrew cartridge cover by

handhand

Step 2: Unscrew the

locking nut with an

adjustable wrench. Remove

ceramic disc cartridge

Step 3: Place the new

cartridge in the handle

seat. Secure the cartridge

with the locking nut and

assemble the handle

Page 14

Codes / Standards Applicable:

GREEN

NSF/ANSI Standard 61 certied by IAPMO

NSF/ANSI Standard 372 certied by IAPMO

Water Eciency

LEAD FREE

Meets ASME A112.18.1M/A112.18.1

1.8GPM 6.6L/min maximum

FAUCET WARRANTY

Kraus products are manufactured and tested to the highest quality standards by Kraus USA Inc. (“Kraus”). Kraus extends this warranty to the original purchaser for personal household use of the “Faucet” in its original location. The warranty is non-transferable.

Kraus warrants the structure and finish of the product to be free from defects in material and workmanship under normal usage for the lifetime of the product. The warranty commences from the initial date of purchase by the owner or trade professional, from an authorized Kraus dealer, through the lifetime of the original owner or end-user.

Kraus warrants the mechanical component (sprayhead assembly) of the product to be free from defects in material and workmanship under normal usage for a period of one (1) year. The warranty commences from the initial date of purchase by the owner or trade professional, from an authorized Kraus dealer, through the one (1) year term of the original owner or end-user.

Kraus warrants the mechanical component (cartridge) of the product to be free from defects in material and workmanship under normal usage for a period of five (5) years. The warranty commences from the initial date of purchase by the owner or trade professional, from an authorized Kraus dealer, through the five (5) year term of the original owner or end-user.

Any product reported to the authorized dealer or to Kraus as being defective within the warranty period will be repaired or replaced with a product of equal value at the option of Kraus. This warranty extends to the original owner or end-user, and is not transferable to a subsequent owner.

RESTRICTIONS

This warranty does not cover antediluvian, discontinued, or display products, whether such items are purchased at discount outlets, unauthorized dealers, and/or sold on clearance. This warranty does not cover instances of negligence, misuse, abuse, improper installation, carelessness, accident, hard water or mineral deposits, exposure to corrosive materials, misapplication, damages caused by improper maintenance, alteration of the product, or failure to follow care or installation instructions enclosed with your product. Avoid using abrasive cleaners such as powders, bleach, ammonia, alcohol, or chlorine. Avoid using abrasive pads, steel wool, or wire brushes, as these will damage and wear down the finish. This warranty does not apply to Products that have not been installed or operated in accordance with instructions supplied by Kraus and all applicable rules, regulations, and legislation pertaining to such installations.

This warranty does not apply unless the Kraus product is installed by a fully insured and licensed trade professional. Kraus insists that such professionals have experience in the installation of bathroom and kitchen manufactured goods.

This warranty does not cover labor charges or costs of removal and reinstallation of said product. This warranty does not allow recovery of incidental or consequential damages, such as loss of use, delay, property damage, or other consequential damages, and Kraus accepts no liability for such damages.

This warranty does not cover Marine or Outdoor Installation.

Page 15

Except as otherwise provided above, Kraus makes no warranties, expressed or implied, including warranties of merchantability and fitness for a particular purpose, or compliance with any code. Shipping charges will be covered for the first (1) year of the warranted replacement part or product (HI, AK, and Puerto Rico shipping charges may apply). International shipping fees are not included.

COMMERCIAL WARRANTY

Kraus extends the above warranty for a period of one (1) year to purchasers of products for industrial, commercial, and business use.

All incidental or consequential damages are specifically excluded. No additional warranties, express or implied, are given, including but not limited to any implied warranty of merchantability or fitness for a particular purpose.

Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

If you are a homeowner please contact a Kraus Customer Service Representative at:

Kraus USA, Inc. 12 Harbor Park Drive Port Washington, NY 11050 Toll-free 800-775-0703 Customerservice@kraususa.com

If you are a plumbing contractor or trade professional please contact a Kraus Pro Representative at:

Kraus USA, Inc. 12 Harbor Park Drive Port Washington, NY 11050 516-801-8955 Proservice@kraususa.com

If you are an Authorized Partner please contact a Partner Support Representative at:

Kraus USA, Inc. 12 Harbor Park Drive Port Washington, NY 11050 516-801-8954 Partnersupport@kraususa.com

In requesting warranty service, please be ready to provide:

1. Proof of purchase.

2. A description of the problem.

Download the Kraus Care & Maintenance Guide at:

http://www.kraususa.com/maintenance

Page 16

IMPORTANT

Activate Your Warranty

Access Premium Customer Support

Get Product Information

http://www.kraususa.com/registration