Kraus KPF1690SFSKSD31SFS User Manual

Download

Page 1

Britt Single Handle

Commercial Kitchen Faucet

KPF-1690

INSTALLATION GUIDE

Page 2

Congratulations on the purchase of your new Kraus plumbing fixture!

Please keep the box and packaging materials until your product is completely installed. If you have any questions, require technical assistance or have any problems with your product:

Please contact our Customer Service Team

1-800-775-0703 / customerservice@kraususa.com

Have the model number available and retain a copy of your receipt

with purchase date for reference.

If for any reason this product does not meet your expectations, please be sure to repack this product in the original box and packaging material to avoid damage during transit.

DO NOT RETURN TO STORE

STOP

Page 3

Prior to Installation:

· Make sure you have all necessary parts by checking the diagram and

parts list. If any part is missing or damaged, please contact Kraus Customer Service at 800-775-0703 for a replacement.

· Turn off the hot and cold water supply at the angle stops and turn on the

old faucet to release any built up pressure. Remove existing faucet. Clean sink or countertop to remove any debris, plumber’s putty, or silicone.

· Place bucket under angle stops. Turn on angle stops to flush any

debris prior to installing new plumbing. Shut off angle stops.

· Max countertop thickness: 2 1/8”

· Pre-drilled hole size requirement: 1 3/8"

· 1 or 3 hole installation

For technical assistance or replacement parts, please contact Kraus

Customer Service and one of our representatives will be happy to help:

Toll-Free: 800-775-0703 or customerservice@kraususa.com

Tools you will need:

Adjustable Wrench Bucket

Phillips Screwdriver Safety Goggles

Page 4

Diagram and Parts List

A. Spray Head

B. Faucet Body

C. Mounting Hardware

C1. Rubber & Metal Washer

C2. Mounting Nut

C3. Mounting Screw

D. Flange & Washer

E. Escutcheon

F. Base Plate

G. Escutcheon Mounting Hardware

G1. Bolt

G2. Plastic Nut

H. 2.5 mm Hex Wrench

I. 2.2 GPM Washer

C2 C3

Page 5

Faucet Dimensions

3/8" Compression

20 3/4"

(525.5mm)

2 1/8"

(54.2mm)

4 5/8"

(116.6mm)

10 3/4"

(271.6mm)

6 1/2"

(163.8mm)

2 1/8"

(55.2mm)

8 1/2"

(215mm)

Page 6

Step 1. Remove mounting hardware

Step 2. Install the faucet assembly (without deckplate)

Shut off the water supply. Remove the old faucet. Clean the mounting surface. Remove mounting hardware (C) from faucet body (B).

Before installation, ensure that the flange (D) is placed on the bottom of the new faucet assembly (B). Insert the faucet body through the hole in the sink. NOTE: Skip this step and move on to Step 3 if installing with deckplate.

Page 7

Step 3. Install the escutcheon

Step 4. Install the faucet assembly (with deckplate)

Before installation, remove the flange (D). Screw the bolts (G1) into the escutcheon (E) and ensure that the base plate (F) is pressed onto the escutcheon (E) before the escutcheon (E) is installed over the three holes on the sink. From underneath the sink, hand tighten the mounting nuts (G2). Do not overtighten. NOTE: Skip this step if installing without deckplate.

Insert the faucet assembly (B) through the hole in the escutcheon (E). NOTE: Skip this step if installing without deckplate.

Page 8

Step 5. Secure the faucet assembly

Step 6. Connect the waterlines

Install the plastic washer and metal washer (C1) onto the threaded mounting shank. Thread the nut (C2) onto the mounting shank. Lock the nut (C2) into position by tightening the screws (C3). Do not overtighten.

Thread the nut (1) on the supply line onto the outlet of the water supply valve (2) and tighten with wrench. Do not overtighten.

C1 C2 C3

Page 9

Step 7. Flush and check for leaks

Pull hose assembly out of spout and remove spray head by unscrewing from hose in a counterclockwise direction. Hold the end of the hose down into the sink and turn the faucet on to the warm position. Flush water lines for one minute to flush away any debris. Check for leaks.

Re-tighten any connections if needed. Do not overtighten. Reinstall spray head by hand tightening it back onto the spray hose. After installation is completed, turn on the hot and cold water supplies to check for leaks.

Step 8. Flow regulator replacement

This faucet ships with a 1.8 GPM washer installed. Remove the

1.8 GPM washer and replace with the 2.2 GPM washer.

To switch the flow rate of the faucet:

1. Unthread the spray head and remove the 1.8 GPM washer (1).

2. Replace the washer with the 2.2 GPM washer (2) provided.

NOTE: In compliance with CEC standards, this faucet is designed with a 1.8 gpm

flow rate. At your discretion, you may modify the product with the included 2.2 gpm restrictor. Please note that doing so will remove the capability of this product to meet specifi c low- flow standards. Kraus is not liable for any alterations made to the product post-sale, and highly advises that you consult with your local or statewide plumbing enforcement agency prior to any modifi cation.

Page 10

Replacement Parts

1. Spray Head

2. 2.2 GPM Washer

3. 1.8 GPM Washer

4. Sprayer Hose

5. Inverter

6. Spring

7. Inverter

8. O-ring

9. Block

10. Washer

11. Spray Support Assembly

12. Set Screw

13. Cartridge

14. Bonnet Nut

15. Cap

16. Handle

17. Set Screw

18. Cover Button

19. Rubber &

Metal Washer

20. Nut & Screw

21. Flange

22. Escutcheon

23. Escutcheon

Mounting

Hardware

24. Filter Washer

Replacement Finish/Color Part # Parts List

KP27195

KP27197 KP27196 KP27025

KP27026 KP27027 KP27080 KP27029 KP27030

KP27031

KP27032

KP27033 KP27035 KP27036 KP27037 KP27038 KP27001

KP27002 KP27028

KP27041

KP27184

*Denotes faucet component color options:

SFS - Spot Free Stainless Steel MB - Matte Black BG - Brushed Gold SFACB - Spot Free Antique Champagne Bronze SFSB - Spot Free Black Stainless AB - Antique Brass BL - Black GR - Gray

KP27185

GR,BL*

SFS,BG,SFACB,SFSB,AB*

SFS,BG,SFACB,SFSB,MB,AB*

KP27079

BLAB,BLBG,BLSFSB

SFS,AB,BG,SFSBMB

SFACBMB,BGMB*

KP27167

GR,BL*

BLMB,BLSFACB,SFS*

For 2.2 GPM option

SFS,BG,SFACB,SFSB,AB*

Page 11

Troubleshooting

If you have followed the instructions carefully and your faucet still does not work properly, take the following corrective steps:

Leakage under faucet handle

The bonnet nut (14) has come loose and the ring on the cartridge is dirty or damaged

Tighten the bonnet nut. Clean or replace the cartridge

Leaking between spray head

and the hose

Spray head (1) may be loose or

washer (3) is not seated correctly

in the hose connection.

Tighten spray head (1) by hand until snug. Make sure washer (3) is seated correctly

PROBLEM CAUSE ACTION

The water pressure is low

Waterlines may be clogged

Turn off the water supply at water valve and unscrew the hose connectors from water supply lines. Clean the screen in the water lines with hot water, removing any debris or calcium build up.

Page 12

Care & Maintenance

To keep the product clean & shining, follow the steps below:

1. Rinse with clean water & dry with a soft cloth

2. Do not clean with soaps, acid, polish, abrasives or harsh cleaners

3. Do not use cloth with a coarse surface

4. Unscrew the aerator and clean when necessary

This installation manual is subject to change without further notice.

Download the Kraus Care & Maintenance Guide at:

http://www.kraususa.com/maintenance

ACID

Page 13

FAUCET WARRANTY

Kraus products are manufactured and tested to the highest quality standards by Kraus USA Inc. ("Kraus").

Kraus extends this warranty to the original purchaser for personal household use of the "Faucet" in its original location. The warranty is non-transferable.

Kraus warrants the structure and finish of the product to be free from defects in material and workmanship under normal usage for the lifetime of the product. The warranty commences from the initial date of purchase by the owner or trade professional, from an authorized Kraus dealer, through the lifetime of the original owner or end-user.

Kraus warrants the mechanical components such as but not limited to sprayhead assembly (includes engine, aerators, structure, restrictors, back flow preventers, sprayer hoses, braided supply line hoses which encompasses nylon, silicon and stainless steel,etc) of the product to be free from defects in material and workmanship under normal usage for a period of one (1) year. The warranty commences from the initial date of purchase by the owner or trade professional, from an authorized Kraus dealer, through the one (1) year term of the original owner or end-user.

Kraus warrants the mechanical component (cartridge) of the product to be free from defects in material and workmanship under normal usage for a period of five (5) years. The warranty commences from the initial date of purchase by the owner or trade professional, from an authorized Kraus dealer, through the five (5) year term of the original owner or end-user.

Any product reported to the authorized dealer or to Kraus as being defective within the warranty period will be repaired or replaced with a product of equal value at the option of Kraus. This warranty extends to the original owner or end-user, and is not transferable to a subsequent owner.

RESTRICTIONS

This warranty does not cover antediluvian, discontinued, or display products, whether such items are purchased at discount outlets, unauthorized dealers, and/or sold on clearance.

This warranty does not cover instances of negligence, misuse, abuse, improper installation, carelessness, accident, hard water or mineral deposits, exposure to corrosive materials, misapplication, damages caused by improper maintenance, alteration of the product, or failure to follow care or installation instructions enclosed with your product. Avoid using abrasive cleaners such as powders, bleach, ammonia, alcohol, or chlorine. Avoid using abrasive pads, steel wool, or wire brushes, as these will damage and wear down the finish.

This warranty does not apply to Products that have not been installed or operated in accordance with instructions supplied by Kraus and all applicable rules, regulations, and legislation pertaining to such installations.

This warranty does not apply unless the Kraus product is installed by a fully insured and licensed trade professional. Kraus insists that such professionals have experience in the installation of bathroom and kitchen manufactured goods.

This warranty does not cover labor charges or costs of removal and reinstallation of said product. This warranty does not allow recovery of incidental or consequential damages, such as loss of use, delay, property damage, or other consequential damages, and Kraus accepts no liability for such damages.

This warranty does not cover Marine or Outdoor Installation.

Codes/Standards Applicable:

NSF/ANSI 372 NSF/ANSI 61-9

ASME A112.18.1

1.8GPM 6.8L/min maximum

Page 14

Except as otherwise provided above, Kraus makes no warranties, expressed or implied, including warranties of merchantability and fitness for a particular purpose, or compliance with any code.

Shipping charges will be covered for the first (1) year of the warranted replacement part or product (HI, AK, and Puerto Rico shipping charges may apply). International shipping fees are not included.

COMMERCIAL WARRANTY

Kraus extends the above warranty for a period of one (1) year to purchasers of products for industrial, commercial, and business use.

All incidental or consequential damages are specifically excluded. No additional warranties, express or implied, are given, including but not limited to any implied warranty of merchantability or fitness for a particular purpose.

Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

KRAUS USA has the right to change, modify, and/or update the warranty policy at any time. For the latest, most up to date comprehensive warranty, go to www.kraususa.com/warranty

Page 15

If you are a homeowner please contact a Kraus Customer Service Representative at:

Kraus USA, Inc.

12 Harbor Park Drive

Port Washington, NY 11050 Toll-free 800-775-0703 Customerservice@kraususa.com

If you are a plumbing contractor or trade professional please contact a Kraus Pro Representative at:

Kraus USA, Inc.

12 Harbor Park Drive

Port Washington, NY 11050 516-801-8955 Proservice@kraususa.com

If you are an Authorized Partner please contact a Partner Support Representative at:

Kraus USA, Inc.

12 Harbor Park Drive

Port Washington, NY 11050 516-801-8954 Partnersupport@kraususa.com

In requesting warranty service, please be ready to provide:

1. Proof of purchase.

2. A description of the problem.

Page 16

Activate Your Warranty

Access Premium Customer Support

Get Product Information

http://www.kraususa.com/registration

www.kraususa.com

IMPORTANT