Kraus KPF1690SFS User Manual

Download

INSTALLATION MANUAL

Britt™ Single Handle Commercial

Kitchen Faucet

KPF-1690

Thank you for your purchase

We would like to take this opportunity to thank you for choosing Kraus. We hope that you are completely satised with your purchase, and enjoy it for years to come. If you have any questions, or require technical assistance, please contact us at 800.775.0703 and one of our representatives will be happy to help.

For more information about Kraus products, please visit:

www.kraususa.com

In order to activate your warranty and get faster access to customer support, please register your new Kraus product at:

www.kraususa.com/registration

Sincerely,

Kraus USA Customer Service

6 5/8”

5 4/5”

3/8”

(10mm)

7/8”

19.7

(22mm)

8 5/16”

1 1/4-18UNF-2A

(21mm)

10 1/8”

(257mm)

1 3/8”

(35mm)

3 3/4”

(168mm)

(147.3mm)

(96mm)

Prior to Installation:

• Make sure you have all necessary parts by checking the diagram and parts list. If any part is missing or damaged, please contact Kraus Customer Service at 800-775-0703 for a replacement

• Turn o the hot and cold water supply at the angle stops and turn on the old faucet to release any built up pressure. Remove existing faucet. Clean sink or countertop to remove any debris, plumber’s putty, or silicone

• Place bucket under angle stops. Turn on angle stops to ush any debris prior to installing new plumbing. Shut o angle stops

• Max countertop thickness: 2 5/8”

• 1 or 3 hole installation

For technical assistance or replacement parts, please contact Kraus

Customer Service and one of our representatives will be happy to help:

Toll-Free: 800-775-0703 or customerservice@kraususa.com

Tools you will need

Adjustable Wrench

Bucket

Phillips Screwdriver

Safety Goggles

Diagram and Parts List

A. Spray Head

B. Faucet Body

C. Mounting Hardware

C1. Plastic & Metal Washer

C2. Mounting Nut

C3. Mounting Screw

E. Escutcheon

F. Base Plate

G. Escutcheon Mounting Hardware

G1. Bolt

G2. Plastic Nut

H. 2.5 mm Hex Wrench

C2 C3

D. Flange & Washer

Faucet Dimensions

20 11/16in [525.5mm]

10 11/16in

[271.6mm]

MAX:2 5/8in

[67.0mm]

2 1/8in

[54.2mm]

1 5/16"-1 1/2"

33-38 mm Hole Size

9/16-24UNEF-2B

90°

6 7/16in

[163.8mm]

8 7/16in

[215.0mm]

Step 1: Remove mounting hardware

Shut o the water supply.

Remove the old faucet. Clean

the mounting surface. Remove

mounting hardware (C) from

faucet body (B)

Step 2: Install the faucet assembly (without deckplate)

Before installation, ensure that the

ange (D) is placed on the bottom

of the new faucet assembly (B).

Insert the faucet body through the

hole in the sink.

NOTE: Skip this step and move

on to Step 3 if installing with

deckplate

Step 3: Install the escutcheon

5 6 7

C2 C3

Before installation, remove the

ange (D). Screw the bolts (G1) into

the escutcheon (E) and

ensure that the base plate (F)

is pressed onto the escutcheon

(E) before the escutcheon (E) is

installed over the three holes in the

sink. From underneath sink, hand

tighten the mounting nuts (G2).

Do not overtighten.

NOTE: Skip this step if installing

without deckplate

Step 4: Install the faucet assembly (with deckplate)

Insert the faucet assembly (B)

through the hole in the

escutcheon (E).

NOTE: Skip this step if installing

without deckplate

Step 5: Secure the faucet assembly

C1 C2 C3

Step 6: Connect the waterlines

Install the plastic washer and metal

washer (C1) onto the threaded

mounting shank. Thread the nut

(C2) onto the mounting shank.

Lock the nut (C2) into position by

tightening the screws (C3).

Do not overtighten

Thread the nut (1) on the supply line

onto the outlet of the water supply

valve (2) and tighten with wrench.

Do not overtighten

Step 7: Flush and check for leaks

Pull hose assembly out of spout

and remove spray head by

unscrewing from hose in a

counterclockwise direction.

Hold the end of the hose down

into the sink and turn the faucet on

to the warm position. Flush water

lines for one minute to ush away

any debris. Check for leaks.

Re-tighten any connections if

needed. Do not overtighten.

Reinstall spray head by hand

tightening it back onto the spray

hose. After installation is completed,

turn on the hot and cold water

supplies to check for leaks

Care & Maintenance

Hot Water

Cold Water

Push

*To keep the product clean & shining, follow the steps below:

1. Rinse with clean water & dry with a soft cloth

2. Do not clean with soaps, acid, polish, abrasives, or harsh cleaners

3. Do not use cloth with a coarse surface

4. Unscrew the aerator and clean when necessary

*This installation manual is subject to change without further notice.

Download the Kraus Care & Maintenance Guide at:

http://www.kraususa.com/maintenance

Replacement Parts

03 02

1. Spray Head

2. Check Valve

3. Washer

4. S.S Hose

5. Inverter

6. Spring

7. Washer

8. O-ring

9. Block

10. Washer

11. Spray Support & Shank Assemble

12. Set Screw

13. Flow Regulator

14. Cartridge & Screw

15. Bonnet Nut

16. Cap

17. Handle

18. Set Screw

19. Handle Button

20. Plastic Washer & Metal Washer

21. Nut & Screw

22. Flange

23. Escutcheon

24. Base Plate

25. Bolt

26. Nut

Trouble - Shooting

If you have followed the instructions carefully and your faucet still does not work

properly, take the following corrective steps:

PROBLEM CAUSE ACTION

Leakage under the handle

Leaking between spray head and hose

The water pressure is low

The bonnet nut (15) has come loose and the ring on the cartridge is dirty or damaged

Spray head (1) may be loose or washer (3) may not be seated correctly in the hose connection

Flow regulator (13) may be clogged with debris

Tighten the bonnet nut. Clean or replace the cartridge

Tighten spray head (A) by hand until snug. Make sure washer (3) is seated correctly

Loosen set screw(18) with hex wrench. Remove handle and unscrew the cap (16) by hand. Unscrew the bonnet nut with an adjustable wrench. Remove the cartridge (14,15). Clean the flow regulator

Codes/Standards Applicable:

GREEN

NSF/ANSI 372

NSF/ANSI 61-9

Water Eciency

Meets A112.18.1 1.8gpm 6.8L/min maximum

FAUCET WARRANTY

Kraus products are manufactured and tested to the highest quality standards by Kraus USA Inc. (“Kraus”). Kraus extends this warranty to the original purchaser for personal household use of the “Faucet” in its original location. The warranty is non-transferable.

Kraus warrants the structure and finish of the product to be free from defects in material and workmanship under normal usage for the lifetime of the product. The warranty commences from the initial date of purchase by the owner or trade professional, from an authorized Kraus dealer, through the lifetime of the original owner or end-user.

Kraus warrants the mechanical component (sprayhead assembly) of the product to be free from defects in material and workmanship under normal usage for a period of one (1) year. The warranty commences from the initial date of purchase by the owner or trade professional, from an authorized Kraus dealer, through the one (1) year term of the original owner or end-user.

Kraus warrants the mechanical component (cartridge) of the product to be free from defects in material and workmanship under normal usage for a period of five (5) years. The warranty commences from the initial date of purchase by the owner or trade professional, from an authorized Kraus dealer, through the five (5) year term of the original owner or end-user.

Any product reported to the authorized dealer or to Kraus as being defective within the warranty period will be repaired or replaced with a product of equal value at the option of Kraus. This warranty extends to the original owner or end-user, and is not transferable to a subsequent owner.

RESTRICTIONS

This warranty does not cover antediluvian, discontinued, or display products, whether such items are purchased at discount outlets, unauthorized dealers, and/or sold on clearance. This warranty does not cover instances of negligence, misuse, abuse, improper installation, carelessness, accident, hard water or mineral deposits, exposure to corrosive materials, misapplication, damages caused by improper maintenance, alteration of the product, or failure to follow care or installation instructions enclosed with your product. Avoid using abrasive cleaners such as powders, bleach, ammonia, alcohol, or chlorine. Avoid using abrasive pads, steel wool, or wire brushes, as these will damage and wear down the finish. This warranty does not apply to Products that have not been installed or operated in accordance with instructions supplied by Kraus and all applicable rules, regulations, and legislation pertaining to such installations.

This warranty does not apply unless the Kraus product is installed by a fully insured and licensed trade professional. Kraus insists that such professionals have experience in the installation of bathroom and kitchen manufactured goods.

This warranty does not cover labor charges or costs of removal and reinstallation of said product. This warranty does not allow recovery of incidental or consequential damages, such as loss of use, delay, property damage, or other consequential damages, and Kraus accepts no liability for such damages.

This warranty does not cover Marine or Outdoor Installation.

Except as otherwise provided above, Kraus makes no warranties, expressed or implied, including warranties of merchantability and fitness for a particular purpose, or compliance with any code. Shipping charges will be covered for the first (1) year of the warranted replacement part or product (HI, AK, and Puerto Rico shipping charges may apply). International shipping fees are not included.

COMMERCIAL WARRANTY

Kraus extends the above warranty for a period of one (1) year to purchasers of products for industrial, commercial, and business use.

All incidental or consequential damages are specifically excluded. No additional warranties, express or implied, are given, including but not limited to any implied warranty of merchantability or fitness for a particular purpose.

Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

If you are a homeowner please contact a Kraus Customer Service Representative at:

Kraus USA, Inc. 12 Harbor Park Drive Port Washington, NY 11050 Toll-free 800-775-0703 Customerservice@kraususa.com

If you are a plumbing contractor or trade professional please contact a Kraus Pro Representative at:

Kraus USA, Inc. 12 Harbor Park Drive Port Washington, NY 11050 516-801-8955 Proservice@kraususa.com

If you are an Authorized Partner please contact a Partner Support Representative at:

Kraus USA, Inc. 12 Harbor Park Drive Port Washington, NY 11050 516-801-8954 Partnersupport@kraususa.com

In requesting warranty service, please be ready to provide:

1. Proof of purchase.

2. A description of the problem.

Receive Proof of Ownership

Access Customer Care & Installation Help

Get Exclusive Kraus Oers & Promotions

Scan to Register Online

or visit http://www.kraususa.com/registration

We’re always looking for ways to improve.

Please take a moment to share your experience.

Visit http://www.kraususa.com/review to let us know what you think

about your new Kraus product.

1.800.775.0703 / www.kraususa.com / customerservice@kraususa.com Like & Follow KrausUSA

Download the Kraus Care & Maintenance Guide at:

http://www.kraususa.com/maintenance

www.kraususa.com

Kraus KPF1690SFS User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual