Page 1
INSTALLATION MANUAL
Single Handle Kitchen Faucet
KPF-1675
www.kraususa.com I Toll Free: 1.800.775.0703 I © 2018 Kraus USA Inc. I REV. August 13, 2018
Page 2
Congratulations on the purchase of your new
Kraus plumbing xture!
Please keep the box and packaging materials until your product is
completely installed. If you have any questions, require technical
assistance, or have any problems with your product:
DO NOT RETURN TO STORE
Please contact our Customer Service Team
1-800-775-0703 / customerservice@kraususa.com
Have the model number available, and retain a copy of your receipt
with purchase date for reference.
If for any reason this product does not meet your expectations,
please be sure to repack this product in the original box and
packaging material to avoid damage during transit.
1
Page 3
Prior to Installation:
• Make sure you have all necessary parts by checking the diagram and parts
list. If any part is missing or damaged, please contact Kraus Customer
Service at 800-775-0703 for a replacement
• Turn o the cold and hot water at the angle stops and turn on the old
faucet to release any built up pressure
• Flush angle stops to release any debris prior to installation
• Pre-drilled hole size requirement: 1-3/8” (min) – 1-1/2” (max)
• Max countertop thickness: 1-3/8
• 1 hole installation and 2 or 3 with optional deck plate (not included)
For technical assistance or replacement parts, please contact Kraus
Customer Service and one of our representatives will be happy to help:
Toll-Free: 800-775-0703 or Customerservice@kraususa.com
2
Page 4
Diagram and Parts List
13
9
1
8
1. Spray Head
2. Faucet Body
3. Hot and Cold
Copper Lines
A. Hot
B. Cold
2
4. Quick Connector
5. Mounting
7
Hardware
A. Rubber &
Metal Washer
6
3A
3B
B. Mounting Nut
C. Mounting
Screws
6. Hot & Cold
4
5A
5B
5C
Waterlines
7. Spray hose
8. Weight
9. Hex Wrench
Tools you will need
Adjustable
3
Wrench
Silicone Sealant
(optional)
Phillips
Screwdriver
Safety
Goggles
Page 5
Faucet Dimension
2”
52mm
4 5/8”
117mm
2 x 1/2-14NPSM
212mm
8 3/8”
419mm
16 1/2”
268mm
10 1/2”
11 1/4”
287mm
9 3/8”
238mm
2”
52mm
1 3/8” ~1 1/2”
35~38mm
1 3/8”
Max35mm
Installer Tip:
Shut o main water supply before installing new faucet
4
Page 6
Step 1: Remove mounting hardware
Remove the mounting
screws (5C), mounting nut
(5B), and rubber & metal
washer (5A) from the
mounting pipe
5A
5B
5C
Step 2A: Faucet installation - with deck plate
For three-hole installation:
Deck plate, base plate
(see below), and silicone
sealant (optional) are
required
Note: optional deck plate
DP01, not included
5
Page 7
Step 2B: Faucet installation - without deck plate
5A
5B
5C
For single-hole installation:
Deck plate, base plate, and
silicone sealant are NOT
required
Step 3: Install faucet and mounting hardware
Insert faucet body (2) into
hole in countertop or deck
plate assembly . Install
mounting hardware (5A, B
& C) from underneath the
countertop
6
Page 8
Step 4: Secure mounting hardware
Adjust direction of faucet
body (2) so that handle is on
right side of faucet. Tighten
mounting nut (5B) until snug.
Tighten mounting screws
5B
5C
(5C) to nut with Phillips
screwdriver until snug
Step 5: Attach spray hose and counterweight
Connect spray hose (7)
to quick connector (4)
attached to supply line.
Install weight (8) on lowest
vertical point on spray
hose (7)
4
7
7
8
Page 9
Step 6: Connect waterlines
3
6
Step 7: Flush spray hose
Connect waterlines (6) to
hot and cold copper lines
(3). Connect waterlines
(6) to angle stops. Tighten
both ends of waterlines
with a wrench until snug.
Turn on hot and cold angle
stops and check for leaks
Remove spray head (1) from
spray hose (7). Hold tip of
spray hose (7). Turn faucet on
7
and let the water run for 60
seconds to ush any debris
1
8
Page 10
Step 8: Check for leaks
Check for leaks at the
connections. Retighten if
necessary
9
Page 11
Hot
Water
Cold
Water
Push
Replacement Parts
19
Replacement
Parts List
1. Spray Head CH,SFS,MB KP06093
2. Hose guide GR,BL
2
17
1
3
4
5
10
11
12
13
14
15
16
17
18
22
7
8
9
3. Spout clip GR,BL KP06017
4. Handle Button CH,SFS,MB KP06030
5. Set Screw
6. Metal Handle CH,SFS,MB KP06001
21
7. Cartridge Cover CH,SFS,MB KP06021
8. Locking Nut
9. Washer
10. Cartridge
6
11. Cartridge Housing
12. O-Ring
13. Rubber & Metal
Washer
14. Mounting Nut
15. Mounting Screws
20
16. Protective Sleeve
17. Check Valve
18. Quick Connector
19. Spray Hose CH,SFS,MB KP06099
20. Hot & Cold Waterlines
21. Weight
22. Hex Wrench
Finish /
Color Part #
KP06004
KP06055
KP06018
KP06069
KP06100
KP06006
KP06061
KP06067
KP06057
KP06104
KP06111
KP06015
KP06050
KP06042
KP06068
KP06094
Care & Maintenance
*To keep the product clean & shining, follow the steps below:
1. Rinse with clean water & dry with a soft cloth
2. Do not clean with soaps, acid, polish, abrasives, or harsh cleaners
3. Do not use cloth with a coarse surface
4. Unscrew the aerator and clean when necessary
*This installation manual is subject to change without further notice.
10
Page 12
Trouble - Shooting
If you have followed the instructions carefully and your faucet still does not work
properly, take the following corrective steps:
PROBLEM CAUSE ACTION
Leakage under faucet
handle
Water does not shut off
completely
Leaking between spray
head and the hose
Locking nut has come
loose or cartridge
needs to be reseated
Cartridge may need to
be adjusted or replaced
Spray head may be
loose or washer is not
seated correctly in the
hose connection
Remove button located
at top of handle.
Loosen set screw with
hex wrench. Remove
handle and unscrew
cartridge cover by
hand. Tighten locking
nut with an adjustable
wrench
Remove button located
at top of handle.
Loosen set screw with
hex wrench. Remove
handle and unscrew
cartridge cover by
hand. Unscrew locking
nut with an adjustable
wrench. Remove
ceramic disc cartridge.
Check for cracks, and
if O-ring is seated
correctly. Reseat
cartridge
Tighten spray head by
hand until snug. Make
sure washer is seated
correctly
Hose does not retract Weight may be
installed incorrectly
Low flow Aerator may be clogged Unscrew aerator with
Readjust weight on
hose
aerator key. Hold tip of
spray head and turn on
water to flush debris
11
Page 13
Maintenance - Cartridge Replacement
Step 1: Remove button
located at the top of the
handle. Loosen the set
screw with a hex wrench.
Remove the handle and
unscrew cartridge cover by
hand
Step 2: Unscrew the
locking nut with an
adjustable wrench. Remove
ceramic disc cartridge
Step 3: Place the new
cartridge in the handle
seat. Secure the cartridge
with the locking nut and
assemble the handle
12
Page 14
Codes / Standards Applicable:
GREEN
NSF/ANSI Standard 61 certied by IAPMO
NSF/ANSI Standard 372 certied by IAPMO
Water Eciency
LEAD FREE
I
A
P
M
O
R
&
T
TM
Meets ASME A112.18.1M/A112.18.1
1.8GPM 6.6L/min maximum
FAUCET WARRANTY
Kraus products are manufactured and tested to the highest quality standards by Kraus USA Inc.
(“Kraus”). Kraus extends this warranty to the original purchaser for personal household use of the
“Faucet” in its original location. The warranty is non-transferable.
Kraus warrants the structure and finish of the product to be free from defects in material and
workmanship under normal usage for the lifetime of the product. The warranty commences from
the initial date of purchase by the owner or trade professional, from an authorized Kraus dealer,
through the lifetime of the original owner or end-user.
Kraus warrants the mechanical component (sprayhead assembly) of the product to be free from
defects in material and workmanship under normal usage for a period of one (1) year. The warranty
commences from the initial date of purchase by the owner or trade professional, from an authorized
Kraus dealer, through the one (1) year term of the original owner or end-user.
Kraus warrants the mechanical component (cartridge) of the product to be free from defects
in material and workmanship under normal usage for a period of five (5) years. The warranty
commences from the initial date of purchase by the owner or trade professional, from an authorized
Kraus dealer, through the five (5) year term of the original owner or end-user.
Any product reported to the authorized dealer or to Kraus as being defective within the warranty
period will be repaired or replaced with a product of equal value at the option of Kraus. This warranty
extends to the original owner or end-user, and is not transferable to a subsequent owner.
RESTRICTIONS
This warranty does not cover antediluvian, discontinued, or display products, whether such items
are purchased at discount outlets, unauthorized dealers, and/or sold on clearance. This warranty
does not cover instances of negligence, misuse, abuse, improper installation, carelessness, accident,
hard water or mineral deposits, exposure to corrosive materials, misapplication, damages caused by
improper maintenance, alteration of the product, or failure to follow care or installation instructions
enclosed with your product. Avoid using abrasive cleaners such as powders, bleach, ammonia,
alcohol, or chlorine. Avoid using abrasive pads, steel wool, or wire brushes, as these will damage
and wear down the finish. This warranty does not apply to Products that have not been installed
or operated in accordance with instructions supplied by Kraus and all applicable rules, regulations,
and legislation pertaining to such installations.
This warranty does not apply unless the Kraus product is installed by a fully insured and licensed
trade professional. Kraus insists that such professionals have experience in the installation of
bathroom and kitchen manufactured goods.
This warranty does not cover labor charges or costs of removal and reinstallation of said product.
This warranty does not allow recovery of incidental or consequential damages, such as loss of use,
delay, property damage, or other consequential damages, and Kraus accepts no liability for
such damages.
This warranty does not cover Marine or Outdoor Installation.
13
Page 15
Except as otherwise provided above, Kraus makes no warranties, expressed or implied, including
warranties of merchantability and fitness for a particular purpose, or compliance with any code.
Shipping charges will be covered for the first (1) year of the warranted replacement part or product
(HI, AK, and Puerto Rico shipping charges may apply). International shipping fees are not included.
COMMERCIAL WARRANTY
Kraus extends the above warranty for a period of one (1) year to purchasers of products for
industrial, commercial, and business use.
All incidental or consequential damages are specifically excluded. No additional warranties, express
or implied, are given, including but not limited to any implied warranty of merchantability or fitness
for a particular purpose.
Some states do not allow the exclusion or limitation of incidental or consequential damages or
limitations on how long an implied warranty lasts, so the above limitations or exclusions may not
apply to you.
This warranty gives you specific legal rights, and you may also have other rights which vary from
state to state.
If you are a homeowner please contact a Kraus Customer Service Representative at:
Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
Toll-free 800-775-0703
Customerservice@kraususa.com
If you are a plumbing contractor or trade professional please contact a Kraus Pro Representative at:
Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
516-801-8955
Proservice@kraususa.com
If you are an Authorized Partner please contact a Partner Support Representative at:
Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
516-801-8954
Partnersupport@kraususa.com
In requesting warranty service, please be ready to provide:
1. Proof of purchase.
2. A description of the problem.
Download the Kraus Care & Maintenance Guide at:
http://www.kraususa.com/maintenance
14
Page 16
IMPORTANT
Register Your Kraus Product
Activate Your Warranty
Access Premium Customer Support
Get Product Information
REGISTER TODAY
http://www.kraususa.com/registration
Loading...