Kraus KGD-430B, KGD-410B, KGD-433B, KGD-412B, KGU-434B Installation Manual

Granite Kitchen Sinks

INSTALLATION MANUAL

www.kraususa.com I phone: [phone] I fax: [phone] I toll free: 1.800.755.0703

KGD-433B / KGD-430B / KGD-412B / KGD-410B

KGU-434B / KGU-431B / KGU-413B

TOOLS REQUIRED:

• Tape Measure

• Utility Knife (x-acto type)

• Masking Tape

• Caulk

• Rubber Mallet

• Phillips Head Screwdriver

If countertop cutting is required:

• Safety Glasses

• Drill

• 1 ¼” Hole Saw (for faucet holes)

• Saber Saw (for main sink hole)

IMPORTANT INSTALLATION NOTE:

READ ALL INSTRUCTIONS CAREFULLY FIRST

Kraus recommends hiring a licensed plumbing professional to complete all fixture
installations. If you purchased a Dual Mount Granite Sink, there are two “Master
Templates” packaged with the sink. Before proceeding, you MUST determine whether
the sink will be installed as a TOP MOUNT / DROP IN (installed from the top of the
counter) or UNDERMOUNT (installed below the counter)

Find the line on either the Master Top Mount template or the Master Under Mount
template that corresponds to the model number of your new sink. Using a utility

knife, cut carefully along the correct line to create your cutting template.

KGD-433B

Dual Mount Models

can be installed either as a TOP MOUNT or as an UNDERMOUNT

can be installed as an UNDERMOUNT

KGU-434B

Undermount Models

KGU-431B KGU-413B

KGD-430B

KGD-412B KGD-410B

Step 1

Step 2

STEPS FOR TOPMOUNT INSTALLATION