Kraus KGD442, KGD441BLACK, KGD441GREY, KGD441BROWN, KGD442BLACK User Manual
...
INSTALLATION GUIDE
Granite Kitchen Sinks
KGD-410 / KGD-412/ KGU-413 / KGD-430 / KGD-433 /
KGU-43 / KGU-413 / KGU-434 / KGD-441 / KGD-442
www.kraususa.com I Toll Free: 1.800.775.0703 I © 2017 Kraus USA Inc. I REV. December 26, 2017
Congratulations on the purchase of your new
Kraus plumbing xture!
Please keep teh box and packaging materials until your product is
completely installed. If you have any questions, require technical
assistance, or have any problems with your product:
DO NOT RETURN TO STORE
Please contact our Customer Service Team
1-800-775-0703 / customerservice@kraususa.com
Have the model number available, and retain a copy of your receipt
with purchase date for reference.
If for any reason this product does not meet your expectations,
please be sure to repack this product in the original box and
packaging material to avoid damage during transit.
1
Please note:
• KGUs can be installed undermount only (Option B)
• KGDs can be installed topmount & undermount (Option A)
Prior to Installation:
Make sure that you have all necessary parts by checking the parts list. If any part is
•
missing or damaged, please contact Kraus Customer Service at 800-775-0703 for a
replacement
• Inspect the sink prior to installation to make sure that it has not been damaged or
during shipping
• Use the cut-out template provided by Kraus
• Observe all plumbing and building codes according to your state requirements
For technical assistance or replacement parts, please contact Kraus
Customer Service and one of our representatives will be happy to help:
Toll-Free: 800-775-0703 or Customerservice@kraususa.com
The step-by-step guidelines in the installation instructions are a general reference for installing a
Kraus Sink. Should there be any discrepancies, Kraus cannot be held liable. It is recommended to
install all Kraus products by hiring a licensed professional.
2
Tools and Required Materials
Phillips screwdriver
Safety Goggles
Hammer
Drill
Hole Saw
Silicone Adhesive Jig Saw
Masking Tape
Tape Measure
NOTE: Specialized tools may be necessary to install Kraus Granite sinks with
countertop materials other than wood, marble, or granite
Parts List
• Cut-Out Template • Mounting Hardware • Drain
NOTE: Parts lists may also vary depending on model
Pencil
Screwdriver
3
Hardware (included)
Kit for Drop-In Installation Kit for Undermount Installation
Important
• Instructions may vary depending on countertop material. Read all instructions
carefully, and ensure that counters are compatible with sink installation before
proceeding.
• Follow the plumber’s code and builder’s code eective in your area.
• Shut o water valves prior to installation.
• Open sink packaging and verify that the sink is in perfect condition. Put sink back
into packaging to protect it until time of installation.
• To replace an existing sink, make sure that the cut-out hole in the counter is of an
adequate size to t the new sink.
4
838mm
33”
362mm
14-1/4”
362mm
14-1/4”
559mm
22”
415mm
16.-3/8”
22”
559mm
21-1/2”
544mm
25”
635mm
18”
456mm
22”
559mm
18”
435mm
33”
838mm
29-1/2”
748mm
22”
559mm
18”
435mm
33”
838mm
29-1/2”
748mm
10-3/4”
271mm
8-1/4”
208mm
559mm
21-1/2”
544mm
25”
635mm
18”
456mm
9-1/2”
242mm
774mm
30-1/2”
720mm
28-3/8”
434mm
17”
370mm
14-1/2”
32-1/2”
824mm
14-1/4”
362mm
14-1/4”
362mm
18-7/8"
481mm
16-3/8”
415mm
720mm
28-3/8”
780mm
30-3/4”
510mm
20-1/8”
370mm
14-1/2”
720mm
28-3/8”
780mm
30-3/4”
510mm
20-1/8”
370mm
14-1/2”
220mm
8-5/8”
610mm
24”
544mm
21-3/8”
460mm
18-1/8”
394mm
15-1/2”
610mm
24”
544mm
21-3/8”
460mm
18-1/8”
209mm
8-1/4”
394mm
15-1/2”
Dimensions
mm: 559 x 838 x 241
in: 22 x 33 x 9.50
407mm
316mm
mm: 559 x 838 x 241
in: 22 x 33 x 9.50
838mm
33”
407mm
16”
316mm
12-1/2”
559mm
22”
435mm
17-3/4”
824mm
32-1/2”
505mm
19-7/8”
435mm
17-3/4”
407mm
16”
316mm
12-1/2”
33”
838mm
22”
559mm
415mm
16.-3/8”
KGD-410
24” x 18 1/8” x 8 1/4”
Min Cabinet Size: 27”
Drain Model #: BST-2
30-1/2”
774mm
17”
14-1/2”
370mm
434mm
28-3/8”
720mm
8-7/8”
220mm
KGU-413
30 1/2” x 17” x 8 7/8”
Min Cabinet Size: 33”
Drain Model #: BST-2 & ST-2
32-1/2”
824mm
KGD-412
30 3/4”x 20 1/8”x 8 5/8”
Min Cabinet Size: 33”
Drain Model #: BST-2
32-1/2”
824mm
18-7/8"
481mm
16-3/8”
415mm
14-1/4”
362mm
9-1/2”
241mm
14-1/4”
362mm
KGU-434
32 1/2” x 18 7/8” x 9 1/2”
Min Cabinet Size: 36”
Drain Model #: BST-2
14-1/4”
362mm
9-1/2”
241mm
14-1/4”
362mm
KGD-433
33” x 22” x 9 1/2”
Min Cabinet Size: 36”
Drain Model #: BST-2 & ST-2
33”
838mm
22”
559mm
17-3/4”
435mm
16”
9-1/2”
241mm
12-1/2”
KGD-430
33” x 22” x 9 1/2”
Min Cabinet Size: 36”
Drain Model #: BST-2 & ST-2
19-7/8”
505mm
17-3/4”
435mm
16”
407mm
9-1/2”
241mm
KGU-431
32 1/2” x 19 7/8” x 9 1/2”
Min Cabinet Size: 36”
Drain Model #: BST-2 & ST-2
5
12-1/2”
316mm
KGD-441
25” x 22” x 9 1/2”
Min Cabinet Size: 27”
KGD-442
33” x 22” x 10 3/4”
Min Cabinet Size: 36”
Loading...