INSTALLATION MANUAL
Aplos Single Lever Basin Faucet
KEF-15301
www.kraususa.com I toll free: 1.800.775.0703 I © 2013-2014 Kraus USA Inc.
Thank you for purchasing Kraus
We would like to take this opportunity to thank you for your business with Kraus
USA. It is our sincere hope that you are completely satised with your experience.
We welcome any questions or comments you may have, and will be glad to assist
you in the future.
For more information about Kraus products, please visit our website at:
www.kraususa.com
Please register your new Kraus product at the following web address in order to
activate the warranty and receive the full benet of customer support:
www.kraususa.com/registration
Sincerely,
Kraus Customer Service Department
Prior to Installation:
• Make sure you have all necessary parts by checking the diagram and parts list. If
any part is missing or damaged, please contact Kraus Customer Service at 800775-0703 for a replacement
• Turn o the hot and cold water lines at the angle stops and turn on the old
faucet to release any built-up pressure
• Pre-drilled countertop hole size requirement: 1-3/8” (min)
• Max countertop thickness: 1-3/8”
Diagram and Parts List
1. (A) Index Button
(B) Set Screw
2. Metal Handle
3. Cartridge Cover
4. Locking Nut
5. Cartridge
6. Faucet Body
7. Rubber Washer
8. Mounting Hardware
(A) Rubber Washer
(B) Metal Washer
(C) Mounting Nut
(D) Mounting Screws
9. Aerator
10. Aerator Key
11. Hex Wrench
12. Hot & Cold Waterlines
13. Lift Pole Rod
14. Connector
15. Lift Pole Extension
16. Waste Stopper
17. Drain
18. Rubber Washer
19. Concave Washer
20. Plastic Washer
21. Mounting Nut
22. Drain Body
23. Drain O Pole
24. Elbow Connector
25. Top Hat Washer
26. Washer
27. Drain Retaining Nut
28. Drain Body Washer
Tools you will need:
Adjustable Wrench
Silicone Sealant
(optional)
Phillips Screwdriver
Safety Goggles
Pipe Tape