Kraus KEF15300PU10BN Installation manual
INSTALLATION MANUAL
Aplos Single Lever Vessel Faucet
KEF-15300
www.kraususa.com I toll free: 1.800.775.0703 I © 2013-2014 Kraus USA Inc.
Thank you for purchasing Kraus
We would like to take this opportunity to thank you for your business with Kraus
USA. It is our sincere hope that you are completely satised with your experience.
We welcome any questions or comments you may have, and will be glad to assist
you in the future.
For more information about Kraus products, please visit our website at:
www.kraususa.com
Please register your new Kraus product at the following web address in order to
activate the warranty and receive the full benet of customer support:
www.kraususa.com/registration
Sincerely,
Kraus Customer Service Department
Prior to Installation:
Make sure you have all necessary parts by checking the diagram and parts list. If any part
•
is missing or damaged, please contact Kraus Customer Service at 800-775-0703 for a
replacement
• Turn o the hot and cold water lines at the angle stops and turn on the old faucet to
release any built-up pressure
• Pre-drilled countertop hole size requirement: 1-3/8” (min)
• Max countertop thickness: 1-3/8”
13
9
10
12
7
8A
8B
8C
8D
11
1B 1A
2
3
4
5
6
Replacement Parts
1. (A) Index Button
(B) Set Screw
2. Metal Handle
3. Cartridge Cover
4. Locking Nut
5. Cartridge
6. Faucet Body
7. Rubber Washer
8. Mounting Hardware
(A) Rubber Washer
(B) Metal Washer
(C) Mounting Nut
(D) Mounting Screws
9. Aerator
10. Aerator Key
11. Hex Wrench
12. Hot & Cold Waterlines
Tools you will need:
Wrench Phillips Screwdriver
Pipe Tape
Silicone Sealant
(optional)
Safety Goggles
Loading...