Kramer Electronics VP-690 User Manual

KRAMER ELECTRONIC S LTD.

USER MANUAL

MODEL:

VP-6 90

Presentation Switcher/Scaler

P/N: 2900-000704 Rev 7

VP-690 – Contents

i

Contents

1 Introduction 1
2 Getting Started 2

2.1 Achieving the Best Performance 2

2.2 Safety Instructions 3

2.3 Recycling Kramer Products 3

3 Overview 4

3.1 Defining the VP-690 Presentation Switcher/Scaler 5

4 Installing in a Rack 8
5 Connecting the VP-690 9
6 Controlling the VP-690 11

6.1 Controlling via the Front Panel Buttons 11

6.2 Using the OSD Menu 11

6.3 Connecting to the VP-690 via RS-232 15

6.4 Controlling via the ETHERNET 15

6.5 Controlling via the Infrared Remote Control Transmitter 16

7 Technical Specifications 17

7.1 Input Resolutions 18

8 RS-232 Communication Protocol 19

Figures

Figure 1: VP-690 Presentation Switcher/Scaler Front Panel 6
Figure 2: VP-690 Presentation Switcher/Scaler Rear Panel 7
Figure 3: Connecting the VP-690 Presentation Switcher/Scaler 10
Figure 6: Infrared Remote Control Transmitter 16

VP-690 – Introduction

1

1 Introduction

Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been
providing a world of unique, creative, and affordable solutions to the vast range of
problems that confront video, audio, presentation, and broadcasting professionals
on a daily basis. In recent years, we have redesigned and upgraded most of our
line, making the best even better!

Our 1,000-plus different models now appear in 11 groups that are clearly defined by
function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers;
GROUP 3: Control Systems; GROUP 4: Format/Standards Converters; GROUP 5:
Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7:
Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9:
Room Connectivity; GROUP 10: Accessories and Rack Adapters and GROUP 11:
Sierra Video Products.

Congratulations on purchasing your Kramer VP-690 Presentation Switcher/Scaler.
This product, which incorporates HDMI™ technology, is ideal for:

 Projection systems in conference rooms, boardrooms, hotels and churches
 Home theater up-scaling

2

VP-690 - Getting Started

Go to http://www.kramerelectronics.com/support/product_downloads.asp
to check for up-to-date user manuals, application programs, and to check
if firmware upgrades are available (where appropriate).

This equipment is to be used only inside a building. It may only be
connected to other equipment that is installed inside a building.

i

!

2 Getting Started

We recommend that you:

 Unpack the equipment carefully and save the original box and packaging

materials for possible future shipment

 Review the contents of this user manual

2.1 Achieving the Best Performance

To achieve the best performance:

 Use only good quality connection cables (we recommend Kramer high-

performance, high-resolution cables) to avoid interference, deterioration in
signal quality due to poor matching, and elevated noise levels (often
associated with low quality cables)

 Do not secure the cables in tight bundles or roll the slack into tight coils

 Avoid interference from neighboring electrical appliances that may adversely

influence signal quality

 Position your Kramer VP-690 away from moisture, excessive sunlight and

dust

VP-690 – Getting Started

3

Caution:

There are no operator serviceable parts inside the unit

Warning:

Use only the power cord that is supplied with the unit

Warning:

Do not open the unit. High voltages can cause electrical
shock! Servicing by qualified personnel only

Warning:

Disconnect the power and unplug the unit from the wall
before installing

!

2.2 Safety Instructions

2.3 Recycling Kramer Products

The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC aims
to reduce the amount of WEEE sent for disposal to landfill or incineration by
requiring it to be collected and recycled. To comply with the WEEE Directive,
Kramer Electronics has made arrangements with the European Advanced
Recycling Network (EARN) and will cover any costs of treatment, recycling and
recovery of waste Kramer Electronics branded equipment on arrival at the EARN
facility. For details of Kramer’s recycling arrangements in your particular country go
to our recycling pages at http://www.kramerelectronics.com/support/recycling/.

4

VP-690 - Overview

3 Overview

The Kramer VP-690 is a high quality presentation switcher and scaler. It accepts
one of nine inputs: one SD/HD/3G HD-SDI signal, two HDMI signals, two computer
graphics signals on 15-pin HD connectors, two composite video signals on RCA
connectors and two component video (also known as Y, Pb, Pr, Y, Cb, Cr and YUV;
compatible with both SD and HD component ) signals on RCA connectors. It scales
the video, embeds the audio, and outputs the signal to the HDMI output as well as
to a computer graphics output and an RGBHV video output together with a digital
audio output and an analog stereo audio output.

The VP-690 is HDTV compatible and the resolution can be up- or down-scaled as

follows: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p, WXGA, WSXGA, WUXGA,
NATIVE, VGA, SVGA, XGA, SXGA UXGA, 1280x800, WXGA+, 1600x900,
2048x1080@50 and 2048x1080@60

The VP-690 Presentation Switcher/Scaler:

 Has a video bandwidth of up to 2.97Gbps
 Is SMPTE 259M, 292M and 424M compliant
 Is HDCP Compliant - The HDCP (High Definition Content Protection) license

agreement allows copy-protected data on the HDMI input to pass only to the
HDMI output

 Has analog audio inputs which include volume control, and digital (S/PDIF)

and analog stereo audio outputs

 Automatically detects and selects the audio source for the HDMI input. Default

selection is HDMI – if this is not present, then the machine uses the audio
from the analog input

 Comes with an On-Screen Display (OSD) for easy setup and adjustment,

accessible via the IR remote control and via the front-panel buttons

 Has a non-volatile memory that retains the last settings used
 Supports firmware upgrade via RS-232

VP-690 – Overview

5

Control your VP-690:

 Directly, via the front panel push buttons
 By RS-232 serial commands transmitted by a touch screen system, PC, or

other serial controller

 Remotely, from the infrared remote control transmitter
 Via the Ethernet

The VP-690 is housed in a 19” 1U rack mountable enclosure, with rack “ears”

included, and is fed from a 100-240V AC universal switching power supply.

3.1 Defining the VP-690 Presentation Switcher/Scaler

This section defines the VP-690.