Kramer Wall Plate Series, WAP-1 Series, WAP-1 US Version, WAP-1 European Version User Manual

Kramer Electronics, Ltd.

USER MANUAL

Wall Plate Series

WAP-1

Contents

Contents

1 Introduction 1
2 Getting Started 1
3 Overview 1
4 Your WAP-1 Audio Wall Plate 2

4.1 The WAP-1 European Version 2

4.1.1 Mounting the WAP-1 (European Version) 4

4.2 The WAP-1 US Version 5

4.2.1 Mounting the WAP-1 (US Version) 6

5 Technical Specifications 6

Figures

Figure 1: WAP-1 (European Version) 2
Figure 2: WAP-1 Internal Frame (European Version) 3
Figure 3: Mounting the WAP-1 (European Version) 4
Figure 4: WAP-1 (US Version) 5

Tables

Table 1: WAP-1 Features 3
Table 2: WAP-1 Internal Frame Features 3
Table 3: WAP-1 Features (US Version) 5
Table 4: Technical Specifications of the WAP-1 6

i

Introduction

1 Introduction

Welcome to Kramer Electronics (since 1981): a world of unique, creative and

ffordable solutions to the infinite range of problems that confront the video,

a
audio and presentation professional on a daily basis. In recent years, we have
redesigned and upgraded most of our line, making the best even better! Our
500-plus different models now appear in 8 Groups1, which are clearly defined
by function.

Congratulations on purchasing your Kramer WAP-1 wall plate2, which is
ideal for the following applications: board, conference and training rooms,
presentation systems, and long distance signal distribution and home theater.

The package includes the following items:

 WAP-1 with a frame connected to the front panel
 Four self-tapping screws for fastening the frame to the wall
 This user manual3

2 Getting Started

We recommend that you:

npack the equipment carefully and save the original box and packaging

 U

materials for possible future shipment

 Review the contents of this user manual
 Use Kramer high performance high resolution cables4

3 Overview

The Kramer WAP-1 is a wall plate with two unbalanced stereo audio inputs
(INPUT 1 and INPUT 2) on 3.5mm mini jack connectors on the front panel
(INPUT 1 can also be accessed via an unbalanced stereo audio 3-pole terminal
block connector on the rear panel). The stereo audio (SPKR OUT) output on a
4-pole terminal block connector is located on the rear panel. The WAP-1 has
audio level control which is used to adjust the signal level.

1 GROUP 1: Distribution Amplifiers; GROUP 2: Video and Audio Switchers, Matrix Switchers and Controllers; GROUP 3:
Video, Audio, VGA/XGA Processors; GROUP 4: Interfaces and Sync Processors; GROUP 5: Twisted Pair Interfaces;
GROUP 6: Accessories and Rack Adapters; GROUP 7: Scan Converters and Scalers; and GROUP 8: Cables and Connectors
2 Each wall plate is supplied with the required M3x4 screws
3 Download up-to-date Kramer user manuals from our Web site at http://www.kramerelectronics.com
4 The complete list of Kramer cables is on our Web site at http://www.kramerelectronics.com

1