KRAMER ELECTRONICS LTD.
USER MANUAL
MODEL:
VS-24xl
Video-Audio Standby Switcher
P/N: 2900-002068 Rev 5
VS-24xl – Contents
i
Contents
1 Introduction 1
2 Getting Started 2
2.1 Achieving the Best Performance 2
3 Overview 3
3.1 Defining the VS-24xl Video-Audio Standby Switcher 3
4 Connecting the VS-24xl 5
5 Operating the VS-24xl 7
5.1 Setting the Automatic Mode 7
5.2 Setting the Manual Mode 7
5.3 Connecting the Remote Connector 8
6 Technical Specifications 9
Figures
Figure 1: VS-24xl Video-Audio Standby Switcher 3
Figure 2: Connecting the VS-24xl Video-Audio Standby Switcher 6
Figure 3: Remote Terminal Block Connector 8
VS-24xl - Introduction
1
1 Introduction
Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been
providing a world of unique, creative, and affordable solutions to the vast range of
problems that confront the video, audio, presentation, and broadcasting
professional on a daily basis. In recent years, we have redesigned and upgraded
most of our line, making the best even better!
Our 1,000-plus different models now appear in 11 groups that are clearly defined
by function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers;
GROUP 3: Control Systems; GROUP 4: Format/Standards Converters; GROUP 5:
Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7:
Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9:
Room Connectivity; GROUP 10: Accessories and Rack Adapters and GROUP 11:
Sierra Products.
Congratulations on purchasing your Kramer VS-24xl Video-Audio Standby
Switcher, which is ideal for the following typical applications:
Presentation systems requiring automatic selection via active wall plate
inputs
Security applications for automatic switching of control cameras
Broadcast applications to eliminate dead air time
Retail stores and other point-of-sale systems requiring uninterrupted
demonstrations and advertising
2
VS-24xl - Getting Started
Go to www.kramerav.com to check for up-to-date user manuals,
application programs, and to check if firmware upgrades are
available (where appropriate).
Caution:
No operator serviceable parts inside the unit
Warning:
Use only the Kramer Electronics input power wall
adapter that is provided with the unit
Warning:
Disconnect the power and unplug the unit from the wall
before installing
i
!
2 Getting Started
We recommend that you:
Unpack the equipment carefully and save the original box and packaging
materials for possible future shipment
Review the contents of this user manual
Use Kramer high-performance, high-resolution cables
2.1 Achieving the Best Performance
To achieve the best performance:
Use only good quality connection cables to avoid interference, deterioration
in signal quality due to poor matching, and elevated noise levels (often
associated with low quality cables)
Do not secure the cables in tight bundles or roll the slack into tight coils
Avoid interference from neighboring electrical appliances that may adversely
influence signal quality
Position your Kramer VS-24xl away from moisture, excessive sunlight and
dust
VS-24xl - Overview
3
3 Overview
The VS-24xl is a 2x1 standby switcher for composite video and balanced stereo
audio signals. The VS-24xl is designed to automatically switch to the second input
whenever the primary video signal is interrupted. If the primary signal reappears,
the VS-24xl automatically switches back to input one.
In addition, the VS-24xl features:
Operation as a simple 2x1 video and audio switcher using two front panel
buttons or as a remote controlled video and audio 2x1 switcher
A front panel button that allows the user to select between automatic and
manual switching
Video LEVEL and cable EQ. control via trimmers accessible from the front
panel
Contact closure control
3.1 Defining the VS-24xl Video-Audio Standby Switcher
This section defines the VS-24xl.
Figure 1: VS-24xl Video-Audio Standby Switcher
4
VS-24xl - Overview
#
Feature
Function
1
POWER Switch
Illuminated switch for turning the unit ON or OFF
2
SELECTOR IN 1 Button
In manual mode, press to switch input 1 to the output
3
SELECTOR IN 2 Button
In manual mode, press to switch input 2 to the output
4
MODE IN=AUTO Button
Push in to select automatic switching, release to select
manual switching
5
EQ Trimmer
Adjust the cable compensation equalization level
Insert a screwdriver into the hole and carefully rotate it, to
trim the level
6
LEVEL Trimmer
Adjust the output video signal level
Insert a screwdriver into the hole and carefully rotate it, to
trim the level
7
VIDEO IN 1 (Master) BNC
Connector
Connect to the primary video source 1
8
VIDEO IN 2 BNC Connector
Connect to the standby video source 2
9
VIDEO OUT BNC Connector
Connect to the video acceptor
10
AUDIO IN 1 (Master)
Terminal Block Connector
Connect to the primary balanced audio input 1
11
AUDIO IN 2 Terminal Block
Connector
Connect to the standby balanced audio input 2
12
AUDIO OUT Terminal Block
Connector
Connect to the balanced audio output
13
REMOTE Terminal Block
Connector
Connect to contact closure switches
14
12V DC
+12V DC connector for powering the unit
VS-24xl - Connecting the VS-24xl
5
Always switch off the power to each device before connecting it to your
VS-24xl. After connecting your VS-24xl, connect its power and then
switch on the power to each device.
The power connection is not shown in Figure 2.
i
i
4 Connecting the VS-24xl
To connect the VS-24xl as illustrated in the example in Figure 2:
1. Connect the composite video sources to the VIDEO IN 1 (master) and IN 2
BNC connectors.
2. Connect the CV audio sources (for example, from a DVD or VCR player) to
AUDIO IN 1 (master) and AUDIO IN 2 terminal blocks.
3. Connect the VIDEO OUT BNC connector to the CV input of the display.
4. Connect the AUDIO OUT terminal block connector to the balanced audio
input of the speakers.
5. If needed, connect the REMOTE terminal block connector to a remote
contact closure switch.
6
VS-24xl - Connecting the VS-24xl
Figure 2: Connecting the VS-24xl Video-Audio Standby Switcher
VS-24xl - Operating the VS-24xl
7
5 Operating the VS-24xl
This section describes how to:
Set the automatic mode (Section 5.1)
Set the manual mode (Section 5.2)
Connect the remote connector (Section 5.3)
5.1 Setting the Automatic Mode
When the VS-24xl is set to the automatic mode, the signal from input 1 takes
priority over the signal from input 2. If the signal from input 1 is interrupted, the
signal from input 2 automatically routes to the output. In the automatic mode,
pushing the SELECTOR buttons IN 1 and IN 2 has no effect.
To set the Automatic Mode:
Push in the MODE IN=AUTO button
5.2 Setting the Manual Mode
In manual mode, you choose which input to route to the output.
To set the Manual Mode:
1. Release the MODE IN=AUTO button.
2. Press one of the SELECTOR buttons:
SELECTOR IN 1 (to route the signal from input 1 to the output); or
SELECTOR IN 2 (to route the signal from input 2 to the output)
8
VS-24xl - Operating the VS-24xl
Route input 1
to the output,
by attaching
PIN 1 to the
Ground:
Route input 2
to the output,
by attaching
PIN 2 to the
Ground:
5.3 Connecting the Remote Connector
In addition to its automatic switching function, the VS-24xl can operate as a
remote controlled video and audio 2x1 switcher, by connecting contact closure
switches to the appropriate REMOTE input terminal block connector pins thus
forcing the routing of one of the two inputs to the output by remote control.
To do so, connect the appropriate REMOTE input terminal block connector pins to
a contact closure switch and release the MODE IN=AUTO button. For example, as
Figure 3 illustrates, to route remote input 1 to the output, connect PIN 1 to the
Ground. Similarly, to route remote input 2 to the output, connect PIN 2 to the
Ground. Do not connect both the remote input 1 and the remote input 2 to the
Ground simultaneously.
Figure 3: Remote Terminal Block Connector
When both input 1 and input 2 are connected, the (valid) signal from remote input
1 routes to the output. However, you can force the routing of remote input 2 to the
output by attaching PIN 2 to the ground. If no input is present on remote input 2,
you can even force the routing of the output from remote input 2 (displaying a
blank screen) by attaching PIN 2 to the ground.
VS-24xl - Technical Specifications
9
INPUTS:
2 composite video 1Vpp/75 on BNC connectors
2 balanced stereo audio +4dBu on detachable terminal
block connectors
OUTPUTS:
1 composite video 1Vpp/75 on a BNC connector
1 balanced stereo audio +4dBu on a detachable terminal
block connector
MAX. OUTPUT LEVEL:
Video: 2.1Vpp @100% color bars
VIDEO BANDWIDTH (-3dB):
620MHz
AUDIO BANDWIDTH (-3dB):
>65MHz (suitable for S/PDIF)
DIFF. GAIN:
0.03%
DIFF. PHASE:
0.03 Deg.
K-FACTOR:
<0.05%
S/N RATIO:
Video: 74dB; Audio: 71dB weighted
CROSSTALK (all hostile):
Video: -56.3dB Audio: -65.8dB @1kHz
CONTROLS:
Video level: -0.8 to +6.4dB; EQ: 0 to +12.8dB
AUDIO THD + NOISE:
0.019%
AUDIO 2nd HARMONIC:
0.002%
POWER CONSUMPTION:
12V DC, 90mA
OPERATING TEMPERATURE:
0° to +55°C (32° to 131°F)
STORAGE TEMPERATURE:
-45° to +72°C (-49° to 162°F)
HUMIDITY:
10% to 90%, RHL non-condensing
DIMENSIONS:
22cm x 18cm x 4.5cm (8.7” x 7” x 1.7”) W , D, H
(half 19”, 1U)
WEIGHT:
1.2kg (2.65lbs) approx.
ACCESSORIES:
12V power supply
Specifications are subject to change without notice at www.kramerelectronics.com/
6 Technical Specifications
For the latest information on our products and a list of Kramer distributors, visit
our Web site where updates to this user manual may be found.
We welcome your questions, comments, and feedback.
Web site: www.kramerav.com
E-mail: info@kramerav.com
P/N:
2900-002068
Rev:
5
!
SAFETY WARNING
Disconnect the unit from the power
supply before opening and servicing
Loading...