Kramer TS-PEU Users Guide

Page 1
P/N:
2900- 300777QS
Rev:
2
Installation Instructions

MODEL:

TS-PEU Universal Socket Power Extension
for Modular TBUS
SAFETY WARNING
Disconnect the unit from the power supply before opening and servicing
See www.KramerAV.com
For the latest information on our products and a list of Kramer distributors, visit our Web site where updates to these installation instruct i ons may be found.
We welcome your questions, comments, and feedback.
www.KramerAV.com info@kramerel.com
for updated safety information
Page 2
#
Feature
Function
2
Power Extension Unit Housing
Includes five built-in universal power sockets.
3
Bracket
Fit bracket over dual power socket opening on the TBUS frame.
4
Bracket Screw Openings (2 )
Attach to frame surface using 2 M3x8 screws (supplied).
5
Bracket Handle Opening (4)
Used for resting the Power Extension Unit when hidden under 6
Power Extension Unit Opening
Pass-through for pulli ng an d slidi ng the Power Extension Unit.
7
Pulling Handles (2)
Hold when pulling / hiding the Power Extension Unit.
8
Surface Power Socket
Power socket located on the unit surface.

Universal Socket Power Extension for Modular TBUS

Congratulations on purchasing your Kramer TS-PEU universal socket power extension for modular TBUS (TBUS-1AXL, TBUS-1N and/or TBUS-1KWC).
The TS-PEU includes six universal power sockets: one on the surface of the unit and five hidden neatly under the table. To use TS-PEU, simply pull it out of the TBUS surface using the handles and lay it on the table. When not in use, carefully slide the TS-PEU into the TBUS.
The TS-PEU fits into TBUS inner frame modules that include dual power socket openings (for example, P/N 80-000399 or P/N 80-000499).
Figure 1: TS-PEU
1 Power Cable with Male C14 Connector Connect to any universal C14 cable and to the mains.
the table.
Page 3
Installing the TS-PEU
The Kramer TS-PEU fits into a dual power socket opening.
To install the TS-PEU:
1. Place the TS-PEU under the dual power socket opening of a frame.
2. Tighten the bracket using the two M3x8 screws (supplied with the package).
Figure 2: TS-PEU installing in the TBUS
When needed, use the two side-handles to pull out the power socket extension.
Page 4
Ports
6 power universal connectors
Universal: 100-240V AC, 50/60Hz, 5A, maximum 5A per power outlet
Fully compati ble with power plugs in the UK, India, Italy and Denmark, as well as
Central Europe and France.
Fuse Rating:
Operating Temperature:
0° to +40°C (32° to 104°F)
Storage Temperature:
-40° to +70°C (-40° to 158°F)
Storage humidity range:
5% to 95%, RHL, non-condensing
Dimensions:
Power cord length 170cm (67”)
Shipping Dimensions
13.2cm x 49cm x 6cm (5.2" x 19.3" x 2.4") W, D, H.
Weight:
1.18kg (2.6lbs) approx.
Shipping Weight
Included Accessories:
Specifications are subject to change without notice at www.kramerav.com
Technical Specifications
Power Source (AC power limits):
Humidity: 10% to 90%, RHL, non-condensing
with the 2-prong Europlug. Partially com pa tible (if the polarit y is rever se d) wit h plug s in Chin a, S wit ze rla nd, Israel and the USA. The universal socket does not supply grounding to plugs in
T 10A 250V
12.2cm x 36.4cm x 5.1cm (4.8" x 14.3" x 1") W, D, H.
1.38kg (3.04lbs) approx. 2 M3x8 screws
Loading...