Installation Instructions
MODEL:
TS-PEU Universal Socket Power Extension
for Modular TBUS
SAFETY WARNING
Disconnect the unit from the power supply before opening and servicing
See www.KramerAV.com
for updated safety information
For the latest information on our products and a list of Kramer distributors, visit our Web site where
updates to these install ation i nstructions may be found.
We welcome your questions, comments, and feedback.
www.KramerAV.com
info@kramerel.com
P/N:
2900- 300777QS
Rev:
2
Universal Socket Power Exte nsion for Modular TBUS
Congratulations on purchasing your Kramer TS-PEU universal socket power extension for
modular TBUS (TBUS-1AXL, TBUS-1N and/or TBUS-1KWC).
The TS-PEU includes six universal power sockets: one on the surface of the unit and five hidden
neatly under the table. To use TS-PEU, simply pull it out of the TBUS surface using the handles and
lay it on the table. When not in us e, carefully slide the TS-PEU into the TBUS.
The TS-PEU fits into TBUS inner frame modules that include dual power socket openings (for
example, P/N 80-000399 or P/N 80-000499).
Figure 1: TS-PEU
#
Feature
Function
1 Power Cable with Male C14 Connector Connect to any universal C14 cable and to the mains.
2
Power Extension Unit Housing
Includes five buil t-in universal power sockets.
3
Bracket
Fit bracket over dual power socket opening on the TBUS frame.
4
Bracket Screw Openi n gs (2 )
Attach to frame surface using 2 M3x8 screws (supplied).
5
Bracket Handle Opening (4)
Used for resting the Power Extension Unit when hidden under
the table.
6
Power Extension Unit Opening
Pass-through for pull i ng an d sliding the Power Extension Unit.
7
Pulling Handles (2)
Hold when pulling / hiding the Power Extension Unit.
8
Surface Power Socket
Power socket located on the unit surface.
Loading...