Kramer TP-590RXR Data Sheet

TP-590RXR

4K UHD HDMI, Audio, USB, Bidirectional

| HDMI | Ethernet - RJ-45 | HDBaseT

| 4K/60 UHD (4:2:0)

RS232 & IR over HDBaseT 2.0 Twisted Pair
Receiver

The TP590RXR is a 4K UHD extended range,
HDBaseT 2.0 receiver for HDMI, USB 2.0, audio,
bidirectional RS232 and IR signals. It supports
resolutions up to 4K@60 UHD (4:2:0). The
TP590RXR receives the HDBT twisted pair signal
from the TP590TXR that it decodes back into
HDMI, USB, audio, RS232, and IR signals

FEATURES

Resolution Support - Up to 4K@60 UHD (4:2:0)
Maximum Data Rate - 10.2Gbps (3.4Gbps per graphic channel)
HDTV Compatible
HDCP Compliant
HDBaseT Certified - V2.0 support
USB Support - USB 1.1 & USB 2.0 (up to 127Mbps)
Supports Isochronous USB Cameras
HDMI Support - Deep color, x.v.Color™, lip sync, HDMI uncompressed audio channels, Dolby

TrueHD, DTSHD, CEC, 2K, 4K, 3D

System Range - Up to 130m (430ft) at normal mode (2K), up to 100m at normal mode (4K); up to

180m (590ft) ultra mode (1080p @60Hz @24bpp) when using BCHDKat6a cables

Cables - For optimum range and performance, use Kramer's BCHDKat6a cable. Note that the

transmission range depends on the signal resolution, source and display used. The distance using
nonKramer CAT 6 cable may not reach these ranges

EDID Pass Through - Passes EDID signals from the source to the display
USB Pass-Through - For connecting a peripheral device, such as, a mouse or a keyboard
Bidirectional RS-232 Interface - Data flows in both directions via the RS232 interface, allowing status

requests and device control

Bidirectional Infrared Interface - For remote control of peripheral devices
Power over Ethernet (PoE) - The device can be powered from remote transmitter such as the

TP590TXR

Audio De-embedding
Indicators - LED status indicators for input, output, HDBT link and power

TECHNICAL SPECIFICATIONS

INPUTS:

OUTPUTS:

PORTS:

MAX. DATA RATE:

RS-232 BAUD RATE:

COMPLIANCE WITH
HDMI STANDARD:

USB STANDARD:

SUPPORTED WEB
BROWSERS:

ENCLOSURE TYPE:

COOLING:

PRODUCT
DIMENSION:

1 HDBT on a RJ45 connector
1 HDMI on an HDMI connector, 1 stereo analog audio on a 3.5mm mini jack
1 IR on a 3.5mm mini jack, 1 USB 2.0 on a USB connector, 1 RS232 on a 3pin

terminal block for the serial link, 1 RS232 on a 3pin terminal block for transmitter
control, 1 Ethernet on an RJ45 connector for transmitter control

Supports up to 10.2Gbps (3.4Gbps bandwidth per graphic channel)
115200
Supports HDMI and HDCP

USB 1.1 and 2.0
Windows 7 and higher: Internet Explorer (32/64 bit) version 11, Firefox version 30,

Chrome version 35;
MAC:Chrome version 35, Firefox version 27, Safari version 7; Android OS: Chrome
version 35; iOS:Chrome version 35, Safari version 7

Aluminium
Convection, vents

18.75cm x 11.50cm x 2.54cm (7.38" x 4.53" x 1.00" ) W, D, H

PRODUCT WEIGHT:

SHIPPING
DIMENSION:

SHIPPING WEIGHT:

OPERATING
TEMPERATURE:

STORAGE
TEMPERATURE:

HUMIDITY:

POWER
CONSUMPTION:

VIBRATION:

SAFETY
REGULATORY
COMPLIANCE:

ENVIRONMENTAL
REGULATORY
COMPLIANCE:

ACCESSORIES:

0.5kg (1.1lbs) approx

34.50cm x 16.50cm x 5.20cm (13.58" x 6.50" x 2.05" ) W, D, H

1.0kg (2.2lbs) approx
0° to +40°C (32° to 104°F)

40° to +70°C (40° to 158°F)

10% to 90%, RHL noncondensing
12V DC, 900mA

ISTA 1A in carton (International Safe Transit Association)
CE

RoHs and WEEE

Power supply (12V, 2A)

OPTIONS:

RKT2B 19” rack mount; Kramer external IR sensor (CA35M/IRRN3 or
CA35M/IRRN50); Kramer IR emitter cable (CA35M/IRE10); Kramer BCUNIKat
cable; 2 IR emitter extension cables (15m & 20m)