Kramer TP-582T Users Manual

KRAMER ELECTRONIC S LTD.

USER MANUAL

MODELS:

TP-5 81T
HDMI Line Transmitter

TP-5 82T

HDMI Switcher/
Line Transmitter

TP-5 82 R

HDMI Line Receiver DA

P/N: 2900-000582 Rev 7

TP-581T, TP-582T and TP‑582R – Contents

i

Contents

1 Introduction 1
2 Getting Started 2

2.1 Achieving the Best Performance 2

2.2 Safety Instructions 3

2.3 Recycling Kramer Products 3

3 Overview 4

3.1 About HDBaseT™ Technology 5

3.2 Using Twisted Pair Cable 6

4 Defining the Devices 7

4.1 Your TP-581T HDMI Line Transmitter 7

4.2 Your TP-582T HDMI Switcher/Line Transmitter 8

4.3 Your TP-582R HDMI Line Receiver DA 9

5 Connecting the Devices 10

5.1 Connecting the TP-582T or TP-581T 10

5.2 Connecting the TP-582R 11

5.3 Controlling the AV Equipment via an IR Transmitter 13

5.4 Controlling the TP-582T via the REMOTE Terminal Block Connector 15

5.5 Connecting to a PC 15

5.6 Wiring the RJ-45 Connectors 16

5.7 Acquiring the EDID 17

6 Technical Specifications 18
7 Default EDID 19

Figures

Figure 1: TP-581T HDMI Line Transmitter 7
Figure 2: TP-582T HDMI Switcher/Line Transmitter 8
Figure 3: TP-582R HDMI Line Receiver DA 9
Figure 4: Connecting the TP-582T and TP‑582R 12
Figure 5: Controlling a DVD Player via the TP-582R 13
Figure 6: Controlling an LCD Display via the TP-582T 14
Figure 7: Connecting the Contact Closure Remote Control PINs 15
Figure 8: TP PINOUT 16

TP-581T, TP-582T and TP‑582R - Introduction

1

1 Introduction

Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been
providing a world of unique, creative, and affordable solutions to the vast range of
problems that confront video, audio, presentation, and broadcasting professionals
on a daily basis. In recent years, we have redesigned and upgraded most of our
line, making the best even better!

Our 1,000-plus different models now appear in 14 groups that are clearly defined
by function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers;
GROUP 3: Control Systems; GROUP 4: Format/Standards Converters; GROUP 5:
Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7:
Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9:
Room Connectivity; GROUP 10: Accessories and Rack Adapters; GROUP 11:
Sierra Video Products; GROUP 12: Digital Signage; GROUP 13: Audio; and
GROUP 14: Collaboration.

Congratulations on purchasing your Kramer MegaTOOLS® TP-581T HDMI Line

Transmitter, TP-582T HDMI Switcher/Line Transmitter or TP-582R HDMI Line
Receiver DA that are ideal for:

 Home theater, presentation and multimedia applications
 Rental and staging

2

TP-581T, TP-582T and TP‑582R - Getting Started

Go to http://www.kramerelectronics.com/support/product_downloads.asp
to check for up-to-date user manuals, application programs, and to check if
firmware upgrades are available (where appropriate).

This equipment is to be used only inside a building. It may only be
connected to other equipment that is installed inside a building.

i

!

2 Getting Started

We recommend that you:

 Unpack the equipment carefully and save the original box and packaging

materials for possible future shipment

 Review the contents of this user manual

2.1 Achieving the Best Performance

To achieve the best performance:

 Use only good quality connection cables (we recommend Kramer high-

performance, high-resolution cables) to avoid interference, deterioration in
signal quality due to poor matching, and elevated noise levels (often
associated with low quality cables)

 Do not secure the cables in tight bundles or roll the slack into tight coils
 Avoid interference from neighboring electrical appliances that may adversely

influence signal quality

 Position your Kramer TP-581T, TP-582T and TP-582R away from moisture,

excessive sunlight and dust

TP-581T, TP-582T and TP‑582R - Getting Started

3

Caution:

There are no operator serviceable parts inside the unit

Warning:

Use only the Kramer Electronics input power wall
adapter that is provided with the unit

Warning:

Disconnect the power and unplug the unit from the wall
before installing

!

2.2 Safety Instructions

2.3 Recycling Kramer Products

The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC
aims to reduce the amount of WEEE sent for disposal to landfill or incineration by
requiring it to be collected and recycled. To comply with the WEEE Directive,
Kramer Electronics has made arrangements with the European Advanced
Recycling Network (EARN) and will cover any costs of treatment, recycling and
recovery of waste Kramer Electronics branded equipment on arrival at the EARN
facility. For details of Kramer’s recycling arrangements in your particular country
go to our recycling pages at http://www.kramerelectronics.com/support/recycling/.

4

TP-581T, TP-582T and TP‑582R - Overview

Go to http://www.kramerelectronics.com/support/product_downloads.asp
to check for up-to-date user manuals, application programs, and to check if
firmware upgrades are available (where appropriate).

i

3 Overview

The TP-582T and TP-582R are a high-quality twisted pair transmitter and receiver
for HDMI, 100BaseT Ethernet, bidirectional RS-232 and IR signals.
With the TP-582T you can select one of two HDMI inputs, and convert it with the
100BaseT Ethernet, RS-232 and IR input signals to a twisted pair signal. The
TP-582R converts the twisted pair signal back to 100BaseT Ethernet, RS-232, IR
and two HDMI outputs, and de-embeds the audio to S/PDIF and TOSLINK® audio
outputs. The TP-581T is identical to the TP-582T but has only one HDMI input.

Since the TP-581T has only one input, it does not have the input selection control which the
TP-582T has (that is, contact closure, IR and front panel input selection).

The transmitter/receiver pair features:

 A maximum data transfer rate of 6.75Gbps (2.25Gbps per graphic channel)

(1080p@60Hz 36-bit) over a range of up to 130m (430ft) when using
BC−HDKat6a cables

 HDTV compatibility
 HDMI support for Deep Color, x.v.Color™, Lip Sync, HDMI Uncompressed

Audio Channels, Dolby TrueHD, DTS-HD, CEC

 3D pass-through
 HDCP compliance
 EDID PassThru, passes EDID/HDCP signals from source to display
 A bidirectional RS-232 interface over which commands and data can flow in

both directions via the RS-232 interface at rates up to 115200, allowing
status requests and control of the destination unit

 Bidirectional infrared interface for remote control of peripheral devices (see

Section 5.3)

 100BaseT Ethernet interface for connection to a network (see Section 5.5)
 LED status indicators for input, output, link and power

TP-581T, TP-582T and TP‑582R - Overview

5

The products described in this user manual are HDBaseT certified.

i

 Two RJ-45 CAT 5 output connectors: one for the line output and the other

for the Ethernet input

The compact MegaTOOLS® enclosures (for the transmitters and the receiver) let
you rack mount up to two units side-by-side in a 1U 19” rack space when using the
optional RK-T2B rack.

In addition, the TP-582T HDMI Switcher/Line Transmitter also features:

 Two HDMI inputs
 Momentary remote contact closure for input switching
 Front panel input select button
 IR remote control input switching (via the Kramer IR remote control

transmitter)

The TP-582R HDMI Line Receiver DA also features:

 One RJ-45 CAT 5 input connector
 Two HDMI outputs
 An S/PDIF digital audio output
 A TOSLINK® optical audio output

The TP-581T HDMI Line Transmitter also features:

 One HDMI input

3.1 About HDBaseT™ Technology

HDBaseT™ is an advanced all-in-one connectivity technology (Supported by the
HDBaseT Alliance). It is particularly suitable in the consumer home environment
as a digital home networking alternative where it enables you to replace numerous
cables and connectors by a single LAN cable used to transmit uncompressed full
high-definition video, audio, 100BaseT Ethernet, power over cable, as well as
various control signals.

6

TP-581T, TP-582T and TP‑582R - Overview

We strongly recommend that you use shielded twisted pair cable.

i

3.2 Using Twisted Pair Cable

Kramer engineers have developed special twisted pair cables to best match our
digital twisted pair products; the Kramer BC−HDKat6a (CAT 6 23 AWG cable)
significantly outperforms regular CAT 5 / CAT 6 cables.

TP-581T, TP-582T and TP‑582R - Defining the Devices

7

#

Feature

Function

1

LINE OUT RJ-45 Connector

Connects to the CAT 5 IN RJ-45 connector on the
TP-582R

2

HDMI IN Connector

Connects to the HDMI source

3

IR 3.5mm Mini Jack Connector

Connects to an external infrared transmitter / sensor
(receiver)

4

ETHERNET Connector

Connects to a network

5

RS-232 9-pin D-sub Connector

Connects to an RS-232 port

6

5V DC

+5V DC connector for powering the unit

7

IN LED

Lights when an HDMI input device is connected

8

OUT LED

Lights when an HDMI output device is detected

9

LINK LED

Lights when the TP connection is active

10

ON LED

Lights when receiving power

4 Defining the Devices

This section describes the:

 TP-581T HDMI Line Transmitter, see Section 4.1
 TP-582T HDMI Switcher/Line Transmitter, see Section 4.2
 TP-582R HDMI Line Receiver DA, see Section 4.3

4.1 Your TP-581T HDMI Line Transmitter

Figure 1 defines the TP-581T:

Figure 1: TP-581T HDMI Line Transmitter

8

TP-581T, TP-582T and TP‑582R - Defining the Devices

#

Feature

Function

1

LINE OUT RJ-45 Connector

Connects to the CAT 5 IN RJ-45 connector on the
TP-582R

2

HDMI IN 1 Connector

Connects to the HDMI source 1

3

HDMI IN 2 Connector

Connects to the HDMI source 2

4

IR 3.5mm Mini Jack Connector

Connects to an external infrared transmitter/sensor
(receiver)

5

ETHERNET Connector

Connects to a network

6

REMOTE CONTROL Terminal
Block

Connects to contact closure switches (see

Section 5.4)

7

RS-232 9-pin D-sub Connector

Connects to an RS-232 port

8

5V DC

+5V DC connector for powering the unit

9

REMOTE IR Sensor

Senses commands from the Kramer IR remote
control device

Note that the IR sensor is only used to select the TP­582T inputs. These IR signals cannot be transmitted to
the TP-582R

10

IR LED

Lights when an infrared signal is detected

11

INPUT SELECT Switch

Press to toggle between HDMI inputs

12

IN 1 LED

Lights when the HDMI 1 input device is connected

13

IN 2 LED

Lights when the HDMI 2 input device is connected

14

OUT LED

Lights when an HDMI output device is detected

15

LINK LED

Lights when the TP connection is active

16

ON LED

Lights when receiving power

4.2 Your TP-582T HDMI Switcher/Line Transmitter

Figure 2 defines the TP-582T:

Figure 2: TP-582T HDMI Switcher/Line Transmitter

TP-581T, TP-582T and TP‑582R - Defining the Devices

9

#

Feature

Function

1

LINE IN RJ-45 Connector

Connects to the CAT 5 OUT RJ-45 connector on the
TP-581T or TP-582T

2

HDMI OUT 1 Connector

Connects to the HDMI acceptor 1

3

HDMI OUT 2 Connector

Connects to the HDMI acceptor 2

4

S/PDIF Connector

Connects to a digital audio acceptor

5

TOSLINK® Connector

Connects to an optical audio acceptor

6

ETHERNET Connector

Connects to a network

7

RS-232 9-pin D-sub Connector

Connects to an RS-232 port

8

5V DC

+5V DC connector for powering the unit

9

IR 3.5mm Mini Jack Connector

Connects to an external infrared transmitter/sensor
(receiver)

10

IN LED

Lights when an input device is connected

11

OUT 1 LED

Lights when the HDMI 1 output device is connected

12

OUT 2 LED

Lights when the HDMI 2 output device is connected

13

LINK LED

Lights when the TP connection is active

14

ON LED

Lights when receiving power

4.3 Your TP-582R HDMI Line Receiver DA

Figure 3 defines the TP-582R:

Figure 3: TP-582R HDMI Line Receiver DA

10

TP-581T, TP-582T and TP‑582R - Connecting the Devices

Always switch off the power to each device before connecting it to your

TP-581T, TP-582T and TP‑582R. After connecting your TP-581T,
TP-582T and TP‑582R, connect its power and then switch on the

power to each device.

i

5 Connecting the Devices

You can use the TP-581T HDMI Line Transmitter or the TP-582T HDMI
Switcher/Line Transmitter with the TP-582R HDMI Line Receiver DA to configure

an HDMI transmitter/receiver system.

 To connect the TP-582T or TP-581T, see Section 5.1
 To connect the TP-582R, see Section 5.2
 To remotely control the AV equipment, see Section 5.3

5.1 Connecting the TP-582T or TP-581T

To connect the TP-582T or TP-581T as shown in the example in Figure 4, do the
following:

1. Connect the HDMI IN1 connector to the first HDMI source (for example, a
DVD player 1) for the TP-582T.

On the TP-581T, connect the HDMI IN connector to the HDMI source.

2. Connect the HDMI IN2 connector to the second HDMI source (for example, a
DVD player 2).

There is no HDMI IN 2 connector for the TP-581T.

3. Connect the ETHERNET RJ-45 connector to a network.

4. Connect the RS-232 9-pin D-sub connector to a computer.

5. Connect the IR 3.5mm mini jack to an IR emitter.

6. Connect the REMOTE CONTROL terminal block to an external set of
switches (not shown in Figure 4).

7. Connect the LINE OUT RJ-45 connector over CAT 5 twisted pair to the

TP-582R LINE IN connector.

TP-581T, TP-582T and TP‑582R - Connecting the Devices

11

8. Connect the 5V DC power adapter to the power socket and connect the
adapter to the mains electricity (not shown in Figure 4).

5.2 Connecting the TP-582R

To connect the TP-582R as shown in the example in Figure 4, do the following:

1. Connect the HDMI OUT 1 connector to the first HDMI acceptor (for example,
LCD display 1).

2. Connect the HDMI OUT 2 connector to the first HDMI acceptor (for example,
LCD display 2).

3. Connect the ETHERNET RJ-45 connector to a network.

4. Connect the RS-232 9-pin D-sub connector to an RS-232 port (for example,
a projector).

5. Connect the IR 3.5mm mini jack to an IR sensor.

6. Connect S/PDIF RCA connector to a digital audio acceptor (for example, a
digital audio recorder).

7. Connect TOSLINK® connector to an optical audio acceptor (for example, a
digital audio recorder) (not shown in Figure 4).

8. Connect the LINE IN RJ-45 connector over CAT 5 twisted pair to the
TP-581T or TP-582T LINE OUT connector.

9. If required, acquire the EDID (see Section 5.6).

10. Connect the 5V DC power adapter to the power socket and connect the
adapter to the mains electricity (not shown in Figure 4).

12

TP-581T, TP-582T and TP‑582R - Connecting the Devices

Figure 4: Connecting the TP-582T and TP‑582R

TP-581T, TP-582T and TP‑582R - Connecting the Devices

13

5.3 Controlling the AV Equipment via an IR Transmitter

Since the IR signal on the TP-581T/TP-582T and the TP-582R is bidirectional, you
can use a remote control transmitter to send commands (to the AV equipment)
from either end of the transmitter /Receiver system. To do so you have to use the
Kramer external IR sensor and the Kramer IR emitter cable.

Note that the IR sensor is only used to select the TP-582T inputs. These IR
signals cannot be transmitted to the TP-582R.

Figure 5 illustrates how to control the DVD player using a remote control via the

TP-582R.

Figure 5: Controlling a DVD Player via the TP-582R

14

TP-581T, TP-582T and TP‑582R - Connecting the Devices

Figure 6 illustrates how to control the LCD display via the TP-581T/TP-582T.

Figure 6: Controlling an LCD Display via the TP-582T

TP-581T, TP-582T and TP‑582R - Connecting the Devices

15

Do not connect more than one PIN to the GND PIN at the same time.

i

To select input 1,
momentarily connect
the 1 PIN to the G PIN

To select input 2,
momentarily connect
the 2 PIN to the G PIN

5.4 Controlling the TP-582T via the REMOTE Terminal Block Connector

The contact closure remote control pins operate in a similar way to the INPUT
SELECT button. Using the contact closure remote control you can select the HDMI
input. To do so, momentarily connect the required input pin (IN 1 or IN2) on the
REMOTE CONTROL terminal block connector to the GND (ground) pin, as Figure

7 illustrates.

Figure 7: Connecting the Contact Closure Remote Control PINs

5.5 Connecting to a PC

You can connect to the transmitter/receiver system via an RS-232 connection
using, for example, a PC. Note that a null-modem adapter/connection is not
required.

To connect via RS-232, connect the RS-232 9-pin D-sub rear panel port on the
transmitter/receiver system unit via a 9-wire straight cable (pin 2 to pin 2, pin 3 to
pin 3, pin 5 to pin 5) to the RS-232 9-pin D-sub port on your PC.

16

TP-581T, TP-582T and TP‑582R - Connecting the Devices

Note, that the cable ground shielding must be connected / soldered to
the connector shield.

EIA /TIA 568B

Figure 8: TP PINOUT

PIN

Wire Color

1

Orange / White

2

Orange

3

Green / White

4

Blue 5 Blue / White

6

Green

7

Brown / White

8

Brown

i

5.6 Wiring the RJ-45 Connectors

This section defines the TP pinout, using a straight pin-to-pin cable with RJ-45
connectors.

TP-581T, TP-582T and TP‑582R - Connecting the Devices

17

The EDID is acquired only if the power is disconnected and then
reconnected

i

5.7 Acquiring the EDID

To acquire the EDID, connect the transmitter and receiver system as described in

Section 5.

Once the power is connected, the system acquires the EDID according to the
following priorities:

 If only one output is connected, the EDID is acquired from that output
 If both outputs are connected, the EDID is acquired from the output

connected to HDMI OUT 1

 If no output is connected, the default EDID is acquired

To acquire the EDID of a newly connected output:

1. Disconnect the power on the TP-582R.

2. Connect the new acceptor (to HDMI OUT 1, if two outputs are connected).

3. Connect the power.

18

TP-581T, TP-582T and TP‑582R - Technical Specifications

TP-581T

TP-582T

TP-582R

INPUTS:

1 HDMI connector

2 HDMI connectors
1 remote contact

closure on a
terminal block
connector

1 RJ-45 connector

OUTPUTS:

1 RJ-45 connector

1 RJ-45 connector

2 HDMI connectors
1 TOSLINK® optical
audio
1 S/PDIF in an RCA
connector

PORTS:

1 IR on a 3.5mm
mini jack
1 Ethernet
100BaseT on an
RJ-45 connector
1 RS-232 on a 9-pin
D-sub connector

1 IR on a 3.5mm
mini jack
1 Ethernet
100BaseT on an
RJ-45 connector
1 RS-232 on a 9-pin
D-sub connector

1 IR on a 3.5mm
mini jack
1 Ethernet
100BaseT on an
RJ-45 connector
1 RS-232 on a 9-pin
D-sub connector

BANDWIDTH:

Supports up to 2.25Gbps bandwidth per graphic channel

RS-232 BAUD RATE:

115200

COMPLIANCE WITH
HDMI STANDARD:

Supports HDMI and HDCP

POWER
CONSUMPTION:

5V DC, 800mA

5V DC, 800mA

5V DC, 1.55A

OPERATING
TEMPERATURE:

0° to +40°C (32° to 104°F)

STORAGE
TEMPERATURE:

-40° to +70°C (-40° to 158°F)
HUMIDITY:

10% to 90%, RHL non-condensing

DIMENSIONS:

18.8cm x 11.4cm x 2.4cm (7.4" x 4.5" x 1.0") W, D, H

WEIGHT:

0.6kg (1.4lbs)

INCLUDED
ACCESSORIES:

Power supply
OPTIONS:

RK-T2B 19” rack mount, Kramer BC−HDKat6a cable

Specifications are subject to change without notice at http://www.kramerelectronics.com

6 Technical Specifications

TP-581T, TP-582T and TP‑582R - Default EDID

19

7 Default EDID

The factory default EDID is listed below.

Monitor

Model name............... TP-582

Manufacturer............. KRM

Plug and Play ID......... KRM5820

Serial number............ 505-707455010

Manufacture date......... 2009, ISO week 10

Filter driver............ None

-------------------------

EDID revision............ 1.3

Input signal type........ Digital

Color bit depth.......... Undefined

Display type............. RGB color

Screen size.............. 520 x 320 mm (24.0 in)

Power management......... Standby, Suspend, Active off/sleep

Extension blocs.......... 1 (CEA-EXT)

-------------------------

DDC/CI................... Not supported

Color characteristics

Default color space...... Non-sRGB

Display gamma............ 2.20

Red chromaticity......... Rx 0.674 - Ry 0.319

Green chromaticity....... Gx 0.188 - Gy 0.706

Blue chromaticity........ Bx 0.148 - By 0.064

White point (default).... Wx 0.313 - Wy 0.329

Additional descriptors... None
Timing characteristics

Horizontal scan range.... 30-83kHz

Vertical scan range...... 56-76Hz

Video bandwidth.......... 170MHz

CVT standard............. Not supported

GTF standard............. Not supported

Additional descriptors... None

Preferred timing......... Yes

Native/preferred timing.. 1280x720p at 60Hz (16:10)

Modeline............... "1280x720" 74.250 1280 1390 1430 1650 720 725 730 750 +hsync +vsync

Standard timings supported
720 x 400p at 70Hz - IBM VGA
640 x 480p at 60Hz - IBM VGA
640 x 480p at 75Hz - VESA
800 x 600p at 60Hz - VESA
800 x 600p at 75Hz - VESA
1024 x 768p at 60Hz - VESA
1024 x 768p at 75Hz - VESA
1280 x 1024p at 75Hz - VESA
1280 x 1024p at 60Hz - VESA STD
1600 x 1200p at 60Hz - VESA STD
1152 x 864p at 75Hz - VESA STD

EIA/CEA-861 Information

Revision number.......... 3

IT underscan............. Supported

Basic audio.............. Supported

YCbCr 4:4:4.............. Supported

YCbCr 4:2:2.............. Supported

Native formats........... 1

Detailed timing #1....... 1920x1080p at 60Hz (16:10)

Modeline............... "1920x1080" 148.500 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync

Detailed timing #2....... 1920x1080i at 60Hz (16:10)

Modeline............... "1920x1080" 74.250 1920 2008 2052 2200 1080 1084 1094 1124 interlace +hsync +vsync

Detailed timing #3....... 1280x720p at 60Hz (16:10)

Modeline............... "1280x720" 74.250 1280 1390 1430 1650 720 725 730 750 +hsync +vsync

Detailed timing #4....... 720x480p at 60Hz (16:10)

20

TP-581T, TP-582T and TP‑582R - Default EDID

Modeline............... "720x480" 27.000 720 736 798 858 480 489 495 525 -hsync -vsync

CE video identifiers (VICs) - timing/formats supported
1920 x 1080p at 60Hz - HDTV (16:9, 1:1)
1920 x 1080i at 60Hz - HDTV (16:9, 1:1)
1280 x 720p at 60Hz - HDTV (16:9, 1:1) [Native]
720 x 480p at 60Hz - EDTV (16:9, 32:27)
720 x 480p at 60Hz - EDTV (4:3, 8:9)
720 x 480i at 60Hz - Doublescan (16:9, 32:27)
720 x 576i at 50Hz - Doublescan (16:9, 64:45)
640 x 480p at 60Hz - Default (4:3, 1:1)
NB: NTSC refresh rate = (Hz*1000)/1001

CE audio data (formats supported)
LPCM 2-channel, 16/20/24 bit depths at 32/44/48 kHz

CE vendor specific data (VSDB)
IEEE registration number. 0x000C03

CEC physical address..... 1.0.0.0

Maximum TMDS clock....... 165MHz

CE speaker allocation data

Channel configuration.... 2.0

Front left/right......... Yes

Front LFE................ No

Front center............. No

Rear left/right.......... No

Rear center.............. No

Front left/right center.. No
Rear left/right center... No

Rear LFE................. No

Report information

Date generated........... 29/04/2012

Software revision........ 2.60.0.964

Data source.............. Real-time 0x0031

Operating system......... 5.1.2600.2.Service Pack 3

Raw data
00,FF,FF,FF,FF,FF,FF,00,2E,4D,20,58,01,01,01,01,0A,13,01,03,80,34,20,78,EA,B3,25,AC,51,30,B4,26,
10,50,54,A5,4B,00,81,80,A9,40,71,4F,01,01,01,01,01,01,01,01,01,01,01,1D,00,72,51,D0,1E,20,6E,28,
55,00,07,44,21,00,00,1E,00,00,00,FF,00,35,30,35,2D,37,30,37,34,35,35,30,31,30,00,00,00,FC,00,54,
50,2D,35,38,32,20,20,20,20,20,20,0A,00,00,00,FD,00,38,4C,1E,53,11,00,0A,20,20,20,20,20,20,01,86,
02,03,1B,F1,48,10,05,84,03,02,07,16,01,23,09,07,07,65,03,0C,00,10,00,83,01,00,00,02,3A,80,18,71,
38,2D,40,58,2C,45,00,07,44,21,00,00,1E,01,1D,80,18,71,1C,16,20,58,2C,25,00,07,44,21,00,00,9E,01,
1D,00,72,51,D0,1E,20,6E,28,55,00,07,44,21,00,00,1E,8C,0A,D0,8A,20,E0,2D,10,10,3E,96,00,07,44,21,
00,00,18,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,47

For the latest information on our products and a list of Kramer distributors,
visit our Web site where updates to this user manual may be found.

We welcome your questions, comments, and feedback.

Web site: www.kramerelectronics.com
E-mail: [e-mail]

SAFETY WARNING

Disconnect the unit from the power
supply before opening and servicing

P/N:

2900-000582

Rev:

7

!