Kramer TP-581T Data Sheet

TP-581T

HDMI, Bidirectional RS-232, Ethernet & IR over Twisted Pair Transmitter

The TP-581T is a high-quality twisted pair
transmitter for HDMI, Ethernet 100BaseT,
bidirectional RS-232 and IR signals. The TP-581T
takes the HDMI input, and converts it with the
Ethernet 100BaseT, RS-232 and IR input signals
to a twisted pair signal. The TP-582R converts the
twisted pair signal back to Ethernet 100BaseT,
RS-232, IR and two HDMI outputs, and de­embeds the audio to S/PDIF and TOSLINK® audio
outputs.

Max. Data Rate - 2.25Gbps.
HDTV Compatible.
HDCP Compliance.
HDMI Support - HDMI (V.1.4 with Deep Color, x.v.Color™, Lip Sync, HDMI Uncompressed Audio Channels, Dolby TrueHD,

DTS-HD, CEC).

3D Pass-Through.
EDID PassThru - Passes EDID/HDCP signals from source to display.
Bidirectional RS-232 Interface - Commands and data can flow in both directions via the RS-232 interface, allowing status

requests and control of the destination unit.

Ethernet Interface - Passes 100BaseT.
System Range - Up to 100m (330ft).
Cable - Requires shielded twisted pair (STP) cable. For optimum range and performance use, use Kramer's BC-

DGKat524, BC-DGKat623 and BC-DGKat723 cables. Note that the transmission range depends on the signal resolution,
graphics card and display used. The distance using non-Kramer CAT 5, CAT 6, and CAT 7 cables may not reach these
ranges. Use only shielded cable where both ends of the shield are soldered to ground.

Control - Front panel.
Indicators - Status LEDs for input selection, output, link and power.
Compact MegaTOOLS® - 2 units can be rack mounted side-by-side in a 1U rack space with the optional RK-T2B universal

rack adapter.

FEATURES

TP-581T

TECHNICAL SPECIFICATIONS

INPUTS:

1 HDMI connector, 1 IR on a 3.5mm mini jack, 1 Ethernet 100BaseT on an RJ-45 connector, 1
RS-232 on a 9-pin D-sub connector.

OUTPUTS:

1 RJ-45 connector.

BANDWIDTH:

Supports up to 2.25Gbps bandwidth per graphic channel.

COMPLIANCE WITH HDMI
STANDARD:

Supports HDMI and HDCP.

POWER SOURCE:

5V DC, 800mA.

DIMENSIONS:

18.8cm x 11.4cm x 2.4cm (7.4" x 4.5" x 1.0") W, D, H.

WEIGHT:

0.6kg (1.4lbs).

ACCESSORIES:

Power supply.

OPTIONS:

RK-T2B 19” rack mount.