Kramer TP-580TXR Datasheet

TP-580TXR

HDMI, Bidirectional RS−232 & IR over Extended Range HDBaseT Twisted Pair Transmitter

The TP−580TXR is an extended range,
HDBaseT twisted pair transmitter for HDMI,
bidirectional RS−232 and IR signals. The
TP

−580TXR inputs HDMI, RS−232, and IR
signals and converts them into an HDBaseT
twisted pair signal that it transmits to a
TP

−580RXR receiver.

Max. Data Rate - 10.2Gbps (3.4Gbps per graphic channel).
HDTV Compatible.
HDCP Compliance.
HDBaseT™ Technology.
HDMI Support - Deep Color, x.v.Color™, Lip Sync, HDMI Uncompressed Audio Channels, Dolby TrueHD, DTS−HD,

CEC.

3D Pass-Through.
EDID PassThru - Passes EDID signals between the source and display.
2K & 4K Support.
Bidirectional RS-232 & IR Interface. - Commands and data can flow in both directions via the RS−232 interface,

allowing status requests and remote control of the destination unit.

System Range - Up to 130m (430ft) normal mode; up to 180m (590ft) Ultra mode (1080p @60Hz @24bpp) when

using BC−DGKat623 cables.

Cable - Requires shielded twisted pair (STP) cable. For optimum range and performance use, use Kramer's

BC−DGKat524, BC−DGKat623 and BC−DGKat7a23 cables. Note that the transmission range depends on the signal
resolution, graphics card and display used. The distance using non−Kramer CAT 5, CAT 6, and CAT 7 cables may
not reach these ranges.

Indicators - Status LEDs for input, output, link and power.
Compact DigiTOOLS® - 3 units can be rack mounted side−by−side in a 1U rack space with the optional RK−3T

universal rack adapter.

FEATURES

TP-580TXR

TECHNICAL SPECIFICATIONS

INPUTS:

1 HDMI connector.

OUTPUTS:

1 HDBaseT twisted pair RJ−45 connector.

PORTS:

1 IR on a 3.5mm mini jack, 1 RS−232 on a 9−pin D−sub connector.

BANDWIDTH:

10.2Gbps (3.4Gbps per graphic channel).

RS-232 BAUD RATE:

115200.

COMPLIANCE WITH HDMI STANDARD:

Supports HDMI and HDCP.

POWER CONSUMPTION:

12V DC, 210mA.

DIMENSIONS:

18.8cm x 11.4cm x 2.4cm (7.4" x 4.5" x 1.0") W, D, H.

WEIGHT:

0.6kg (1.4lbs).

ACCESSORIES:

Power supply.

OPTIONS:

RK−T2B 19” rack mount.