KRAMER ELECTRONICS LTD.
USER MANUAL
MODELS:
PT-110xl, UXGA Line Transmitter
WP-110, XGA Line Transmitter
PT-120xl, XGA Line Receiver
TP-120, XGA Line Receiver
P/N: 2900-300338 Rev 2
PT-110xl, WP-110, PT-120xl, TP-120 – Contents
i
Contents
1 Introduction 1
2 Getting Started 2
2.1 Achieving the Best Performance 2
2.2 Safety Instructions 2
2.3 Recycling Kramer Products 3
2.4 About the Power Connect™ Feature 3
2.5 Shielded Twisted Pair (STP) / Unshielded Twisted Pair (UTP) 3
3 PT-110xl UXGA Line Transmitter 4
3.1 Your PT-110xl UXGA Line Transmitter 4
3.2 Connecting the PT-110xl UXGA Line Transmitter 5
3.3 Capturing the EDID 5
3.4 Loading the Default EDID 6
4 WP-110 XGA Line Transmitter 7
4.1 Your WP-110 XGA Line Transmitter 7
4.2 Installing the WP-110 XGA Line Transmitter 9
4.3 Connecting the WP-110 to the TP-120 9
5 PT-120xl XGA Line Receiver 11
5.1 Your PT-120xl XGA Line Receiver 11
5.2 Connecting the PT-120xl XGA Line Receiver 12
6 TP-120 XGA Line Receiver 13
6.1 Your TP-120 XGA Line Receiver 13
6.2 Connecting the TP-120 XGA Line Receiver 13
6.3 Wiring the CAT 5 LINE IN / LINE OUT RJ-45 Connectors 14
7 Technical Specifications 15
Figures
Figure 1: PT-110xl UXGA Line Transmitter 4
Figure 2: Connecting the PT-110xl UXGA Line Transmitter 5
Figure 3: WP-110 XGA Line Transmitter 8
Figure 4: Connecting the WP-110 to a TP-120 10
Figure 5: PT-120xl XGA Line Receiver 11
Figure 6: Connecting the PT-110xl to a PT-120xl 12
Figure 7: TP-120 XGA Line Receiver 13
Figure 8: CAT 5 PINOUT 14
PT-110xl, WP-110, PT-120xl, TP-120 - Introduction
1
1 Introduction
Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been
providing a world of unique, creative, and affordable solutions to the vast range of
problems that confront the video, audio, presentation, and broadcasting
professional on a daily basis. In recent years, we have redesigned and upgraded
most of our line, making the best even better!
Our 1,000-plus different models now appear in 14 groups that are clearly defined
by function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers;
GROUP 3: Control Systems; GROUP 4: Format/Standards Converters; GROUP 5:
Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7:
Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9:
Room Connectivity; GROUP 10: Accessories and Rack Adapters; GROUP 11:
Sierra Video Products; GROUP 12: Digital Signage; GROUP 13: Audio; and
GROUP 14: Collaboration.
Thank you for purchasing the Kramer PT-110xl UXGA Line Transmitter, WP-110
XGA Line Transmitter, Kramer Pico TOOLS PT-120xl XGA Line Receiver, and/or
Kramer TOOLS TP-120 XGA Line Receiver, which are ideal for:
Presentation and multimedia applications
Long-range graphics distribution for schools, hospitals, security, and stores
2
PT-110xl, WP-110, PT-120xl, TP-120 - Getting Started
2 Getting Started
We recommend that you:
Unpack the equipment carefully and save the original box and packaging
materials for possible future shipment
Review the contents of this user manual
Go to http://www.kramerelectronics.com/support/product_downloads.asp
to check for up-to-date user manuals, application programs, and to check
if firmware upgrades are available (where appropriate).
2.1 Achieving the Best Performance
To achieve the best performance:
Use only good quality connection cables (we recommend Kramer high-
performance, high-resolution cables) to avoid interference, deterioration in
signal quality due to poor matching, and elevated noise levels (often
associated with low quality cables)
Do not secure the cables in tight bundles or roll the slack into tight coils
Avoid interference from neighboring electrical appliances that may adversely
influence signal quality
Position your Kramer PT-110xl, WP-110, PT-120xl, TP-120 away from
moisture, excessive sunlight and dust
This equipment is to be used only inside a building. It may only be
connected to other equipment that is installed inside a building.
2.2 Safety Instructions
Caution:
There are no operator serviceable parts inside the unit
Warning:
Use only the Kramer Electronics input power wall
adapter that is provided with the unit
Warning:
Disconnect the power and unplug the unit from the wall
before installing
i
!
!
PT-110xl, WP-110, PT-120xl, TP-120 - Getting Started
3
2.3 Recycling Kramer Products
The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC
aims to reduce the amount of WEEE sent for disposal to landfill or incineration by
requiring it to be collected and recycled. To comply with the WEEE Directive,
Kramer Electronics has made arrangements with the European Advanced
Recycling Network (EARN) and will cover any costs of treatment, recycling and
recovery of waste Kramer Electronics branded equipment on arrival at the EARN
facility. For details of Kramer’s recycling arrangements in your particular country
go to our recycling pages at http://www.kramerelectronics.com/support/recycling/.
2.4 About the Power Connect™ Feature
The Power Connect feature applies as long as the cable can carry power. This
feature is available when using TP cable and the distance does not exceed 50m
(164ft) on standard CAT 5 cable. For longer distances, use heavier gauge cable
(TP cable is still suitable for the video/audio transmission, but not for feeding the
power at these distances).
For a TP cable exceeding a distance of 50m, connect separate power supplies to
the transmitter and to the receiver simultaneously.
2.5 Shielded Twisted Pair (STP) / Unshielded Twisted Pair
(UTP)
We recommend that you use Shielded Twisted Pair (STP) cable, and stress that
the compliance to electromagnetic interference was tested using STP cable. There
are different levels of STP cable available, and we advise you to use the best
quality STP cable that you can afford. Our non-skew-free cable, Kramer BC-STP
is intended for analog signals where skewing is not an issue.
In cases where there is skewing, our Unshielded Twisted Pair (UTP) skew-free
cable, Kramer BC-XTP, may be advantageous, and UTP cable might also be
preferable for long range applications. In any event when using UTP cable, it is
advisable to ensure that the cable is installed far away from electric cables, motors
and so on, which are prone to create electrical interference.
Loading...