Overview
3
3 Overview
The high performance PIP-200xl/PIP-300 is a picture-in-picture inserter for
composite video, s-Video (Y/C) and component video (YUV1).
The PIP-300 and PIP-200xl feature:
A multi standard picture-in-picture video inserter designed to accept three2
video sources and display them all on the same screen simultaneously in two
layers
Three2 sets of composite video, s-Video and component video inputs, and
a composite video, s-Video and component video output
Non-volatile memory that retains the last setting, after switching the
power off and then on again3
Using the PIP-200xl or the PIP-300 you can do the following:
Position sources on the screen as desired and select their size from a list
Put a text label in each inserted picture
Put a border around each inserted picture
Utilize sources of different formats and standards4
In addition, the PIP-200xl/PIP-300:
Includes 10-bit video A/D and D/A converters throughout the unit, to
ensure the highest quality video
Is controllable via the front panel buttons and the user-friendly OSD and
LCD, as well as via RS-232
Is dependable, rugged, and fits in one vertical space of a standard 19” rack
To achieve the best performance:
Connect only good quality connection cables, thus avoiding interference,
deterioration in signal quality due to poor matching, and elevated noiselevels (often associated with low quality cables)
Avoid interference from neighboring electrical appliances and position your
Kramer PIP-200xl/PIP-300 away from moisture, excessive sunlight and dust
1 Y, B-Y, R-Y (sometimes called Y, Pb/Cb, Pr/Cr)
2 Two for the PIP-200xl
3 Provided that the last setting was valid for at least 30 seconds before switching the machine OFF
4 For example, a PAL s-Video input could be inserted into a composite video NTSC source, and outputted to composite
video, s-Video and component video formats