Kramer Pico TOOLS PT101DVI, Pico TOOLS PT101DVI-R User Manual

Kramer Electronics, Ltd.

USER MANUAL

Model:

PT101DVI

DVI Repeater

Contents

i

Contents

1 Introduction 1
2 Getting Started 1
3 Overview 2
4 Connecting a PT101D VI DVI Re pe ate r 3
5 Technical Specifications 3

Figures

Figure 1: PT101DVI DVI Repeater 2
Figure 2: Extending the DVI Transmission Range using a PT101DVI DVI Repeater 4

Tables

Table 1: PT101DVI DVI Repeater Features 2
Table 2: Technical Specifications of the PT101DVI 3

P/N: 2900-0001014 A1

PT101DVI-R ADDENDUM to the PT101DVI User Manual

This addendum to the PT101DVI user manual describes the PT101DVI-R DVI
Repeater.

The PT101DVI-R DVI Repeater:

 Equalizes and reclocks the DVI signal at the end of a long cable(s)
 Effectively reconstructs the DVI signal and retransmits it
 Includes long cable skew alignment that supports the looping of

multiple PT101DVI-R units in a chain, while preserving the quality of the
original signal

Note that only the digital signal (DVI-D) single link is available on the DVI
connector.

Figure A1 and Table A1 define the PT101DVI-R DVI Repeater:

Figure A1: PT101DVI-R

Table A1: PT101DVI-R Features

# Feature Function

1 POWER LED Illuminates when receiving power

2 INPUT DVI

Connector

Connect to the DVI source

3 12V DC +12V DC connector for powering

the unit

4 OUTPUT DVI

Connector

Connect to the DVI INPUT on the
next PT101DVI-R unit or to a DVI
acceptor

_____________________________________________________________

Caution – No operator-serviceable parts inside unit.

Warning – Use only the Kramer Electronics input power wall adapter that is

provided with this unit1.

Warning – Disconnect power and unplug unit from wall before installing or
removing device or servicing unit.

1 For example: model number SCP1200500P, part number 2535-000251