Kramer PA-240Z Data Sheet

PA-240Z

|Speakers |WEB-CTRL

240W Power Amplifier

PA−240Z is a high−performance, selectable Hi−Z
(70V/100V) or Lo−Z (4Ω/8Ω) power amplifier featuring
balanced and unbalanced inputs and additional
line−level output. This versatile amplifier features
built−in DSP, auto−standby and maximum durability.
PA−240Z is suitable for a vast range of AV
installations

FEATURES

High-performance Amplifier-With built−in DSP and additional balanced stereo line−level output.

PA−240Z features flat frequency response, unmatched sonic performance, excellent signal to noise
ratio, and extraordinarily low distortion levels

Adaptable to Any AV Installation-Switch between Lo−Z and Hi−Z to accommodate any type of

loudspeaker installation. Select 1 Channel of 240W into a 70V/100V line or 2 channels of 120W into
4Ω/8Ω

Individual Mix Per Output-Each output supports an independent input mix with master volume,

3−band parametric EQ, and selectable high−pass filter. Create one output mix and EQ settings
suitable for the venue and another for recording or cascading more amplifiers, powered speakers or
subwoofers according to any AV installation requirements

Professional, Studio Grade Signal Conversion Technology-Includes the latest generation 32–bit

advanced Digital Analog Converter architecture to achieve excellent dynamic performance and
improved tolerance to clock jitter. Maintains the quality of the original audio signal with selectable
sampling rates up to 96 kHz

Durable and Reliable-PA−240Z is immune to failure. It includes layers of protection against

over−current, DC voltage at the outputs, high frequency, and over−heating with intelligent,
heat−sensitive fans for added protection

Flexible Control Options-Control locally via RS−232 serial commands or remotely, via embedded

web pages over Ethernet

Power Efficient-This super−efficient amplifier includes auto−standby for power saving and cost

reducing operation. No need to rely on default auto−standby settings. Adjust your noise floor
threshold based on exactly when your amplifier needs to go into sleep mode and when it needs to
wake up

Easy Installation-½ 19” size enables mounting in a 1U rack space with the recommended rack

adapter



TECHNICAL SPECIFICATIONS

Inputs:

Outputs:

Input Sensitivity:

Output Power:

Amplifier Type:

Maximum Voltage
Gain:

Dynamic Range:

Frequency Response:

S/N Ratio:

Controls:

Audio THD + Noise:

Audio 2nd Harmonic:

Power Source:

1 unbalanced stereo on a 3.5mm connector; 1 balanced stereo +4dBu/10kΩ on a 5
pin terminal block

1 balanced stereo line level on a 5−pin terminal block; 1 stereo or 1 mono speaker
output on a 4 pin large terminal block

Full power @ 0.3V (–10dBV)

2 x 120W @ 4Ω or 8Ω; 1 x 240W @ 70V or 100V

Class D

26dB SE / 32dB BTL

119dB

20Hz to 20kHz @ +/−1dB

80dB −10dBV, 20 Hz − 20 kHz

Screw trimmer amplifier attenuator, IP and RS−232

THD+N (1kHz @ 1W) 0.003 %

0.08% @ 75W RMS @ 4Ω 6.67kHz

Universal mains operational voltage 85VAC – 265VAC (full power at 120V – 230V)

Total System
Efficiency:

Included Accessories:

Product Dimension

Product Weight

Shipping Dimension

Shipping Weight

89.5%

Power cord

21.46cm x 16.30cm x 4.36cm (8.45" x 6.42" x 1.72" ) W, D, H

0.9kg (2.1lbs) approx

40.50cm x 29.70cm x 9.00cm (15.94" x 11.69" x 3.54" ) W, D, H

1.5kg (3.4lbs) approx