Kramer PA-240NET Data Sheet

PA-240Net

|Speakers |Ethernet-RJ-45

240W Networked Power Amplifier

PA−240Net is a high−performance, selectable Hi−Z
(70V/100V) or Lo−Z (4Ω/8Ω) power amplifier featuring
balanced and unbalanced inputs and additional
line−level output and Dante interface. This versatile
amplifier features built−in DSP, auto−standby and
maximum durability. PA−240Net is suitable for a vast
range of AV installations

FEATURES

High-performance Amplifier-With built−in DSP and additional balanced stereo line−level output.

PA−240Net features flat frequency response, unmatched sonic performance, excellent signal to noise
ratio, and extraordinarily low distortion levels

Adaptable to Any AV Installation-Switch between Lo−Z and Hi−Z to accommodate any type of

loudspeaker installation. Select 1 Channel of 240W into a 70V/100V line or 2 channels of 120W into
4Ω/8Ω

Easy, Scalable and Cost-Effective Dante Audio Networking-Dante makes networking any size audio

installation easy by providing digital signal transmission over a local area network using standard
Internet protocols. The unit is part of the expanding family of products that make up Kramer’s Dante
ecosystem. These products are fully compatible and integrate into any Dante–enabled system

Individual Mix Per Output-Each output supports an independent input mix with master volume,

3−band parametric EQ, and selectable high−pass filter. Create one output mix and EQ settings
suitable for the venue and another for recording or cascading more amplifiers, powered speakers or
subwoofers according to any AV installation requirements

Professional, Studio Grade Signal Conversion Technology-Includes the latest generation 32–bit

advanced Digital Analog Converter architecture to achieve excellent dynamic performance and
improved tolerance to clock jitter. Maintains the quality of the original audio signal with selectable
sampling rates up to 96 kHz

Durable and Reliable-PA−240Net is immune to failure. It includes layers of protection against

over−current, DC voltage at the outputs, high frequency, and over−heating with intelligent,
heat−sensitive fans for added protection

Flexible Control Options-Control locally via RS−232 serial commands or remotely, via embedded

web pages over Ethernet

Power Efficient-This super−efficient amplifier includes auto−standby for power saving and cost

reducing operation. No need to rely on default auto−standby settings. Adjust your noise floor
threshold based on exactly when your amplifier needs to go into sleep mode and when it needs to
wake up

Easy Installation-½ 19” size enables mounting in a 1U rack space with the recommended rack

adapter



TECHNICAL SPECIFICATIONS

Inputs

Outputs

Ports

Amplifier

2 Channels, on a Dante™ Net: On an RJ−45 connector

1 Balanced Stereo Audio: +4dBu/10kΩ, on a 5 pin terminal block

1 Balanced Stereo Audio: line level, on a 5−pin terminal block

1 Speaker: On a 4−pin large terminal block

1 Control via IP: on an RJ−45 connector

1 RS-232: on a 3−pin terminal block

Input Sensitivity: Full power @ 0.3V (–10dBV)

Output Power 2 x 120W @ 4Ω or 8Ω, 1 x 240W @ 70V or 100V

Class: D

Maximum Voltage Gain: 26dB SE / 32dB BTL

Dynamic Range: 119dB

Frequency Response: 20Hz to 20kHz @ +/−1dB

S/N Ratio: 80dB, 20Hz − 20kHz

Audio THD + Noise: THD+N (1kHz @ 1W) 0.003 %

User Interface

Power

Environmental
Conditions

Regulatory
Compliance
(Standards
Compliance)

Enclosure

Audio 2nd Harmonic: 0.08% @ 75W RMS @ 4Ω 6.67kHz

Controls Output volume attenuator, IP and RS−232

Source Universal mains operational voltage 85V AC – 265V AC (full power at 120V
– 230V)

Consumption 265VA

Total System Efficiency 90%

Operating Temperature: 0° to +40°C (32° to 104°F)

Storage Temperature: −40° to +70°C (−40° to 158°F)

Humidity: 10% to 90%, RHL non−condensing

Safety: CE, FCC

Environmental: RoHs, WEEE

Size: ½ 19” desktop

Type: Aluminum

Accessories

Product Dimension

Product Weight

Shipping Dimension

Shipping Weight

Cooling: Fan ventilation

Included: Power cord

21.46cm x 16.30cm x 4.36cm (8.45" x 6.42" x 1.72" ) W, D, H

1.1kg (2.3lbs) approx

40.50cm x 29.70cm x 9.00cm (15.94" x 11.69" x 3.54" ) W, D, H

1.7kg (3.6lbs) approx