2 9 0 0 - 3 0 0 4 5 7 QS
1
OPS-1 Quick Start Guide
This guide helps you install and use your product for the first time. For more
detailed information, go to to download the latest
http://bit.ly/k-prod-downloads
manual or scan the QR code on the left.
Step 1: Check what’s in the box
OPS-1 OPS Compliant HDMI to HDBT Range Extender
Step 2: Install the OPS-1
Switch off power before installing the O . display PS-1
Slide the OPS-1 into the receptacle on the back of an OPS-compatible display as if installing
a card module into a cage. Press it into place until snugly attached.
OPS Display
ETHERNET
SYSTEM
OPS-1
Step 3: Connect the inputs and outputs
Always switch off the power on each device before connecting it to your O . PS-1
ETHERNET
Network
SYSTEM
HDBT
Source
Always use Kramer high-performance cables for connecting AV equipment to the .OPS-1
OPS-1 Quick Start (P/N: 2900-300457QS REV 1)
P/N:
Rev:
Loading...