Kramer Electronics, Ltd.
USER MANUAL
Model:
102xl
2 Channel Audio Mixer
Contents
i
Contents
1
Introduction 1
2
Getting Started 1
2.1
Quick Start 1
3
Overview 3
4
Your 102xl 2 Channel Audio Mixer 4
5
Connecting the 102xl 2 Channel Audio Mixer 5
6
Technical Specifications 7
Figures
Figure 1: 102xl 2 Channel Audio Mixer 4
Figure 2: Connecting the 102xl 2 Channel Audio Mixer 6
Tables
Table 1: 102xl 2 Channel Audio Mixer Features 4
Table 2: Technical Specifications of the 102xl 2 Channel Audio Mixer 7
Introduction
1
1 Introduction
Welcome to Kramer Electronics (since 1981): a world of unique, creative and
affordable solutions to the infinite range of problems that confront the video,
audio and presentation professional on a daily basis. In recent years, we have
redesigned and upgraded most of our line, making the best even better! Our
500-plus different models now appear in 8 Groups1, which are clearly defined
by function.
Congratulations on purchasing your Kramer MultiTOOLS® 102xl 2 Channel
Audio Mixer, which is ideal for:
Live stage and studio audio mixing
Presentation systems and press conferences
The package includes the following items:
102xl 2 Channel Audio Mixer
Power adapter (12V DC Input)
This user manual2
2 Getting Started
We recommend that you:
Unpack the equipment carefully and save the original box and packaging
materials for possible future shipment
Review the contents of this user manual
Use Kramer high performance high resolution cables3
2.1 Quick Start
This quick start chart summarizes the basic setup and operation steps.
1 GROUP 1: Distribution Amplifiers; GROUP 2: Video and Audio Switchers, Matrix Switchers and Controllers; GROUP 3:
Video, Audio, VGA/XGA Processors; GROUP 4: Interfaces and Sync Processors; GROUP 5: Twisted Pair Interfaces;
GROUP 6: Accessories and Rack Adapters; GROUP 7: Scan Converters and Scalers; and GROUP 8: Cables and Connectors
2 Download up-to-date Kramer user manuals from the Internet at this URL: http://www.kramerelectronics.com
3 The complete list of Kramer cables is on our Web site at http://www.kramerelectronics.com
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Getting Started
2
Overview
3
3 Overview
The 102xl 2 Channel Audio Mixer is a high quality, low noise, 2-input mono
balanced audio standalone mixer that provides for 2 different levels on each
input - Mic level or line level as well as the selection of either a dynamic or
phantom microphone.
The 102xl includes:
Two XLR input connectors and one XLR output connector
A MASTER knob for adjusting the level of both input signals mixed into
the output, and two LEVEL knobs, for adjusting the levels of each input1
separately
A 12 VDC power socket, which is ideal for field use. The unit generates
broadcast voltage level ±12V and +48V internally from the single
+12 VDC input
Two input level select switches1 for selecting the balanced level (MIC or
LINE)
Two switches1 for applying 48V phantom power2
Achieving the best performance means:
Connecting only good quality connection cables, thus avoiding
interference, deterioration in signal quality due to poor matching, and
elevated noise levels (often associated with low quality cables)
Avoiding interference from neighboring electrical appliances that may
adversely influence signal quality and positioning your 102xl in a location
free from moisture and away from excessive sunlight and dust
Caution – No operator-serviceable parts inside unit.
Warning – Use only the Kramer Electronics input power
wall adapter that is provided with this unit3.
Warning – Disconnect power and unplug unit from wall
before installing or removing device or servicing unit.
1 Each corresponds to its respective input
2 This is for applications that require typical condenser microphones to be connected directly to the 102xl. To prevent
unnecessary damage, apply phantom power to the Mic only when required
3 For example: model number AD2512C, part number 2535-000251
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your 102xl 2 Channel Audio Mixer
4
4 Your 102xl 2 Channel Audio Mixer
Figure 1 and Table 1 define the 102xl 2 Channel Audio Mixer.
Figure 1: 102xl 2 Channel Audio Mixer
Table 1: 102xl 2 Channel Audio Mixer Features
# Feature Function
1 12V DC +12V DC connector for powering the unit
2 INPUT LEVEL SELECT
(LINE/MIC) Switches
Move to MIC to select microphone level input; move to LINE to
select line level input (1 and 2)
3 INPUT 2 XLR Female Connector Connects to the audio source 2
4 PHANTOM 48V (OFF/ON)
Switches
Move to ON to select a condenser microphone; move to OFF to
select dynamic microphone (1 and 2)
5 INPUT 1 XLR Female Connector Connects to the audio source 1
6 ON LED Lights when the unit is powered
7 OUTPUT XLR Male Connector Connects to the audio acceptor
8 INPUT Knobs Adjust the input levels of each channel (1 and 2)
9
LEVEL
MASTER Knob Adjusts the combined signals from both inputs mixed to the output
Connecting the 102xl 2 Channel Audio Mixer
5
5 Connecting the 102xl 2 Channel Audio Mixer
To connect up to two balanced audio sources to the 102xl 2 Channel Audio
Mixer unit, as the example in Figure 2 illustrates, do the following1:
1. Connect a balanced audio source (for example, a condenser microphone)
to the INPUT 1 XLR female connector.
Set the INPUT LEVEL SELECT IN 1 switch to MIC.
Set the PHANTOM 48V IN 1 switch to ON2.
2. Connect a balanced audio source to the INPUT 2 XLR female connector.
Set the INPUT LEVEL SELECT IN 2 switch to LINE.
Set the PHANTOM 48V IN 2 switch to OFF.
3. Connect the XLR male OUTPUT connector to a balanced audio acceptor
(for example, a power amplifier with speakers).
4. Connect the 12V DC power adapter to the power socket and connect the
adapter to the mains electricity.
5. Rotate the INPUT 1, INPUT 2 and MASTER LEVEL knobs to adjust the
audio level of input 1, input 2 and of both inputs mixed together3 to the
output, respectively.
For every unused input, be sure to rotate the LEVEL potentiometer fully
counter-clockwise (to the minimum level).
1 Switch OFF the power on each device before connecting it to your 102xl. After connecting your 102xl, switch on its power
and then switch on the power on each device.
2 When using a dynamic microphone, set the PHANTOM 48V switch to OFF
3 The MASTER LEVEL knob
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting the 102xl 2 Channel Audio Mixer
6
Figure 2: Connecting the 102xl 2 Channel Audio Mixer
Technical Specifications
7
6 Technical Specifications
Table 2: Technical Specifications1 of the 102xl 2 Channel Audio Mixer
INPUTS: Line/Mic balanced mono on female XLR connectors
OUTPUTS: 1 Line/Mic balanced mono on a male XLR connector
MAX. OUTPUT LEVEL: 18Vpp @absolute maximum gain
BANDWIDTH (-3dB): > 100kHz
S/N RATIO: Line: 91.5dB Mic: 62.5dB, 1kHz
CONTROLS: Line:<-48dB to +11.4dB, Mic: <-1.9dB to +62.5dB, minimum to absolute
gain
Phantom +48V selection for condenser microphone by 90 dipswitches2
Line/microphone input mode selection by 90 dipswitches2
COUPLING: Input: AC, Output: DC
AUDIO THD + NOISE: Line: 0.013%, Mic: 0.079%
AUDIO 2nd HARMONIC: Line: 0.002%, Mic: 0.01%
POWER SOURCE: 12 VDC, 112mA (DC)
DIMENSIONS: 10.68cm x 16.2cm x 4.2cm (4.2" x 6.38" x 1.65"), W, D, H
WEIGHT: 0.65 kg. (1.4 lbs.) approx.
ACCESSORIES: Power supply
OPTIONS: 19" rack adapters
1 Specifications are subject to change without notice
2 Individual control for each input
KRAMER: SIMPLE CREATIVE TECHNOLOGY
8
LIMITED WARRANTY
WHO IS PROTECTED?
WHAT IS COVERED AND WHAT IS NOT COVE RED
WHAT WE WILL PAY FOR AND WHAT WE WILL NOT PAY FOR
HOW YOU CAN GET WARRANTY SERVICE
LIMITATION OF I MPL IED WARRAN TIES
EXCLUSION OF DAMAGES
CAUTION!
Kramer Electronics (hereafter ) warrants this product free from defects in material and workmanship under the
following terms.
Kramer
HOW LONG IS THE WARRANTY
Labor and parts are warranted for seven years from the date of the first customer purchase.
Only the first purchase customer may enforce this warranty.
We will pay labor and material expenses for covered items. We will not pay for the following:
The liability of Kramer for any effective products is limited to the repair or replacement of the product at our option. Kramer shall
not be liable for:
This warranty gives you specific legal rights, and you may also have other rights, which vary from place to place.
All products returned to Kramer for service must have prior approval. This may be obtained from your dealer.
This equipment has been tested to determine compliance with the requirements of:
EN-50081: "Electromagnetic compatibility (EMC);
generic emission standard.
Residential, commercial and light industry"
EN-50082: "Electromagnetic compatibility (EMC) generic immunity standard.
Part 1: Residential, commercial and light industry environment".
CFR-47: FCC Rules and Regulations:
Part 15: “Radio frequency devices
Subpart B Unintentional radiators”
Except as below, this warranty covers all defects in material or workmanship in this product. The following are not covered
by the warranty:
1. Any product which is not distributed by Kramer, or which is not purchased from an authorized Kramer dealer. If you are
uncertain as to whether a dealer is authorized, please contact Kramer at one of the agents listed in the Web site
www.kramerelectronics.com.
2. Any product, on which the serial number has been defaced, modified or removed.
3. Damage, deterioration or malfunction resulting from:
i) Accident, misuse, abuse, neglect, fire, water, lightning or other acts of nature
ii) Product modification, or failure to follow instructions supplied with the product
iii) Repair or attempted repair by anyone not authorized by Kramer
iv) Any shipment of the product (claims must be presented to the carrier)
v) Removal or installation of the product
vi) Any other cause, which does not relate to a product defect
vii) Cartons, equipment enclosures, cables or accessories used in conjunction with the product
1. Removal or installations charges.
2. Costs of initial technical adjustments (set-up), including adjustment of user controls or programming. These costs are the
responsibility of the Kramer dealer from whom the product was purchased.
3. Shipping charges.
1. To obtain service on you product, you must take or ship it prepaid to any authorized Kramer service center.
2. Whenever warranty service is required, the original dated invoice (or a copy) must be presented as proof of warranty
coverage, and should be included in any shipment of the product. Please also include in any mailing a contact name,
company, address, and a description of the problem(s).
3. For the name of the nearest Kramer authorized service center, consult your authorized dealer.
All implied warranties, including warranties of merchantability and fitness for a particular purpose, are limited in duration to
the length of this warranty.
1. Damage to other property caused by defects in this product, damages based upon inconvenience, loss of use of the product, loss
of time, commercial loss; or:
2. Any other damages, whether incidental, consequential or otherwise. Some countries may not allow limitations on how long an
implied warranty lasts and/or do not allow the exclusion or limitation of incidental or consequential damages, so the above
limitations and exclusions may not apply to you.
Servicing the machines can only be done by an authorized Kramer technician. Any user who makes changes or
modifications to the unit without the expressed approval of the manufacturer will void user authority to operate the
equipment.
Use the supplied DC power supply to feed power to the machine.
Please use recommended interconnection cables to connect the machine to other components.
NOTE:
Part 1:
Kramer Electronics, Ltd.
Web site: www.kramerelectronics.com
E-mail: info@kramerel.com
P/N: 2900-000313 REV 1
For the latest information on our products and a list of Kramer
distributors, visit our Web site: www.kramerelectronics.com,
where updates to this user manual may be found.
We welcome your questions, comments and feedback.
Caution
Safety Warning:
Disconnect the unit from the power supply before
opening/servicing.
Loading...