Page 1
KT-1010SC, KT-1010SCRB Quick Start
P/N:
2900- 301430QS
Rev:
7
Scan for full manual
KT-1010SC / KT-1010SCRB Quick Start Guide
This guide helps you install and use your KT-1010SC / KT-1010SCRB for the first time.
Go to www.kramerav.com/downloads/KT-1010SC or www.kramerav.com/downloads/KT-1010SCRB to
download the latest user manual and check if firmware upgrades are available.
Step 1: Check what’s in the box
KT-1010SC KronoMeet Touch
Panel or KT-1010SCRB
KronoMeet Touch Panel
(Reduced Bandwidth)
On-wall mount bracket kit
Quick start guide
2 LED side bars
12V AC/DC power adapter
Panel mount
bracket
Installation screws
Step 2: Get to know your KT -1010SC / KT-1010SCRB
#
Feature
Function
1
Volume Buttons (+/-)
Press to increase/decrease KT-1010SC speaker volume.
2
Up/Down (/) Keys
Press to scroll through the menu options.
3
Exit Button
Press to exit the menu.
4
SD Card Slot and Cover
Add an external memory card.
5
Power LED
Power on indication. Orange when loading, then turns green.
6
2 LED Side-Bar Module Slots
Connect to LED side bars to indicate the room status.
7
2 Speakers
To output the sound.
8
4 VESA Mounting Screw Holes (75x75mm)
Connect to a VESA kit to mount on a wall.
9
12V DC Input with Cable Security Lock
Connect to the AC/DC adapter and to the mains.
10
Add-on USB Module Slot
For future use.
11
Ethernet PoE RJ-45 Connector
Connect to a PC via a LAN.
12
USB Type A Port
Connect to USB peripherals (such as a keyboard, printer, etc.).
13
Micro USB Port
Connect to USB peripherals (such as a keyboard, printer, etc.).
14
2 Control I/O Ports
For future use.
15
Power ON/OFF Switch
Press to turn power on or off.
Page 2
Step 3: Mount KT-1010SC / KT-1010SCRB
Before mounting KT-1010SC on a wall, connect the two LED side bars to the LED module slots on both sides of the device
and tighten to the rear side with the 2 screws (included with the side bars).
This section describes KT-1010SC but applies also to
KT-1010SCRB.
To mount KT-1010SC on a wall using the VESA
kit:
1. Unscrew the 2 security screws and separate the
wall mounting brackets. Keep screws and rubber
washers for later.
2. Secure the on-wall mount to the wall using 2
installation screws and washers (use the built-in
level for levelling).
3. Attach the panel mount bracket to the VESA
mounting holes on the rear side of the
KT-1010SC (safety screw openings on top).
4. Slide the panel mount bracket to the on-wall
bracket already mounted on the wall.
5. Replace security screws with rubber washers.
• Ensure that the environment (e.g., maximum ambient temperature & air flow) is compatible for the device.
• Avoid uneven mechanical loading.
• Appropriate consideration of equipment nameplate ratings should be used for avoiding overloading of the circuits.
• Reliable earthing of rack-mounted equipment should be maintained.
• Maximum mounting height for the device is 2 meters.
Step 4: Connect power
Connect the Ethernet port to a PoE Ethernet port, using a PoE-compliant Ethernet cable.
Alternatively, or in addition to PoE powering, connect the power adapter to the 12V AC/DC power socket and to the main
electricity.
Safety Instructions (See www.kramerav.com for updated safety information).
Caution:
• There are no operator serviceable parts inside the unit.
Warning:
• Use only the power cord that is supplied with the unit.
• Disconnect the power and unplug the unit from the wall before installing.
Step 5: Operate KT-1010SC / KT -1010SCRB
To operate KT-1010SC for the first time:
1. Turn the power switch on the rear of the touch panel to ON.
Wait for Kramer KronoMeet log-in page to load.
2. Press Exit (3) on the rear of the panel to exit the KronoMeet app.
3. Enter the default password (Kramer) and proceed to the Home Screen.
4. Make sure the device is connected to the Internet.
If the device is connected via Wi-Fi:
Press Exit (3) and enter the default password (Kramer).
Click Home Page>Settings>Wi-Fi and choose your SSID
Network.
Reboot your device.
KramerAppUpdate automatically updates Kramer apps.
Tap Home-Page>App Icon>KramerAppUpdate to view installed and
available app versions and to change the Server Check Interval.
To Launch the KronoMeet App and activate the KronoMeet panel:
1. Enter your KronoMeet Activation Code for this meeting space from the
KronoMeet dashboard.
2. Click Activate on the panel.
Loading...