Kramer KT-10 User Manual

USER MANUAL

MODEL:

KT-10

Touch Panel

P/N: 2900-300607 Rev 5

www.kramerAV.com

Contents

1 Introduction 1
2 Getting Started 2

2.1 Achieving the Best Performance 2

2.2 Safety Instruc ti o ns 2

2.3 Recycling Kramer Products 3

3 Overview 4

3.1 Defining the KT-10 Touch Panel 4

4 Mounting the KT-10 6

4.1 Placing the KT-10 on the table 6

4.2 Mounting on the Wall 7

5 Connecting the KT-10 9
6 Setting up the KT-10 10

6.1 KT-10 Recommended Settings 10

6.2 Other Setting Options 10

6.3 Functions and Limitations 10

7 KT-10 Firmware Upgrade 11
8 K-Touch App Upgrade 14
9 Technical Specifications 15

Figures

Figure 1: KT-10 Touch Panel Rear 4
Figure 2: KT-10 Touch Panel Front 5
Figure 3: Attaching the Tabletop Mount to the KT-10 Touch Panel 6
Figure 4: Mounting the Touch Panel on the wall 7
Figure 5: Connecting the KT-10 Touch Panel 9
Figure 6: Connecting the KT-10 Touch Panel with PSE-1 9

KT-10 – Contents i

1 Introduction

Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been
providing a world of unique, creative, and affordable solutions to the vast range
of problems that confront video, audio, presentation, and broadcasting
professionals on a daily basis. In recent years, we have redesigned and
upgraded most of our line, making the best even better!

Our 1,000-plus different models now appear in 14 groups that are clearly defined
by function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and
Routers; GROUP 3: Control Systems; GROUP 4: Format/Standards Converters;
GROUP 5: Range Extenders and Repeaters; GROUP 6: Specialty AV Products;
GROUP 7: Scan Converters and Scalers; GROUP 8: Cables and Connectors;
GROUP 9: Room Connectivity; GROUP 10: Accessories and Rack Adapters;
GROUP 11: Sierra Video Products; GROUP 12: Digital Signage; GROUP 13:
Audio; and GROUP 14: Collaboration.

Congratulations on purchasing your Kramer KT-10 Touch Panel, which is ideal
for the following typical applications:

• Control user interface in meeting and conference rooms, boardrooms, and

auditoriums

• Presentation of room scheduling

KT-10 – Introduction 1

available (where appropriate).

Caution:

There are no operator serviceable parts inside the unit

provided with the unit

before installing

2 Getting Started

We recommend that you:

• Unpack the equipment carefully and save the original box and

packaging materials for possible future shipment

• Review the contents of this user manual

Go to www.kramerav.com/downloads/KT-10 to check for up-to-date user
manuals, application programs, and to check if firmware upgrades are

2.1 Achieving the Best Performance

To achieve the best performance:

• Use only good quality connection cables (we recommend Kramer high-

performance, high-resolution cables) to avoid interference, deterioration
in signal quality due to poor matching, and elevated noise levels (often
associated with low quality cables)

• Do not secure the cables in tight bundles or roll the slack into tight coils

• Avoid interference from neighbouring electrical appliances that may

adversely influence signal quality

• Position your KT-10 away from moisture, excessive sunlight and dust

This equipment is to be used only inside a building. It may only be
connected to other equipment that is installed inside a building.

2.2 Safety Instructions

Warning:

Warning:

Use only the Kramer Electronics power supply that is

Disconnect the power and unplug the unit from the wall

2 KT-10 – Getting Started

2.3 Recycling Kramer Products

The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC
aims to reduce the amount of WEEE sent for disposal to landfill or incineration
by requiring it to be collected and recycled. To comply with the WEEE Directive,
Kramer Electronics has made arrangements with the European Advanced
Recycling Network (EARN) and will cover any costs of treatment, recycling and
recovery of waste Kramer Electronics branded equipment on arrival at the EARN
facility. For details of Kramer’s recycling arrangements in your particular country
go to our recycling pages at www.kramerav.com/support/recycling/

.

KT-10 – Getting Started 3

3 Overview

The KT-10 is a portable 10" IPS multi−touch Touch Panel with a 1280x800
resolution. This Android−based Touch Panel can be tabletop− and on−wall−

mounted and is VESA compliant.

The device supports Power over Ethernet (PoE) and comes with an Ethernet
cable, an additional power supply and Wi−Fi options. The KT-10 Touch Panel is
ideal for any 24/7 commercial AV or control application and features a

user−friendly, fully customizable graphical user interface configured by Kramer

software.

3.1 Defining the KT-10 Touch Panel

This section defines the KT-10.

Figure 1: KT-10 Touch Panel Rear

4 KT-10 – Overview

#

Feature

Function

1

+/- Volume Setup Key

Set the volume level

2

Up/Down Key

Scroll through the menu options

3

Exit Key

Exit the menu

4

SD Card Slot with Cover

Add external memory

5

Power LED

Indicates power on

6

Add-on USB Module Slot (x3)

For future use

7

Speakers

To output the sound

8

LAN RJ-45 Port

Ethernet PoE port

keyboard, printer, and so on)

11

Control I/O Port (x2)

For future use

12

12V DC Power Connector

Connect to the power supply

13

Power ON/OFF Switch

Turn power on or off

14

Headphone on a 3.5mm Mini Jack

Connect to a headphone

16

Camera

For video conferen ci ng

17

Microphone

For video conferencing or audio recording

9 USB Port (Type A) Connect to USB peripheral s (su c h as

10 Micro USB Port Connect to USB peripheral s (su c h as

15 VESA Mounting Screw Holes (x4) Use to connect to the tabletop mount to

keyboard, printer, and so on)

place on the table or mount on the wall, or
connect to connect the on-wall bracket to
mount the KT-10 on the wall

Figure 2: KT-10 Touch Panel Front

# Feature Function

KT-10 – Overview 5

4 Mounting the KT-10

You can either place the KT-10 on a table or mount it on the wall.

4.1 Placing the KT-10 on the table

To place the KT-10 on the table, attach the tabletop mount to the KT-10 via the
four VESA screws located on its rear side and the four supplied screws (see

Figure 3

).

Figure 3: Attaching the Tabletop Mount to the KT-10 Touch Panel

6 KT-10 – Mounting the KT-10

4.2 Mounting on the Wall

You can attach the KT-10 Touch Panel to the wall either by hanging the tabletop
mount on the wall after attaching it to the KT-10 (see Figure 4
VESA kit.

Figure 4: Mounting the Touch Panel on the wall

The VESA kit includes two pieces: the on-wall mount bracket and the panel
mount bracket.

) or by using the

To mount the KT-10 using the VESA kit:
To mount the unit:

1. Secure the on-wall mount
bracket to the wall using the
installation screws.

KT-10 – Mounting the KT-10 7

side of the KT-10.

already fixed to the wall).

2. Attach the panel mount bracket to the VESA mounting holes on the rear

3. Slide the panel mount bracket onto the on-wall mount bracket (that is

8 KT-10 – Mounting the KT-10

, connect its power and then

switch on the power to each device.

5 Connecting the KT-10

Always switch off the power to each device before connecting it to
your KT-10. After connecting your KT-10

To connect the KT-10, as illustrated in the example in Figure 5:

• Connect the LAN R J-45 connector to your local area network

• Optionally, connect via Wi-Fi if no wired Ethernet connection is

available, or as a fall-back for resiliency purposes

Figure 5: Connecting the KT-10 Touch Panel

• Optionally, if there is no PoE-enabled network, the Kramer PSE-1 10G

PoE injector can be connected for PoE support (see Figure 6

Figure 6: Connecting the KT-10 Touch Panel with PSE-1

KT-10 – Connecting the KT-10 9

)

6 Setting up the KT-10

This section describes the KT-10 settings and limitations.

6.1 KT-10 Recommended Settings

When using KT-10 we recommend that you:

• Hide the bars: select Settings > Display and check Hide Status Bar.

• Lock the physical buttons: select Settings > Physical Button

Manager and uncheck Enable Physical Button.

• Wi-Fi Service Monitoring: when the Wi-Fi connection is enabled,

select Settings > More > WiFI Watch Service Monitor.

• Set the NTP: select Settings > Date & Time > NTP Server. Otherwise

set the time, date and time zone manually.

6.2 Other Setting Options

• Sleep mode time out settings: you can disable sleep mode. Select

Settings > Display > Sleep and choose Never time out.

• Show barcode for production: select Settings > About tablet >

Status > Ethernet MAC > Tap t o show barcode for product i on.

6.3 Functions and Limitations

Note KT-10 functions and limitations:

• Auto time update is not supported; you need to set it manually.

• Wi-Fi – when activating Wi-Fi by setting it on and connecting to an

available Wi-Fi network, KT-10 works either concurrently with a wired
Ethernet active connection or as a wireless-only connection with no
connected wired Ethernet.

• PoE and PSU – when both are connected, PoE takes precedence and

PSU is used as a backup. If PoE is unplugged, KT-10 keeps working
smoothly with no need for rebooting.

10 KT-10 – Settin g up th e K T-10

device continues to operate normally.

7 KT-10 Firmware Upgrade

The KT-10 does not support downgrading firmware to a lower version or
loading the same firmware version as is already installed on the device.

Such changes result in an Android error message, displayed when you
reboot the device to complete the firmware upgrade procedure. This
message disappears after a few moments and the device resumes the
boot sequence with the previously installed firmware.

When the device loads for the first time following a failed firmware
upgrade, the Firmware Upgrade Failed message is displayed and the

To upgrade KT-10 to a new firmware version:

1. Check for an up-to-date KT-10 firmware file (update.zip) on our Web site
at: www.kramerav.com/downloads/KT-10.

2. Download the firmware file to a flash drive (USB memory stick).

Do not unzip the file; copy the update.zip file as is.

3. Connect the USB memory stick to the USB port on the KT-10.

4. Open ES FILE EXPLORER and select USB_STORAGE. Make sure that
update.zip appears onscreen.

5. Open the touch panel home page.

KT-10 – KT-10 Firmware Upgrade 11

6. Go to Settings > About tablet > System update.
The following message appears:

7. Click Check now.
The system reads the update.zip file from the connected flash drive.

8. Click Install and wait for the upgrade procedure to complete and for the
system to reboot.

12 KT-10 – KT-10 Firmware Upgrade

9. When complete, the following message appears:

10. Click No or Yes as required.

11. Check that the build number has changed in Settings > About tablet.

KT-10 – KT-10 Firmware Upgrade 13

8 K-Touch App Upgrade

KT-10 is delivered with the K-Touch app already installed.

To upgrade to a new software version:

1. Check for up-to-date K-Touch app APK file on our Web site at:

k.kramerav.com/support/download.asp?f=52037

2. Download the application file to a flash drive (USB memory stick).

3. Connect the USB memory stick to the USB port on the KT-10.

4. Open Explore on the touch panel home page.

5. Select USB Storage and select the K-Touch (A PK) file.

6. Click Install and wait for the software to complete the installation and
upgrade process.

Following a K-Touch app upgrade we recommend that K-Touch is set as
follows:

.

• Set the K-Touch configured program to operate in full screen mode for

hiding the touch panel bars.

• Work in the secure mode – in K-Touch settings, select Lock Settings

and click yes. Type a 4-digit password to be entered on-screen when
opening the application menu option.

14 KT-10 – K-Touch App Upgrade

PORTS:

1 USB 2.0 host type A

1 12 VDC input connector

SPEAKERS:

2x1.5W

MICROPHONE

1 Omni-directional, -40 ±3 dB Sensitivity

CPU PERFORMANCE:

Quad Core, 1.6GHz, GPU, 2GB RAM, 8GB Flash

OS SOFTWARE

Android 4.4.4 KitKat

EXTERNAL MEMOR Y OPTION:

SD card (SDHC class 10 compatible) slot (with cover)

MULTI TOUCH:

5 points

DISPLAY:

10.1” IPS LCD, 16:10 aspect ratio, 1280x800 RGB pixels, back­light, 350 nits brightness, 500:1 contrast ratio

VIDEO FORMAT:

MKV, TS, FLV, AVI, VOB, MPG, DAT, ASF, RM, MOV, 3GP, MP4
AUDIO FORMAT:

MP2, WMA, WAV, AAC, OGG and ASF

IMAGE FORMAT:

JPG, BMP and GIF

ETHERNET PORT

10/100Mbps POE LAN

Light off: link OFF)

WIRELESS COMMUNICATION:

Wi-Fi IEEE802.11b/g/n, Bluetooth BT4.0

CAMERA:

Front: 2M pixels

CLOCK BATTERY:

Lithium-ion non-chargeable coin battery (for RTC)

PoE standards), power supply unit

POWER CONSUMPTION:

12V, 1.4A

OPERATING TEMPERATURE:

0° to +40°C (32° to 104°F)

STORAGE TEMPERATURE:

-10° to +55°C (14° to 131°F)

HUMIDITY:

10% to 90%, RHL non-condensing

CASE DESIGN:

Black body and cover

tabletop mount base: 13. 6cm x 11cm (5.4" x 4.3" ), W , D

WEIGHT:

Touch panel: 0.63kg (1.4lbs) approx.

Wall bracket: 0.3kg (0.66lbs) approx.

INCLUDED ACCESSORIES:

Power supply unit adapter (12V, 2.0A AC/DC), tabletop mount unit,
on-wall mount bracket, pan el -mount bracket, installation screws

CERTIFICATIONS:

CE, FCC, ROHS

For the most updated resolution list, go to our Web site at www.kramerav.com/

9 Technical Specifications

1 micro USB 2.0
3 add-on USB 2.0 module slots (for future use)
2 control I/O ports (for future use)
1 LAN on an RJ-45 con nector
1 headphone port on a 3.5mm mini jack

and WMV

LED (green: Link ON and Idle; blinking green: Link ON with activity;

CONTROLS: Control buttons: volum e (+/-) key, up/down key, exit button, power

POWER INPUTS: Power over Ethernet (complies with IE EE 802. 3af and IEEE802.3at

DIMENSIONS: Touch panel: 25.2cm x 2 . 4cm x 17.8cm (9.9" x 0.94" x 7"), W, D, H

MOUNTING OPTIONS: Panel-back 4 VESA-compatible screw holes
Specifications are subject to change without notice

KT-10 – Technical Specifications 15

switch (ON/OFF) and LED (green: ON; red: SW boot-up; light off:
OFF)

Touch panel with tabletop mount: 1.17kg (2.6lbs) approx.

P/N:

2900-300607

Rev:

5

SAFETY WARNING

Disconnect the unit from the power supply before opening and servicing

For the latest information on our products and a list of Kramer distributors,
visit our Web site to find updates to this user manual.

We welcome your questions, comments, and feedback.

www.kramerAV.com
[e-mail]