
The Kramer Dual USB Charger
Connect to grounding wi re
Power Supply 2-pin
Connector
0° to +40°C (32° t o 104°F )
10% to 90%, RHL non-condensing
Go to our Web site at www.kramerav.com
Congratulations on purchasing your Kramer dual USB charger with two USB connectors for charging
devices (such as iOS and Andr oid devices) that is available as: W-2UC, a dual insert and as
WP-2UC, a standard, one gang US size insert.
Defining the Dual USB Charger
Figure 1 defines the front panels of the W-2UC and WP-2UC and Figure 2 defines their rear panel.
Mounting the W-2UC
To mount a Kramer insert or connector module:
1. Place the Kramer insert over the opening.
2. Insert the four screws (two on each side) to fix the Kramer insert in place, and tig hten the m .
Mounting the WP-2UC
The WP-2UC standard size, one gang US inser t can be fitted into a standard US market-available
design frame.
Grounding the Dual USB Charger
The grounding screw is used to eart h the chass is of the unit to the ground of the building to help
prevent static electricity from impacting on th e performance of the unit .
1 M3X6 screw
Figure 3: Grounding Connection Components
Technical Specifications
PORTS: 2 USB connectors
POWER CONSUMPTION: 5V DC, 4A
Figure 1: WP-2UC and W-2UC Front Panels
1 Power LED Lights when the unit
receives power
2 Top USB Connector Connect to a device for
3 Lower USB Connector Connect to a device for
STORAGE TEMPERATURE: -40° to +70°C (-40° to 158°F)
INCLUDED ACCESSORIES: Power supply
WEIGHT: 0.14kg (0.31lbs) approx.
Specifications are subject to change without notice
Terminal Block
Connect GND to GND
Figure 2: WP-2UC and W-2UC Rear Panel

!
SAFETY WARNING
Disconnect the unit from the power
supply before opening and servicing
KRAMER ELECTRONICS LTD.
Installation
MODELS:
We welcome your questions, comments, and feedback.
Web site: www.kramerav.com
E-mail: info@kramerel.com
W-2UC Dual Insert
Dual USB Charger
WP-2UC
Dual USB Charger
For the latest information on our products and a list of Kramer
distributors, visit our Web site where updates to these
installation instructions may be found.
Wall Plate Device
P/N: 2900-300690 Rev 3