Kramer K-CamHD Quick Start

K-CamHD Quick Start

P/N:

2900- 301529QS

Rev:

2

Scan for full manual

K-CamHD Quick Start Guide

This guide helps you install and use your K-CamHD for the first time.
Go to www.kramerav.com/downloads/K-CamHD to download the latest user manual and check if firmware

upgrades are available.

Step 1: Check what’s in the box

K-CamHD PTZ Camera

Lens cover

1 USB 3.0 cable

Remote control transmitter with batteries

Wall bracket

1 Quick start guide

Power adapter and cord

Screws set

Step 2: Get to know your K-CamHD

# Feature

Function

1

Camera

High quality Camera.

2

Tilting Mechanism

Can be set to any of 255 preset positions.

3

STANDBY LED

Lights green when the camera is in
standby mode.

4

POWER LED

Lights blue when the power is on.

5

USB 3 Type B Port

Connect to a PC.

6

LINE IN

Connect to a microphone.

7

RS-232 8­pin DIN
Connectors

IN

Connect to a device with an RS-232 port
(for example, a system controller).

8

OUT

Connect to a device with an RS-232 port
(for example, a camera).

9

12V DC Power
Connector

Press and hold to toggle the
locking/release of the front panel buttons.
When storing or recalling presets, press to
store or recall the preset.

Step 3: Mount K-CamHD

You can mount K-CamHD on the wall, the ceiling or place it on a tabletop. The built-in gravity sensor automatically corrects the image orientation.

• Ensure that the environment (e.g., maximum ambient temperature, humidity & air flow) is compatible for the device.

• Avoid exposing the product to direct sunlight or any other heat source.

• Keep away from children – product includes small accessories and components.

• Avoid uneven mechanical loading.

• Do not insert any sharp objects into the product.

• Avoid dropping or hitting the product to avoid damaging the product.

• For maintenance, call tech support.

To attach K-CamHD onto a wall:

1. Find the correct location on the wall.

2. In the desired location, mark the hole locations, then
drill 4 holes 82mm and 60mm apart (using a 6mm
drill-bit) to fit the 4 holes of the wall-mounting bracket.

3. Insert the four expansion-plugs into the holes.

4. Attach the wall bracket to the wall, using the four wall­bracket screws.

5. Attach the device to the wall bracket by fitting the
mortise (on the bracket) into the tenon (on the
camera).

6. Fix the camera by screwing (A) Nickel screw to the
center and (B) then tighten with 3 black screws.

Note that you can also attach the device upside
down, from under the bracket.

Step 4: Connect inputs and outputs

Always switch OFF the power on each device before connecting it to your K-CamHD.

Control K-CamHD via the IR Remote Controller.

#

Key

Function

Shortcut Keys
*+＃+1: OSD default (English)
*+＃+3: OSD default (Chinese)
*+＃+6: Quickly recover the default
*+＃+8: View the camera version
*+＃+9: Quickly set up inversion

*+＃+MANUAL: Restore

default IP address

1

Power

Press once to enter standby mode. Press again to enter normal
operation mode.

2

Number (0 to 9)

Configure or edit a preset

3 * Use together with other keys for various functions.

4

PRESET

Press PRESET + a numerical key (0 to 9) to save the current
configuration to that preset number.

5

HOME

Press to return K-CamHD to its default position.
When in the OSD, press to enter a submenu or confirm menu.

6

Return

Return to previous item on the menu.

7

ZOOM

SLOW

Press for slow zoom in (+) or out (-).

FAST

Press for quick zoom in (+) or out (-).

8

L/R
Set

STD (1)

Press L/R + STD (1) keys to set Pan-Tilt to same direction as L/R
setting.

REV (2)

Press L/R + REV (2) keys to set Pan-Tilt to the direction opposite to
the L/R setting.

9

FOCUS

AUTO Press to automatically set the focus to the center of the
image.

MAN
UAL

Press to enter manual focus mode. Then press FAR or
NEAR.

FAR

When in MANUAL mode, press to focus on a far object

NEA
R

When in MANUAL mode, press to focus on a near object.

10

CAMERA
SELECT

Select the camera to configure and control (1 to 4).
11 # Use together with other keys for various functions.

12

IR RC

Press * + # + (F1 to F4) to assign a camera address to the remote.
For example, point the remote to a camera, press *+#+F1. The
remote assigns CAMERA SELECT 1 key to this camera. To use the
remote to control camera 1 press the CAMERA SELECT 1 key.
Press F4 to freeze the image.

13

RESET

Press RESET+ a key number (0 to 9) to delete a preset
configuration. Press *+#+RESET to delete all preset configurations.

14

PTZ Control

Control camera panning and tilting using arrow keys (left, right, up,
and down).

15

MENU

Enter/exit OSD menu.

16

BACKLIGHT

Press to turn backlight compensation on or off.
Available when exposure mode is set to Auto (via the OSD menu).

17

P/T RST

Press to self-check preset Pan/Tilt on camera.