Koss BT0001 User Manual

BT115i
Select “Koss BT115i” on transmitting device to pair
Koss
BT115i
Bluetooth Paired
When the indicator light flashes blue once every 5 seconds, the device is paired with Bluetooth.
1flash/ 5s
Single Press: Play / Pause /
Answer / Terminate call
Long Press:
Power on / Power off
Single Press: Incremental volume increase
Long press: Next track
Single Press: Incremental volume decrease
Long Press: Previous track
Bluetooth Headset Model: BT115i Input: 5V ,
50mA or Powered by
(
100mAh) Li-ion Polymer Battery
3.7V,
FCC ID: L76-BT0001 IC: 10021A-BT0001 S/N: BT0000001
KOSS CORPORATION
Made in China
Caution:
Use the product in the environment with the temperature Between-10 and 45; Otherwise, it may damage your phone. It can be operated under 2000m. For the following equipment: Product Name: Bluetooth Headset Brand Name: KOSS Model: BT115i Koss Corporation hereby declares that this [Name:Bluetooth Headset, Model: BT115i] is in compliance with the essential requirements and other relevant provisions or directive 2014/53/EU.
Bluetooth
Support Standard: Frequency Range: Max.RF Output Power: Type of Modulation: Data Rate: Quantity of Channels
802.15.4 2402-2480MHz
-2.22dBm (EIRP) GFSKπ/4 DQPSK8DPSK 1Mbps, 2Mbps, 3Mbps 79
Lithium ion Battery:
Model: 500829, 3.7V, 100mAh DongGuan Golden CEL Battery Co., Ltd Add: No.11, Yinhu Industrial Park, JiaoYiTang Management Zone, TangXia, DongGuan, GuangDong, China
FCC RF Exposure Warning
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
ISED RF Exposure Warning
This radio transmitter (ISED certification number: 10021A-BT0001) has been approved by Industry Canada to operate with the antenna types listed with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.
Le présent émetteur radio (ISED certification number: 10021A-BT0001) a été approuvé par Industrie Canada pour fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain admissible maximal. Les types d'antenne non inclus dans cette liste, et dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de l'émetteur.
Loading...