MPR524
ITEM NO. __________________________________________________
PROJECT __________________________________________________
LOCATION ________________________________________________
DATE _______________________QTY. __________________________
MPR SERIES
Pass-Thru Refrigerators
MODELS
❑
MPR242
❑ MPR524
❑ MPR806
NOTE:
• CEC certification applies to models with full solid doors only.
• Models with glass doors on both sides are not UL EPH classified
to NSF 7.
FEATURES
STANDARD
ELECTRONIC CONTROL
• Increases efficiency, reliability
and convenience
• Allows user to easily monitor and
adjust defrost functions from the
panel interface on the front of
the merchandiser
• Decreases service time and calls
• Eliminates cabinet thermostat,
defrost timer and digital thermometer or other temperature
indicator
CONSTRUCTION
• Exterior front, sides and doors are
stainless steel
• Exterior top and bottom are galvanized steel
• All exterior joints and seams fold in
without lap joints
• Interior liner and door panel are
stainless steel
• 2" foamed-in-place polyurethane
insulated walls
• 4" diameter casters (4 on one- and
two-section models, 6 on threesection model)
• Three heavy-duty epoxy-coated
shelves per section
• Interior LED light activated by
switches for each door
DOORS
• Available with lefthand or righthand
door swing
• Heavy-duty pivot hinges
• Centered key locks
• Horizontal handles
• Self-adjusting magnetic gaskets
REFRIGERATION
• Top mounted, self-contained refrigeration system
• Refrigerant: R-134a
• Automatic defrost
• Automatic energy efficient hot gas
condensate evaporator
• Refrigerant controlled by thermostatic expansion valve
• Minimum 4" clearance required on
top, rear and sides of cabinet
• Temperature range: 34° to 41°F
(1° to 5°C)
WARRANTY
• Standard limited three year
parts and labor
• Additional two year coverage
on compressor part
OPTIONS
❑ Extra epoxy-coated shelves
❑ Extra stainless steel shelves
❑ Full door pan slides
❑ Half door pan slides
❑ Full glass doors
❑ Half glass doors
❑ Half solid doors
❑ Legs in lieu of casters
908 Highway 15 North • New Albany, MS 38652
PHONE: 800-647-1284 or 662-534-9061 • FAX: 800-232-3966 or 662-534-6049 • www.master-bilt.com
TECHNICAL SPECIFICATIONS
MPR SERIES
PASS-THRU REFRIGERATORS
DIMENSIONS
(in.)
MODEL
MPR242 27
MPR524 55 381/4811/21397 972 2070 115 10.7 1/2 4 6 241/2L x 28D 55.7 105.3
MPR806 821/2381/4811/22096 972 2070 115 10.4 3/4 6 9 241/2L x 28D 85.8 153.4
*Height includes casters. With optional 6" legs overall height is 823/4"
L D H* L D H*
1
/2381/4811/2699 972 2070 115 8.6 1/3 2 3 23L x 28D 25.6 55.2
MPR242
PLAN VIEW
DIMENSIONS
(mm)
MPR524
PLAN VIEW
VOLTS AMPS
UNIT
NO. OF
H.P.
DOORS
SHELVES
MPR806
PLAN VIEW
NO. OF
STANDARD
SHELF SIZE
(in inches)
CAP.
SHIP
CU.
CU.
FT.
FT.
SIDE VIEW
(ALL)
SHIP
WT.
LB/KG
470/214
758/345
921/419
LISTINGS HOOKUP
Via plug in, 10 foot long flexible three wire
14/3 cord with molded plug.
NOTE:
• CEC certification applies to models with
full solid doors only.
• Models with glass doors on both sides are
not UL EPH classified to NSF 7.
NEMA 5-15P
BID SPECIFICATIONS
Item no. MPR_______________
Provide____________( ) Pass-Thru
Refrigerator(s), Master-Bilt model no.
MPR________.
Pass-thru refrigerator will be equipped
with an electronically controlled monitoring system and will feature stainless steel
exterior front, sides and doors. The exterior
top and bottom will be galvanized steel
while the interior liner and door panel will
be stainless steel. Also standard will be an
NOTE: Cabinet designed for optimum performance in air-conditioned area at 75°F ambient and 55% relative humidity.
All specifications subject to change without notice.
908 Highway 15 North • New Albany, MS 38652
PHONE: 800-647-1284 or 662-534-9061 • FAX: 800-232-3966 or 662-534-6049 • www.master-bilt.com
interior LED light activated by switches for
each door as well as a digital thermometer.
Doors will feature heavy-duty pivot hing-
es and centered key locks.
The refrigeration system will be top
mounted and self-contained. The refrigerant
will be R-134a and the temperature range
will be 34° to 41°F (1° to 5°C).
The refrigeration system will also feature
automatic defrost and an automatic energy
efficient hot gas condensate evaporator. Re-
frigerant controlled by thermostatic expansion valve.
Pass-thru to have standard limited three
year parts and labor with additional two
year coverage on compressor part.
Pass-thru to be UL and C-UL listed and
UL EPH classified (except for models with
glass doors on both sides). California Energy Code certification will apply to models
with full solid doors.
©2013 Master-Bilt Products, an unincorporated division of Standex International Corporation. All rights reserved. Printed in U.S.A.
1325-1/12-web