Kool Star HP6ALX User Manual

ITEM NO. ______________________________________________________

PROJECT ______________________________________________________

LOCATION _____________________________________________________

DATE _________________________ QTY. ___________________________

HP6A-LX SERIES

Combination
Heater/Proofing Cabinet,
Non-insulated

MODEL

❑

HP6A-LX

HP6A-LX

FEATURES

CONSTRUCTION

• Multi-purpose design provides
heat for holding as well as heat
and humidity for proofing. Also
serves as a mobile heated trans­port cabinet.

• 14 gauge aluminum body and 14
gauge galvanized caster base

• Removable, dual purpose ther­mostatically controlled hold­ing/proofing unit with external
controls and 12 hour timer for
proofing mode

• Can be used with or without
water

• Condensation drip trough,
removable for cleaning

• Adjustable damper

• Removable louvered back
mounted air tunnel for even
heat distribution

• Five-inch swivel plate casters
with modulus wheels (two with
brakes)

DOOR

• 270° door swing

• Hinged right

• Field reversible

• Positive latch handle

CLEARANCE

• Minimum of 4" clearance re­quired on cabinet back and sides

THERMOSTAT RANGE

• Heating: 80° to 185°F
(27° to 85°C)

• Proofing: 80° to 135°F
(27° to 57°C)

PANS

• Maximum ledge load: 30 lbs. per
ledge

• Standard ledge spacing: 3" or
41/2"

• Ledge spacing can also be ad­justed to 33/4", 51/4", 6" and 63/4"
without additional ledges

• Optional ledge kit allows 11/2"
spacing

• Pan/tray accomodations:

–18" x 26"
–18" x 13"
–12" x 20"

WARRANTY

• Limited one year parts and labor

OPTIONS

❑

11/2" spaced ledge kit

908 Highway 15 North • New Albany, MS 38652
PHONE: [phone] or 662-534-9061 • FAX: [phone] or 662-534-6049 • www.master-bilt.com

HP6A-LX SERIES

COMBINATION HEATER/PROOFING CABINET, NON-INSULATED

TECHNICAL SPECIFICATIONS

1

DIMENSIONS

(in.)

MODEL

HP6A-LX 263/4321/4713/4679 819 1822 115 1900 17 34 12 24 370/168 44.0 240/109

DIMENSIONS

(mm)

VOLTS

HEATING

UNIT

WATTS

3" LEDGE SPACING

(BOTTOM LOAD)

PAN CAPACITY

18 x 26

END

LOAD

12 x 20

SIDE

LOAD

/2" LEDGE SPACING

4

(BOTTOM LOAD)

PAN CAPACITY

18 x 26

END

LOAD

12 x 20

SIDE

LOAD

MAX.

CABINET

STATIC

LOAD

(LB/KG)

SHIP

CU.

FT.

SHIP

WT.

(LB/

KG)L D H L D H

ELEVATION VIEW SIDE VIEW

LISTINGS HOOKUP

Via plug in, 9 foot long flexible
three wire 12/3 SJO cord with
molded plug.

BID SPECIFICATIONS

Item no. HP6A-LX.
Provide____________( ) Combination
Heater/Proofing Cabinet, Non-Insulated.

Cabinet will have die-formed, corrosion
resistant aluminum body and door with
14 gauge galvanized caster base. Cabinet
will be provided with bottom mounted, re­movable, externally controlled, 1900 watt
holding/proofing unit having main on/off

All specifications subject to change without notice.

908 Highway 15 North • New Albany, MS 38652
PHONE: [phone] or 662-534-9061 • FAX: [phone] or 662-534-6049 • www.master-bilt.com

switch, dual thermostats, digital thermom­eter, holding or proofing selector switch
and 12 hour timer for proofing.

Cabinet will have field reversible door
with positive latching handle and gasket,
270° door swing, adjustable damper, drip
trough and louvered air tunnel for even
heat distribution.

Cabinet will be provided with four 5-inch

The above tray/pan sizes can be
loaded in the same cabinet.

PAN CONFIGURATION

NEMA 5-20P, 115V

standard duty swivel plate casters having
modulus wheels. Two casters will have brakes.

Electrical hookup will be via a nine foot
long flexible three wire 12/3 SJO cord with
molded NEMA 5-20P, 115v plug.

Cabinet to have limited one year parts
and labor warranty.

Cabinet to be to be UL and C-UL listed
and UL EPH classified.

©2014 Master-Bilt Products, an unincorporated division of Standex International Corporation. All rights reserved. Printed in U.S.A.

1289-1/14-web