Kontron EZ3-VX304x-00-L User Manual
» EZ3-VX304x-00-L «
Quick Start
SD.DT.G12-0e - November 2012
_________________________________________________________________________________________
Ordering Information
System type EZ3-VX304x-00-L
4 EZ3-VX3042-00-L 3U VPX Intel® Core™ i7 Dual Core Computer. Linux software version.
4 EZ3-VX3044-00-L 3U VPX Intel® Core™ i7 Quad Core Computer. Linux software version.
If it's embedded, it's Kontron.
EZ3-VX304x-00-L
Quick Start
11
3
1
2
4
5
6
Front View
1. Reset Button
2. Status LEDs L1, L2, L3, L4, L5
3. Mini DisplayPort
4. Gigabit Ethernet ETH
5. Serial Connector COM1
EZ3-VX304x-00-L is ready to use: its factory
settings can get you to a shell prompt under
Linux OS or VxWorks in a few seconds.
See the EZ3-VX304x Getting Started
Documentation (SD.DT.G09) for a detailled
system description.
Embedded Software Informa
tion - Operating System
4Linux Fedora 16 64-bit
(Kernel-2.6.35.6)
Plug
To connect the EZ3-VX304x-00-L 3U VPX
Intel or x86 Computer, you need to connect
the following cables:
4the power supply cable (12) in the power
supply connector (7)
4the serial cable KIT-RJ12DB9 (11) in the
serial connector (5)
4Mini DisplayPort: a display can be
attached to the port (3) for graphics
console interface
4USB: for mouse and keyboard use this
port (6). A USB hub is provided (14).
Play - Start the system
The ON/OFF button (8) is located on the
rear panel of the EZ3-VX304x-00-L system.
4Power on the main power supply module,
AC Switch on the rear side of the system.
7
8
Rear View
6. USB 2.0
7. Power Supply Connector
8. AC Switch
9. USB 3.0
10. 10 Gigabit Ethernet Connector
Play – Evaluate the system
4Pre-Installed Benchmark:
Lmbench is a suite of benchmark interesting
especially for memory bandwith and
latency. To launch the benchmark, the path
/usr/share/vx304x_benchmark
is
4PBIT(Power on Built In Test):
Tests a computer platform prior to launch
the main software. Can be launched from
the BIOS and quickly evaluated using its
interactive mode. PBIT is optional for each
SBC and is always part of Easy Evaluation
Systems.
Linux System Parameters
4Root account login: root
4Guest account login: guest
4Networking
EZ3-VX304x-00-L has several Ethernet
ports configured, named
vxeth0.
All of them are configured with a private
static IP which depends on the board geoid.
em1 (4) (gigabit Ethernet / hardware name:
ETH on front panel) is configured on the
192.168.0 network.
vxeth0 (VxFabric TCP/IP on PCIe) is
configured on the 192.168.10 network. As
the board is alone on the backplane, this port
is useless (EZ3-VX3044-A0-L use case
only).
password: kontron
password: guest
em1, p16p2 and
5
12
3
4
10
9
13
6
14
11. KIT_RJ12DB9
12. Power Supply Cable
13. DP-VGA Adapter
14. USB Hub
4System Storage
System is installed on the soldered 32 GB
SATA flash. Storage is organised with a
/boot partition and large /and/home
small
partitions spanning the rest of the disk.
4Serial Line / Console Output
EZ3-VX304x-00-L front panel serial line is
managed by Linux and a login prompt is
offered on it .
Characteristics of the serial line:
Baudrate: 115200 - Parity:None Data Bits: 8 - Stop Bit: 1
Flow Control: None
Display
Graphical display is provided through the
DiplayPort connector. However boot loa
ding is only displayed through
console.
ttys0
Play - Stop the system
4Shutdown the Operating System.
4Power off the main power supply module
(AC Switch on the rear side of the system)
(8).
SD.DT.G12-0e Page 1
Loading...