Kontron CP6005X-SA User Manual
» User Guide «
CP6005(X)-SA
Doc. ID: 1055-2501, Rev. 1.0
Date: December 20, 2013
D R A F T — F O R I N T E R N A L U S E O N L Y
The pulse of innovation
User Guide
CP6005(X)-SA
Revision History
Revision Brief Description of Changes Date of Issue
1.0 Initial issue 20-Dec-2013
Imprint
Kontron Europe GmbH may be contacted via the following:
MAILING ADDRESS TELEPHONE AND E-MAIL
Kontron Europe GmbH +49 (0) 800-SALESKONTRON
Sudetenstraße 7 sales@kontron.com
D - 87600 Kaufbeuren Germany
For further information concerning other Kontron products, please visit our Internet website:
www.kontron.com.
Disclaimer
Copyright © 2013 Kontron AG. All rights reserved. All data is for information purposes only and not
guaranteed for legal purposes. Information has been carefully checked and is believed to be accurate;
however, no responsibility is assumed for inaccuracies. Kontron and the Kontron logo and all other
trademarks or registered trademarks are the property of their respective owners and are recognized.
Specifications are subject to change without notice.
www.kontron.com
D R A F T — F O R I N T E R N A L U S E O N L Y
2
User Guide
CP6005(X)-SA
Contents
Revision History ..........................................................................................................2
Imprint .....................................................................................................................2
Disclaimer ..................................................................................................................2
Contents ....................................................................................................................3
Tables .......................................................................................................................7
Figures ......................................................................................................................9
Warranty .................................................................................................................. 10
Proprietary Note ........................................................................................................ 10
Trademarks .............................................................................................................. 10
Environmental Protection Statement .............................................................................. 10
1 Introduction ...................................................................................... 11
1.1 Board Overview .......................................................................................... 11
1.2 System Expansion Capabilities ....................................................................... 12
1.2.1 PMC Module ............................................................................................... 12
1.2.2 XMC Module ............................................................................................... 12
1.2.3 CP6005(X)-SA-MK2.5SATA Assembly Kit ........................................................... 12
1.2.4 SATA Flash Module ...................................................................................... 12
1.2.5 Rear I/O Module ......................................................................................... 12
1.3 Board Diagrams.......................................................................................... 13
1.3.1 Functional Block Diagram ............................................................................. 13
1.3.2 Front Panel ............................................................................................... 14
1.3.3 Board Layout ............................................................................................. 15
1.4 Technical Specification ................................................................................ 18
1.5 Standards ................................................................................................. 23
1.6 Related Publications.................................................................................... 24
2 Functional Description ......................................................................... 25
2.1 Processor and Chipset.................................................................................. 25
2.1.1 Integrated Processor Graphics Controller ......................................................... 26
2.2 Memory .................................................................................................... 26
2.3 Watchdog Timer.......................................................................................... 26
2.4 Battery..................................................................................................... 26
2.5 Flash Memory............................................................................................. 27
2.5.1 SPI Boot Flash for uEFI BIOS .......................................................................... 27
2.5.2 SATA Flash Module ...................................................................................... 27
2.6 Trusted Platform Module 1.2.......................................................................... 27
2.7 Board Interfaces......................................................................................... 28
2.7.1 Front Panel LEDs......................................................................................... 28
2.7.1.1 Watchdog and Temperature Status LEDs .......................................................... 28
D R A F T — F O R I N T E R N A L U S E O N L Y
www.kontron.com
3
User Guide
CP6005(X)-SA
2.7.1.2 IPMI LEDs and HS LED .................................................................................. 29
2.7.1.3 General Purpose LEDs.................................................................................. 29
2.7.2 USB Interfaces ........................................................................................... 31
2.7.3 VGA Interface ............................................................................................ 31
2.7.4 Serial Ports ............................................................................................... 32
2.7.5 Gigabit Ethernet ......................................................................................... 32
2.7.5.1 10 Gigabit Ethernet Interfaces (CP6005X-SA) .................................................... 33
2.7.6 SATA Interfaces .......................................................................................... 33
2.7.7 PMC Interface ............................................................................................ 33
2.7.8 XMC Interface ............................................................................................ 34
2.7.9 CompactPCI Interface .................................................................................. 34
2.7.9.1 Board Functionality when Installed in System Slot.............................................. 34
2.7.9.2 Board Functionality when Installed in System Slot.............................................. 34
2.7.9.3 Board Functionality when Installed in Peripheral Slot (Passive Mode) ..................... 35
2.7.9.4 Packet Switching Backplane (PICMG 2.16) ........................................................ 35
2.7.9.5 Hot Swap Support ....................................................................................... 35
2.7.9.6 Power Ramping .......................................................................................... 35
2.7.9.7 Precharge ................................................................................................. 35
2.7.9.8 Handle Switch............................................................................................ 35
2.7.9.9 ENUM# Interrupt ........................................................................................ 35
2.7.9.10 Hot Swap LED............................................................................................. 35
2.7.10 CompactPCI Connectors ............................................................................... 36
2.7.10.1 Connector Keying ....................................................................................... 36
2.7.10.2 CompactPCI Connectors J1 and J2 Pinout ......................................................... 37
2.7.10.3 CompactPCI Rear I/O Connectors J3 and J5 Pinout.............................................. 40
2.7.10.4 High-Speed Serial Rear I/O Connectors J41 and J4 Pinout (CP6005X-SA) ................. 43
2.7.11 High-Speed Serial Rear I/O Interconnection ..................................................... 45
3 Configuration..................................................................................... 46
3.1 DIP Switch Configuration.............................................................................. 46
3.1.1 DIP Switch SW1 .......................................................................................... 46
3.1.2 DIP Switch SW2 .......................................................................................... 46
3.2 System Write Protection ............................................................................... 47
3.3 CP6005(X)-SA-Specific Registers .................................................................... 47
3.3.1 Write Protection Register (WPROT) .................................................................. 47
3.3.2 Reset Status Register (RSTAT) ........................................................................ 48
3.3.3 Board ID High Byte Register (BIDH) ................................................................ 49
3.3.4 Geographic Addressing Register (GEOAD) ......................................................... 49
3.3.5 Watchdog Timer Control Register (WTIM) ......................................................... 50
3.3.6 Board ID Low Byte Register (BIDL) .................................................................. 51
3.3.7 LED Configuration Register (LCFG) .................................................................. 51
3.3.8 LED Control Register (LCTRL) ......................................................................... 52
3.3.9 General Purpose Output Register (GPOUT)......................................................... 53
3.3.10 General Purpose Input Register (GPIN)............................................................ 53
4 Power Considerations .......................................................................... 54
D R A F T — F O R I N T E R N A L U S E O N L Y
www.kontron.com
4
User Guide
CP6005(X)-SA
4.1.1 Start-Up Requirement .................................................................................. 54
4.1.2 Power-Up Sequence..................................................................................... 54
4.1.3 Regulation ................................................................................................ 55
4.2.1 Power Consumption of the CP6005(X)-SA Accessories .......................................... 58
4.2.2 Power Consumption per Gigabit Ethernet Port ................................................... 58
4.2.3 Power Consumption per 10 Gigabit Ethernet Port (CP6005X-SA)............................. 58
4.2.4 Power Consumption of PMC Module ................................................................. 58
4.2.5 Power Consumption of XMC Modules ................................................................ 59
5 Thermal Considerations ........................................................................ 60
5.1 Operational Limits for the CP6005(X)-SA .......................................................... 61
5.1.1 Peripherals ............................................................................................... 63
6 CP6005(X)-SA-MK2.5-SATA Assembly Kit ................................................. 64
6.1 MMADP-SATA01 Module Overview.................................................................... 64
6.2 Technical Specifications ............................................................................... 64
6.3 MMADP-SATA01 Module Layout ...................................................................... 64
7 SATA Flash Module............................................................................... 65
7.1 Technical Specifications ............................................................................... 65
7.2 SATA Flash Module Layout............................................................................. 65
8 Installation ....................................................................................... 66
8.1 Safety ...................................................................................................... 66
8.2 General Instructions on Usage ....................................................................... 66
8.3 Board Installation ...................................................................................... 67
8.3.1 Hot Swap Insertion..................................................................................... 67
8.3.2 Hot Swap Removal ...................................................................................... 67
8.4 Installation of Peripheral Devices ................................................................... 68
8.4.1 SATA Flash Module Installation ...................................................................... 69
8.4.2 Installation of External SATA Devices .............................................................. 69
8.4.3 Onboard 2.5” HDD/SSD Installation ................................................................ 69
8.4.4 PMC Module Installation ............................................................................... 69
8.4.5 XMC Module Installation ............................................................................... 69
8.4.6 Rear Transition Module Installation ................................................................ 69
8.5 Battery Replacement ................................................................................... 69
9 uEFI BIOS .......................................................................................... 70
9.1 Starting the uEFI BIOS ................................................................................. 70
9.2 Setup Menus.............................................................................................. 71
9.2.1 Main Setup Menu ........................................................................................ 71
9.2.2 Advanced Setup Menu .................................................................................. 72
9.2.3 Security Setup Menu .................................................................................... 72
9.2.3.1 Remember the Password ............................................................................... 73
9.2.4 Boot Setup Menu ........................................................................................ 73
www.kontron.com
D R A F T — F O R I N T E R N A L U S E O N L Y
5
User Guide
CP6005(X)-SA
9.2.5 Exit Setup Menu ......................................................................................... 73
9.3 The uEFI Shell ............................................................................................ 74
9.3.1 Introduction, Basic Operation ....................................................................... 74
9.3.1.1 Entering the uEFI Shell ................................................................................ 74
9.3.1.2 Exiting the uEFI Shell .................................................................................. 74
9.3.2 Kontron-Specific uEFI Shell Commands ............................................................ 75
9.4 uEFI Shell Scripting..................................................................................... 76
9.4.1 Startup Scripting ........................................................................................ 76
9.4.2 Create a Startup Script ................................................................................. 76
9.4.3 Examples of Startup Scripts........................................................................... 77
9.4.3.1 Execute Shell Script on Other Harddrive ........................................................... 77
9.4.3.2 Enable Watchdog ........................................................................................ 77
9.4.3.3 Handling the Startup Script in the SPI Boot Flash ............................................... 77
9.5 Firmware Update ........................................................................................ 78
9.5.1 Updating the uEFI BIOS ................................................................................ 78
9.5.1.1 uEFI BIOS Fail-Over Mechanism ...................................................................... 78
9.5.1.2 Updating Procedure .................................................................................... 78
9.5.1.3 uEFI BIOS Recovery ..................................................................................... 79
9.5.1.4 Determining the Active Flash......................................................................... 79
9.5.2 Updating the IPMI Firmware .......................................................................... 79
9.5.2.1 IPMI Rollback Mechanism ............................................................................. 79
9.5.2.2 Determining the Active IPMI Firmware Image .................................................... 79
9.5.2.3 Updating Procedure .................................................................................... 79
10 IPMI Firmware .................................................................................... 80
10.1 Overview................................................................................................... 80
10.2 IPMI Firmware and KCS Interface Configuration ................................................. 81
10.3 Supported IPMI and ATCA Commands ............................................................... 81
10.3.1 Standard IPMI Commands ............................................................................ 81
10.3.2 AdvancedTCA and AMC Commands ................................................................... 84
10.4 Firmware Identification................................................................................ 85
10.4.1 Get Device ID Command ............................................................................... 85
10.4.2 Device Locator Record.................................................................................. 86
10.5 Board Control Extensions ............................................................................. 86
10.5.1 SPI Boot Flash Selection—uEFI BIOS Failover Control .......................................... 86
10.5.2 uEFI BIOS Boot Order Selection ...................................................................... 86
10.5.3 Set Control State (SPI Boot Flash Selection, Boot Order Selection) ......................... 87
10.5.4 Get Control State (SPI Boot Flash Selection, Boot Order Selection)......................... 88
10.6 Sensors Implemented on the Board................................................................. 89
10.6.1 Sensor List ................................................................................................ 89
10.7 Sensor Thresholds....................................................................................... 92
10.8 OEM Event/Reading Types ............................................................................. 93
10.9 IPMI Firmware Code..................................................................................... 94
10.9.1 Firmware Upgrade....................................................................................... 94
10.9.2 IPMI Firmware and FRU Data Write Protection .................................................... 94
10.10 LAN Functions............................................................................................ 94
D R A F T — F O R I N T E R N A L U S E O N L Y
www.kontron.com
6
User Guide
CP6005(X)-SA
Tables
1 CP6005(X)-SA Main Specifications ......................................................................... 18
2 Standards ........................................................................................................ 23
3 Additional Standards for Boards Ordered with Ruggedized Service ................................. 23
4 Related Publications ........................................................................................... 24
5 Features of the Processors Supported on the CP6005(X)-SA ......................................... 25
6 Watchdog and Temperature Status LEDs’ Functions .................................................... 28
7 IPMI and HS LEDs’ Functions ................................................................................. 29
8 General Purpose LEDs’ Functions on the CP6005-SA ................................................... 30
9 General Purpose LEDs’ Functions on the CP6005X-SA .................................................. 30
10 POST Code Sequence ........................................................................................... 31
11 POST Code Example ............................................................................................. 31
12 Serial Port Connector J8 Pinout ............................................................................. 32
13 Gigabit Ethernet Controller Port Mapping ................................................................ 32
14 10 Gigabit Ethernet Controller Port Mapping ............................................................ 33
15 PMC PCI Frequency Configuration ........................................................................... 33
16 CompactPCI PCI/ PCI-X Configuration ..................................................................... 34
22 CompactPCI Rear I/O Connector J3 Signals ............................................................... 41
24 CompactPCI Rear I/O Connector J5 Signals ............................................................... 42
27 High-Speed Serial Rear I/O Connectors J41 and J4 Signal Description ............................ 44
28 High-Speed Serial Rear I/O Interconnection Port Mapping ........................................... 45
29 DIP Switch SW1 Functionality ................................................................................ 46
30 DIP Switch SW2 Functionality ................................................................................ 46
31 CP6005(X)-SA-Specific Registers ........................................................................... 47
32 Write Protection Register (WPROT) ......................................................................... 47
33 Reset Status Register (RSTAT) ............................................................................... 48
34 Board ID High Byte Register (BIDH) ....................................................................... 49
35 Geographic Addressing Register (GEOAD) ................................................................ 49
36 Watchdog Timer Control Register (WTIM) ................................................................. 50
37 Board ID Low Byte Register (BIDL) ......................................................................... 51
38 LED Configuration Register (LCFG) ......................................................................... 51
39 LED Control Register (LCTRL) ................................................................................ 52
40 General Purpose Output Register (GPOUT) ................................................................ 53
41 General Purpose Input Register (GPIN) .................................................................... 53
42 DC Operational Input Voltage Range ....................................................................... 54
43 Workload: uEFI Shell ........................................................................................... 57
44 Workload: Idle .................................................................................................. 57
45 Workload: Typical ............................................................................................... 57
46 Workload: Maximum ........................................................................................... 57
47 Power Consumption of CP6005(X)-SA Accessories ...................................................... 58
48 Power Consumption per Gigabit Ethernet Port ........................................................... 58
49 Power Consumption per 10 Gigabit Ethernet Port ....................................................... 58
50 PMC Module Current ............................................................................................ 58
51 XMC Module Current ............................................................................................ 59
52 MMADP-SATA01 Main Specifications ....................................................................... 64
53 SATA Flash Module Main Specifications ................................................................... 65
D R A F T — F O R I N T E R N A L U S E O N L Y
www.kontron.com
7
User Guide
CP6005(X)-SA
54 Navigation ....................................................................................................... 70
55 Main Setup Menu Sub-Screens and Functions ............................................................ 71
56 Advanced Setup Menu Sub-Screens and Functions ..................................................... 72
57 Security Setup Menu Functions .............................................................................. 72
58 TPM Configuration Sub-Screen .............................................................................. 72
59 Boot Priority Order ............................................................................................. 73
60 Exit Setup Menu Functions ................................................................................... 73
61 Kontron-Specific uEFI Shell Commands ................................................................... 75
www.kontron.com
D R A F T — F O R I N T E R N A L U S E O N L Y
8
Loading...