Kontron 820951 ADD2-DVI-Dual-Internal, 820952 ADD2-DVI-Dual, 820955 ADD2-DVI-Dual-Internal-C01, 820958 ADD2-DVI-Dual-Internal-150 User Manual
ADD2-DVI-Dual
KTD-00714-F Public User Manual Date: 2008-11-25 Page 1 of 9
User Manual
for the Add-On cards:
820951 ADD2-DVI-Dual-Internal
820952 ADD2-DVI-Dual
820955 ADD2-DVI-Dual-Internal-C01
820958 ADD2-DVI-Dual-Internal-150
AGP Digital Display second generation card with Dual DVI transmitters
Designed primarily for 986LCD-M family and KT965/Flex motherboards.
Pending is support for KTQ45, KTG41 and KTGM45 motherboards.
820951 ADD2-DVI-Dual-Internal
820958 ADD2-DVI-Dual-Internal-150
820952 ADD2-DVI-Dual
820955 ADD2-DVI-Dual-Internal-C01
ADD2-DVI-Dual-
Internal
ADD2-DVI-Dual
ADD2-DVI-Dual-
Internal-C01
ADD2-DVI-Dual-
Internal-150
Part no. 820951 820952 820955 820958
PCB no. 30103291 30103281 30103311 30103291
Ass. no. 68910000 68810000 69000000 68910000
Note
Incl. 2 x 300mm cable
Incl. 300 mm cable
Incl. 2 x 300mm cable Incl. 2 x 150mm cable
ADD2-DVI-Dual
KTD-00714-F Public User Manual Date: 2008-11-25 Page 2 of 9
Document revision history.
Revision Date By Comment
F Nov 25th 2008 MLA BIOS version info added. More modules added.
E Oct. 31st 2007 MLA Design update. Corrections and more info added.
D Sept. 27th, 2007 MLA Item no. corrected on front page. Added text.
C Sept. 7th, 2007 MLA Installation guide added.
B Aug. 22nd 2007 MLA Picture changed.
A Aug. 10th 2007 MLA Picture added.
0 Feb. 23rd 2007 MLA Preliminary version.
Copyright Notice:
Copyright © 2007, KONTRON Technology A/S, ALL RIGHTS RESERVED.
No part of this document may be reproduced or transmitted in any form or by any means, electronically or
mechanically, for any purpose, without the express written permission of KONTRON Technology A/S.
Trademark Acknowledgement:
Brand and product names are trademarks or registered trademarks of their respective owners.
Disclaimer:
KONTRON Technology A/S reserves the right to make changes, without notice, to any product, including
circuits and/or software described or contained in this manual in order to improve design and/or performance.
Specifications listed in this manual are subject to change without notice. KONTRON Technology assumes no
responsibility or liability for the use of the described product(s), conveys no license or title under any patent,
copyright, or mask work rights to these products, and makes no representations or warranties that these
products are free from patent, copyright, or mask work right infringement, unless otherwise specified.
Applications that are described in this manual are for illustration purposes only. KONTRON Technology A/S
makes no representation or warranty that such application will be suitable for the specified use without
further testing or modification.
ADD2-DVI-Dual
KTD-00714-F Public User Manual Date: 2008-11-25 Page 3 of 9
Life Support Policy
KONTRON Technology’s PRODUCTS ARE NOT FOR USE AS CRITICAL COMPONENTS IN LIFE
SUPPORT DEVICES OR SYSTEMS WITHOUT EXPRESS WRITTEN APPROVAL OF THE GENERAL
MANAGER OF KONTRON Technology A/S.
As used herein:
1. Life support devices or systems are devices or systems whi ch, (a) are intend ed for surgical implant into
body, or (b) support or sustain life and whose failure to perform, when properly used in accordance with
instructions for use provided in the labeling, can be reasonably expected to result in significant injury to
the user.
2. A critical component is any component of a life support device or system whose failure to perform can be
reasonably expected to cause the failure of the life support device or system, or to affect its safety or
effectiveness.
KONTRON Technology Technical Support and Services
If you have questions about installing or using your KONTRON Technology Product, check this User’s
Manual first – you will find answers to most questions here. To obtain support, please contact your local
Distributor or Field Application Engineer (FAE).
Before Contacting Support: Please be prepared to provide as much information as possible:
ADD-On Board
1. Type.
2. Part-number (Number starting with “68”).
Configuration
1. Motherboard Type
2. BIOS Revision (Find the Version Info (BIOS ID) in the BIOS Setup Menu)
3. BIOS Settings different than Default Settings (Display related settings).
4. O/S Make and Version.
5. Graphic Driver Version numbers.
6. Attached LCD Panel(s) etc.
ADD2-DVI-Dual
KTD-00714-F Public User Manual Date: 2008-11-25 Page 4 of 9
Table of contents:
INTRODUCTION................................................................................................................................................5
MECHANICAL DRAWING.................................................................................................................................5
FUNCTIONAL DIAGRAM..................................................................................................................................6
INCLUDED DVI CABLE.....................................................................................................................................7
CONNECTOR DESCRIPTION...........................................................................................................................8
JUMPER DESCRIPTION (UNSUPPORTED)....................................................................................................9
INSTALLATION GUIDE.....................................................................................................................................9
ELECTRICAL SPECIFICATION........................................................................................................................9
ADD2-DVI-Dual
KTD-00714-F Public User Manual Date: 2008-11-25 Page 5 of 9
Introduction
• Dual DVI Transmitter each working as Single Transmitter up to 165Mpixels/s
• Panel resolution up to 1920x1200 or similar
• Monitor Detection supported through Hot Plug or Receiver Sense
• DVI 1.0 compliant
• High-speed SDVO1 serial (1G~2Gbps) AC-coupled
• Differential RGB inputs
• Complete Windows and DOS driver support
• Included DVI Cables to implement dual DVI connectors
• DVI Bracket (Full Height) and screws are included for the 820952 ADD2-DVI-Dual
The ADD2-DVI-Dual cards are based on the Silicon Image SiI1364 DVI transmitter. The ADD2-DVI-Dual is
equipped with two SiI1364 and supports two independent displays having resolutions up to 1920x1200
possible. The card is designed for the PCI-Expressx16 connector which on the 986LCD-M family of
motherboards and on the KT965/Flex motherboard is multiplexed PCI-Expressx16 and SDVO. When the
ADD2-DVI card is plugged into the PCI-Expressx16 connector then the motherboard automatically detects
the card and select SDVO output. The card operates at pixel rates of up to 165MHz per link, supporting
1920x1200 panels at a 60Hz refresh rate.
Mechanical Drawing
MB PCB
Measures in mm
45.0
44.0
96.4
MB PCI-Expressx16
DVI-I
DVI-SIL
820952/820958 ADD2-DVI-Dual
12.4
45.0
42.4
96.4
MB PCI-Expressx16
820951 ADD2-DVI-Dual-Internal
42.0
4.1
93.0
Mounting holes diam. 3.0 mm
820955 ADD2-DVI-Dual-lnternal, super low profile 30.0 x 106.0 mm
MB PCB
ADD2-DVI-Dual
KTD-00714-F Public User Manual Date: 2008-11-25 Page 6 of 9
Functional Diagram
Note that VBIOS located in I2C is not used as default. The reason is that the BIOS used in the Kontron
Motherboards of 986LCD-M and KT965 families are supporting the ADD2-DVI card directly.
PCI-Expressx16 connector
Motherboard with multiplexed PCI-Expressx16/SDVO connector
SDVO to DVI
Converter #1
DVI connector DVI-I
VBIOS
I2C PROM
(option)
5V Current limited
su
pply
SDVO to DVI
Converter #2
DVI connector DVI-SIL
SDVO
SDVO-B SDVO-C
ADD2-DVI-Dual
PCI-Expressx16 connector
Motherboard with multiplexed PCI-Expressx16/SDVO connector
SDVO to DVI
Converter #1
DVI connector DVI-SIL
VBIOS
I2C PROM
5V Current limited
supply
SDVO to DVI
Converter #2
DVI connector DVI-SIL
SDVO
SDVO-B SDVO-C
DIP-Switches (DIP-SW
)
ADD2-DVI-Dual-Internal
EDID I2C
PROM#2
EDID I2C
PROM#1
ADD2-DVI-Dual
KTD-00714-F Public User Manual Date: 2008-11-25 Page 7 of 9
Included DVI Cable
DVI cable (item no. 821524 ADD2-DVI Aux Cable 300mm or 1022-2966 ADD2-DVI Aux Cable 150mm) is
included.
820951 includes two 821524 ADD2-DVI Aux Cable 300mm
820952 includes one 821524 ADD2-DVI Aux Cable 300mm
820955 includes two 821524 ADD2-DVI Aux Cable 300mm
820958 includes two 1022-2966 ADD2-DVI Aux Cable 150mm
Example: 820951 ADD2-DVI-Dual-Internal with cables mounted.
The 821524 and 1022-2966 cable kits are based on two pieces of Hirose DF19L-20P-1H connector. The
wiring is a one-to-one connection. The cable kit includes a DVI-SIL to DVI-I converter module.
Cable wiring:
DVI-SIL 1 DVI-SIL 2 DVI-I
Pin No. Pin No. Pin No. Signal
1 1 - GND
2 2 - GND
3 3 14 +5V (55mA)
4 4 16 Hot Plug Detect
5 5 15 GND
6 6 7 DDC Data
7 7 6 DDC Clock
8 8 - GND
9 9 24 TMDS Clock10 10 23 TMDS Clock+
11 11 22 GND
12 12 17 TMDS Data 013 13 18 TMDS Data 0+
14 14 19 GND
15 15 9 TMDS Data 116 16 10 TMDS Data 1+
17 17 11 GND
18 18 1 TMDS Data 219 19 2 TMDS Data 2+
20 20 3 GND
ADD2-DVI-Dual
KTD-00714-F Public User Manual Date: 2008-11-25 Page 8 of 9
Connector Description
The DVI-I connector is a Molex 74320-1004 (or similar). Only DVI Digital output is supported.
(Both DVI-I and DVI-D cables can be connected).
The DVI-SIL, is a Hirose DF19G-20P-1H. Mating connector is Hirose DF19L-20P-1H or simi lar.
Pin No. Signal Type Pull Up
1 TMDS Data 2- LVDS OUT
2 TMDS Data 2+ LVDS OUT
3 TMDS Data 2/4 Shield PWR
4 N.C. -
5 N.C. -
6 DDC Clock IO 2K2
7 DDC Data IO 2K2
8 N.C. -
9 TMDS Data 1- LVDS OUT
10 TMDS Data 1+ LVDS OUT
11 TMDS Data 1/3 Shield PWR
12 N.C. -
13 N.C. -
14 +5V (55mA) PWR
15 GND PWR
16 Hot Plug Detect I
17 TMDS Data 0- LVDS OUT
18 TMDS Data 0+ LVDS OUT
19 TMDS Data 0/5 Shield PWR
20 N.C. -
21 N.C. -
22 TMDS Clock Shield PWR
23 TMDS Clock+ LVDS OUT
24 TMDS Clock- LVDS OUT
C1 - C5 N.C. -
Pin No. Signal Type Pull Up
1 GND PWR
2 GND PWR
3 +5V (55mA) PWR
4 Hot Plug Detect I
5 GND PWR
6 DDC Data IO 2K2
7 DDC Clock IO 2K2
8 GND PWR
9 TMDS Clock- LVDS OUT
10 TMDS Clock+ LVDS OUT
11 GND PWR
12 TMDS Data 0- LVDS OUT
13 TMDS Data 0+ LVDS OUT
14 GND PWR
15 TMDS Data 1- LVDS OUT
16 TMDS Data 1+ LVDS OUT
17 GND PWR
18 TMDS Data 2- LVDS OUT
19 TMDS Data 2+ LVDS OUT
20 GND PWR
Shield GND PWR
1 8
9 16
17 24
C1 C2
C3 C4
C5
Front view
ADD2-DVI-Dual
KTD-00714-F Public User Manual Date: 2008-11-25 Page 9 of 9
Jumper Description (unsupported)
The Jumpers (only available on the ADD2-DVI-Dual-Internal) are used to configure one or both DVI outputs
for TMDS or PanelLink panels where DDC (EDID codes) are not integrated. By use of jumpers it is possible
to connect onboard EEPROM to the DDC channel and to select panel to be always connected. The panel
specific EDID code must be loaded to the relevant EEPROM.
Signal Name pin pin Signal Name
DDCCLKU7 1 2 DDCCLK1
DDCDATU7 3 4 DDCDAT1
ALWAYSON1 5 6 HOTPLUG1
DDCCLKU8 7 8 DDCCLK2
DDCDATU8 9 10 DDCDAT2
ALWAYSON2 11 12 HOTPLUG2
When mounted jumpers 1-2, 3-4 and 5-6 then EEPROM (U7) then DVI-SIL1 will be configured for
TMDS/PanelLink displays (no integrated DDC and HotPlug).
Similar when mounted jumper 7-8, 9-10 and 11-12 then EEPROM (U8) then DVI-SIL2 will be configured for
TMDS/PanelLink displays.
Installation Guide
Plug in the ADD2-DVI card to the PCIe-x16 slot (nearest CPU)
Optionally fix the 820952 ADD2-DVI-Dual directly to DVI cut out hole in the chassis or mount the included
DVI Full Height Bracket + two screws (bracket/screws are not included in the revision below 820952-R13).
Optionally fix the 820955 ADD2-DVI-Dual-Internal to bracket or chassis via the mounting hole.
Optionally connect 821524 (300mm cable) or 1022-2966 (150mm cable) to the ADD2-DVI card
Optionally mount the DVI connector adapters in the chassis
For the 986LCD-M, BIOS 986LCD18 or above and for the KT965, BIOS KT965009 or above:
Boot and enter BIOS
Select Chipset > North Bridge Configuration > Video Function Configuration >
Boot Type = [CRT+EFP] or [EFP] (if boot on DVI panel no.1 is requested)
SDVO = [DVI – D]
Select Exit menu.
Hint: Using also Secure CMOS = [Enabled] will make sure that Windows will not change Boot Type in BIOS.
Save Changes and Exit.
Boot into OS and load Intel Graphics Media Driver. For Windows install version 6.14.10.4859
(win2K_xp1431.exe) or newer.
Select output to Digital Monitor (DVI panel no.1) and optionally Digital Monitor 2 (DVI panel no.2).
Electrical Specification
Power consumption:
The +5V available on the DVI connectors can deliver minimum 55mA continuously and 1A peak. The output
is protected by thermal shutdown circuit.
3.3V 5W/2.5W max. (Dual/Single).
12V 1W max.
Operating temperature: 0-60ºC
Loading...