Konica Minolta FS-135 User Manual
PARTS CATALOG
Rev. November, 2003
Model
FS-135
Used on Models 8020/8031
DECEMBER 2002
KONICA BUSINESS TECHNOLOGIES, INC.
HOW TO USE THIS CATALOG
This parts catalog includes illustrations and part numbers for all replacement parts and assemblies used in this model.
Model-specific parts are identified in the illustrations with reference
numbers. Use the reference number to locate the corresponding part
number on the facing page.
Common hardware items, such as screws, nuts, washers, and pins, are
identified in the illustrations with reference letters. Use the reference letter to locate the corresponding part number on the hardware listing in the
lower right hand corner of the facing page.
If you know a part number, but don’t know where the part is used, use
the numerical index to determine the page number and reference number for that part. Because some common parts are used in several
places, there may be more than one entry. Refer to the illustrations to see
where the part may be used.
If you know a part’s description, but don’t know where to look to find
the part number, use the alphabetical index to determine likely page and
reference numbers. Then look at the illustrations to determine that you
have identified the correct part. Locate the part number using the listing
on the opposite page.
Retail pricing that appears with the numerical index, while valid when
this catalog was printed, is subject to change without notice. The prices
are only suggested prices and are provided only for reference. Dealers
may determine their own selling prices. For up-to-date pricing, refer to
current Konica price lists or contact the Konica Parts Distribution Center.
How to order parts
Use standard Konica parts ordering procedures to obtain these parts.
For ordering options, contact Konica’s Parts Distribution Center.
When ordering parts, be sure to specify part numbers exactly as listed in
this catalog.
NOTE: Electrical parts may include previously used components.
Model FS-135 Konica Business Technologies, Inc. Page iii
1st Edition December, 2002
This page left blank intentionally.
Page iv Konica Business Technologies, Inc. Model FS-135
December, 2002 1st Edition
How to use this catalog . . . . . . . . . . . . . . . . . . . . . . . . . iii
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Housing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Frames . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Elevator Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Stapler Unit/Finisher Tray . . . . . . . . . . . . . . . . . . . . . . . . 10
Paper Transport Section . . . . . . . . . . . . . . . . . . . . . . . . 14
Paper Exit Section . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Horizontal Transfer Section . . . . . . . . . . . . . . . . . . . . . . . 22
Shift Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
CONTENTS
Horizontal Transport Unit . . . . . . . . . . . . . . . . . . . . . . . . 26
Alphabetical index . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Numerical index . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Model FS-135 Konica Business Technologies, Inc. Page 1
1st Edition December, 2002
HOUSING
Rev. March, 2003
Page 2 Konica Business Technologies., Inc. Model FS-135
December, 2002 1st Edition
Rev. November, 2003
REF. PART NUMBER DESCRIPTION
NO.
1 111Z12010 Front Cover
2 111Z12020 Cover
3 111Z97010 Label
4 111Z45010 Band
5 25TU42230 Plate
6 111Z12030 Top Cover
7 111Z12040 Rear Cover
8 111Z48010 Tray
9 111Z48020 Tray
10 111Z48030 Tray
11 111Z48040 Tray
12 111Z12050 Top Cover
13 111Z45030 Guide
14 111Z12060 Front Cover
15 111Z12070 Front Cover
16 111Z97020 Label
17 111Z97030 Label
18 111Z97040 Label
19 110Y97050 Label
20 13YL46110 Stopper
21 13YL42180 Guide
22 14GG97010 Label
HARDWARE
REF.
LTR.
a 00Z294081
b 00Z274081
c 00Z254081
d 00Z284081
e 00Z273081
f 00Z253081
g 00Z254061
PART
NUMBER
Model FS-135 Konica Business Technologies., Inc. Page 3
1st Edition December, 2002
FRAMES
Rev. March, 2003
Page 4 Konica Business Technologies., Inc. Model FS-135
December, 2002 1st Edition
Rev. November, 2003
REF. PART NUMBER DESCRIPTION
NO.
1 111Z45040 Cushion
2 25TU53110 Shoulder Screw
3 111Z12080 Cover
4 111Z45060 Film
5 111Z45070 Cap
6 111Y45090 Stopper
7 111Z45090 Plate Spring
8 111Z45100 Bracket
9 111Y45130 Ground Plate
10 111Y45120 Magnet Catch
11 111Z45130 Magnet Catch
12 111Z97060 Label
13 111Z12350 Guide
14 111Z12360 Rail
15 111Z46030 Bracket
16 111Z46020 Suction Plate
17 111Z46010 Shaft
18 111Y45020 Holder
19 111Z46050 Reinforce Plate
20 111Z46060 Bracket
21 111Z46070 Bracket
22 111Z12370 Caster
23 13YL42110 Spacer
24 111Z46210 Cap
HARDWARE
REF.
LTR.
a 00Z163081
b 00Z164121
c 00Z284081
d 111Z00010
e 00Z294081
f 00Z284101
g 00Z254081
h 00Z283081
i 00Z293061
PART
NUMBER
Model FS-135 Konica Business Technologies., Inc. Page 5
1st Edition December, 2002
FRAMES
Rev. March, 2003
Page 6 Konica Business Technologies., Inc. Model FS-135
December, 2002 1st Edition
Rev. March, 2003
REF. PART NUMBER DESCRIPTION
NO.
1 111Z45140 Torsion Spring
2 11YA86040 Microswitch/Set (S1)
3 111Z45150 Actuator
4 111T85070 Photosensor (PC12.17.18)
5 111Z-9250 PWB Assembly/Control (PWB-A)
6 111Z-9510 IC (IC3)
7 111Z45160 Guide
8 111Z45170 Screw
9 * Not used
10 111Z42850 Bracket
HARDWARE
REF.
LTR.
a 00Z283081
b 00Z163061
c 00Z284081
PART
NUMBER
Model FS-135 Konica Business Technologies., Inc. Page 7
1st Edition December, 2002
ELEVATOR DRIVE
Page 8 Konica Business Technologies., Inc. Model FS-135
December, 2002 1st Edition
Loading...