This parts catalog includes illustrations and part numbers for all replacement parts and assemblies used in this model.
Model-specific parts are identified in the illustrations with reference
numbers. Use the reference number to locate the corresponding part
number on the facing page.
Common hardware items, such as screws, nuts, washers, and pins, are
identified in the illustrations with reference letters. Use the reference letter to locate the corresponding part number on the hardware listing in the
lower right corner of the facing page.
If you know a part number, but don’t know where the part is used, use
the numerical index to determine the page number and reference number for that part. Because some common parts are used in several
places, there may be more than one entry. Refer to the illustrations to see
where the part may be used.
If you know a part’s description, but don’t know where to look to find
the part number, use the alphabetical index to determine likely page and
reference numbers. Then look at the illustrations to determine that you
have identified the correct part. Locate the part number using the listing
on the opposite page.
Retail pricing that appears with the numerical index, while valid when
this catalog was printed, is subject to change without notice. The prices
are only suggested prices and are provided only for reference. Dealers
may determine their own selling prices. For up-to-date pricing, refer to
current Konica price lists or contact the Konica Parts Distribution Center.
How to order parts
Use standard Konica parts ordering procedures to obtain these parts. For
ordering options, contact Konica’s Parts Distribution Center.
When ordering parts, be sure to specify part numbers exactly as listed in
this catalog.
NOTE: Electrical parts may include previously used components.
Model KL-3015/FORCE COLORKonica Business Technologies, Inc.Page iii
1st EditionMarch, 1998
This page left blank intentionally.
Page ivKonica Business Technologies, Inc.Model KL-3015/FORCE COLOR
March, 19981st Edition
How to use this catalog . . . . . . . . . . . . . . . . . . . . . . . . . iii
Model KL-3015/FORCE COLORKonica Business Technologies, Inc.Page v
1st EditionMarch, 1998
This page left blank intentionally.
Page viKonica Business Technologies, Inc.Model KL-3015/FORCE COLOR
March, 19981st Edition
Model KL-3015/FORCE COLORKonica Business Technologies, Inc.Page 1
1st EditionMarch, 1998
Main frame
Page 2Konica Business Technologies, Inc.Model KL-3015/FORCE COLOR
March, 19981st Edition
REF.PART NUMBERDESCRIPTION
NO.
108AA10450Ozone regulation cover (2)
208AA80510Main cooling fan
308AA10490PCB protect cover
408AA10240Desk support material (A)
508AA10530Desk support shaft
608AA10540Desk support shaft holder
708AA10420Developing wiring holder (Upper)
808AA10080Earth plate
908AA10180Charging pressure spring (A)
1008AA10410Write cleaner knob
1108AA10070Cover (Right)
1208AA-9440Desk inter PCB ass’y
1308AA90090Desk inter wiring
1408AA10050Ozone regulation cover
1508AA10060Cover (Left)
1608AA10110Drum earth plate
1708AA10250Desk support material (B)
1808AA10480Actuator (C)
1908AA10520Open close spring (C)
2008AA10360Open close spring (A)
2108AA10350Actuator (B)
2208AA-1010Lower main unit
2308AA10230Front door earth plate
2408AA10150Main heat insulating seal
Ref. nos. 50 to 54 are not available.
HARDWARE
REF.
LTR.
a00Z193041
b00Z193061
c00Z253081
PART
NUMBER
Model KL-3015/FORCE COLORKonica Business Technologies, Inc.Page 3
1st EditionMarch, 1998
Main frame
Page 4Konica Business Technologies, Inc.Model KL-3015/FORCE COLOR
March, 19981st Edition
REF.PART NUMBERDESCRIPTION
NO.
108AA84510DC power source
208AA41040Manual feed elevation roller
308AA41060Paper base plate
408AA41020Guide material (Left)
508AA-4210Double feed guide ass’y
608AA41030Guide material (Right)
708AA-9370Main inter PCB ass’y
808AA41230Manual feed pressure spring
908AA-9450Cassette detect PCB ass’y
1008AA90200Cassette detect wiring
1108AA40410Paper feed release plate
1208AA10550Cam rotary spring
1308AA10370Actuator (D)
1408AA10380Cassette lock
1508AA41140Double feed PV arm (A)
1608AA41120Fixed pressure spring
1708AA10220Foot
1808AA41160Manual feed detect spring
1908AA41240Paper detect actuator
2008AA41250Double feed PV arm (B)
2108AA40400Roller
2208AA40380Paper feed guide plate
2308AA90320Manual feed cord
Ref. nos. 50 to 54 are not available.
HARDWARE
REF.
LTR.
a00Z193061
b00Z253061
PART
NUMBER
Model KL-3015/FORCE COLORKonica Business Technologies, Inc.Page 5
1st EditionMarch, 1998
External parts
Page 6Konica Business Technologies, Inc.Model KL-3015/FORCE COLOR
March, 19981st Edition
REF.PART NUMBERDESCRIPTION
NO.
108AA12100Paper exit guide plate
208AA12090Rear cover
308AA12050Switch button
408AA12031Main cover (Right)
508AA12010Main cover (Upper)
608AA12180Paper exit holder plate (Upper)
708AA12060Toner supply fixed cover
808AA12120Front door release stay
908AA12110Front door pressure spring
1008AA12140Front door pressure claw (Left)
1108AA12070RF door (Right)
1208AA12080Developing door
1308AA12160Front door release knob
1408AA12170RF door (Left)
1508AA12130Front door pressure claw (Right)
1608AA12020Main cover (Left)
1708AA12190Paper exit holder plate (Middle)
HARDWARE
REF.
LTR.
a00Z193062
b00Z193102
c00Z253081
PART
NUMBER
Model KL-3015/FORCE COLORKonica Business Technologies, Inc.Page 7
1st EditionMarch, 1998
Operation unit
Page 8Konica Business Technologies, Inc.Model KL-3015/FORCE COLOR
March, 19981st Edition
REF.PART NUMBERDESCRIPTION
NO.
108AA-7000Operation unit
208AA70050Operation indication plate (P)
308AA70010Operation case
408AA87520Indication PCB
508AA-9400Operation PCB ass’y
608AA70040Operation cover
Ref. no. 50 is not available.
Model KL-3015/FORCE COLORKonica Business Technologies, Inc.Page 9
1st EditionMarch, 1998
Optics unit
Page 10Konica Business Technologies, Inc.Model KL-3015/FORCE COLOR