Konica Minolta DI850, PK-7 User Manual
PK-7 Punch Kit
User Manual
The optional PK-7 Punch Kit is now available to be mounted on the Di850.
This booklet provides the information on the specifications and operation
procedure of the PK-7, as well as the additional information on the “Memory Switch Setting” in the Section 13: Key Operator Mode of Di850 User
Manual. Use this booklet instead when referring to these pages.
Contents
PK-7 Punch Kit User Manual
Overview of the PK-7 Punch Kit..............................................................3
Installation Space........................................................................................................3
Main Body and PK-7 Punch Kit...................................................................................3
Standard/Optional Equipment.....................................................................................4
PK-7 Punch Kit............................................................................................................5
Paper in PK-7 Punch Kit .............................................................................................6
Specifications of PK-7 Punch Kit ................................................................................6
Operation of the PK-7 Punch Kit.............................................................7
Punching File Holes in Copies (Punch) ...................................................................... 7
Empty Trash Basket of PK-7 Punch Kit.................................................10
Memory Switch Setting Additional Information..........................................12
2003. 6
4027-7733-01
For U.S.A. Users
FCC Part 15-Radio Frequency Devices
NOTE: This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses, and radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.
WARNING: The design and production of this unit conform to FCC regulations, and
any changes or modifications must be registered with the FCC and are subject to
FCC control. Any changes made by purchaser or user without first contacting the
manufacturer will be subject to penalty under FCC regulations.
For Canada Users
Interference-Causing Equipment Standard (ICES-003 Issue 3)
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du
Canada.
Overview of the PK-7 Punch Kit
Installation Space
3.9
5.9
(150)
44.05
(1118)
21.5
(546)
6.9
(174)
34.9
(887)
24.65
(626)
(100)
15.7
(400)
(1560)
45.7
(1160)
61.4
37.4
(950)
Unit: inches (mm)
30.5
(775)
4.7
(120)
111.35
(2828)
141.8
(3601)
Di850 + FN-7 + PK-7 + TMG-2 + C-404
Main Body and PK-7 Punch Kit
PK-7 Punch kit
(option)
30.45
(773)
72.6
(1845)
PK-7 Punch kit (option) punches file holes in the output copies.
3
Overview of the PK-7 Punch Kit (continued)
Standard/Optional Equipment
Cover inserter C
FN-115 Finisher
I/F kit N
64MB Memory (M64-1) /
128MB Memory (M128-1)
FN-7 Finisher
TMG-2 Trimming unit
Di850 main body
Printer controller
PK-7 Punch kit or
ZK-3 Z-Fold kit
4
C-403 Large capacity cassette
C-404 Large capacity cassette
Loading...