Konica Minolta DI750, PK-1 User Manual
7664-4590-01
Punch Kit PK-1
for Di750
Operator’s Manual
This maunal explains the Punch Kit PK-1.
Refer to the Copier Operator’s Manual for use and functions of the Copier.
Contents
1. Machine Configuration ..........................................................2
2. Requirements for Safe Use...................................................5
3. Punching Mode .....................................................................6
4. Help Mode ............................................................................. 8
5. Finisher Adjustment [17] of Key Operator Mode.................10
6. Empty Trash Basket of Punch Kit PK-1 ..............................12
7. Clearing Mishandled Paper.................................................13
8. Specifications ......................................................................14
1
1. Machine Configuration
External Machine
FN-104/FN-4
Finisher (option)
Power switch
Left side cover
(not shown)
Front door
PK-1 Punch Kit
FN-4 Finisher (option)
Trimmer
stacker cover
LCD touch screen
Left door
Tray 1
Control panel
Tray 2
Right side door (not shown)
Tray 3
EDH
LCC left
side door
Work table
Multi-sheet
bypass tray
LCC top door
Tray 4: Large
capacity cassette
C-305(option)
LCC top door
TMG-1 Trimming unit
(option)
2
LCC left side door
Tray 4: Large
capacity cassette
C-305L (option)
External Machine Call-outs
1 EDH (Electronic Document Handler) automatically feeds multiple originals one at a time to
the platen glass for copying.
2 Work table provides a convenient workspace for documents both before and after copying.
3 Multi-sheet bypass tray used for small quantity copying onto plain paper or special paper.
4 LCC top door opens to allow loading paper.
5 Tray 4: Large capacity cassette C-305/C-305L option holds 4,000 sheets.
6 LCC left side door opens to allow removal of mishandled paper.
7 Right side door opens to allow removal of mishandled paper.
8 Tray 3 (universal tray) is user adjustable and holds 1,000 sheets of either 11"x17"/8.5"x14"/
8.5"x11"R or 5.5"x8.5".
9 Tray 2 (universal tray) is user adjustable and holds 500 sheets of either 11"x17"/8.5"x14"/
8.5"x11"R or 5.5"x8.5".
10 Tray 1 (universal tray) is user adjustable and holds 500 sheets of either 11"x17"/8.5"x14"/
8.5"x11"R or 5.5"x8.5".
NOTE: Tray 1, 2, 3, and 4 are available for loading wide types of the regular sizes specified above.
11 Left door opens together with the front door to allow removal of mishandled paper.
12 Front door opens to the internal copier to allow clearing of mishandled paper and
replenishing of toner.
13 Left side cover opens to allow removal of mishandled paper.
14 Power switch turns copier power On/Off when pressed.
15 TMG-1 Trimming Unit (option) trims the end of booklet.
16 Trimmer stacker cover opens to allow you to take out the finished sets.
17 FN-104/FN-4 Finisher (option) sorts, staple-sorts, and groups into finished sets. FN-4 also
folds or staples & folds copies into booklet-styled sets.
18 PK-1 Punch Kit (option) punches file holes in the output copies.
19 LCD touch screen displays interactive operation screens.
20 Control panel controls copier operations.
3
Punch Kit Details
Upper lever:
opens upward to allow
removal of mishandled
paper.
Punch Kit knob:
can be turned to ease
removal of mishandled
paper.
Left lever:
opens downward to
allow removal of
mishandled paper.
Finisher/Punch Kit
front door:
opens to remove mishandled
paper in Finisher or Punch
Kit, to change the staple
cartridge and to remove
paper punched out.
Right lever:
opens upward to allow
removal of mishandled
paper.
Trash basket:
holds waste paper punched
out.
4
2. Requirements for Safe Use
Site Requirements
5.9
(150)
44.0
(1117)
21.6
(550)
6.65
(169)
34.95
(887)
24.6
(626)
3.9
(100)
15.7
(400)
(1603)
47.4
(1203)
63.1
37.4
(950)
Unit: inches (mm)
30.5
(775)
4.7
(120)
111.4
(2829)
141.7
(3599)
30.3
(770)
72.6
(1845)
Di750 + FN-4 + PK-1 + TMG-1 + C-305L
NOTES:
1 Dimensions are in inches with millimeters included in parentheses.
2 The Finisher main tray of the FN-104/FN-4 Finisher gradually goes down while printed material is output.
DO NOT allow any object to interfere with the operation of the tray on the left side of the finisher, as any
interference may cause damage to the finisher.
Finisher Capacity Requirements
Primary (Main) tray: Punching mode (machine with PK-1 only)
3,000 sheets (8.5"x11")
1,500 sheets (11"x17")
5
Loading...