Konica Minolta DI152, DI183 User Manual

PRODUCT AND TECHNICAL SUPPORT DIVISION

Product

Information

Guide

Di152/Di183

Information contained in any literature published by Minolta Corporation concerning the expected life or yields of parts, supplies or other products mean
time between failures or any other service costs are and shall be deemed to be estimates only. Results in actual field experience may vary substantially
from such estimates. In no event shall such estimates be deemed or represented to be in any way a representation or warranty of Minolta Corporation.

7668-4021-25

Table of Contents

Di152/Di183 Specifications........................................................................................................................... 1

Reliability ...................................................................................................................................................... 3

Accessories .................................................................................................................................................. 3

Consumable Specifications ..........................................................................................................................3

System Options ............................................................................................................................................ 5

AF-10 (Automatic Document Feeder) Specifications .................................................................................. 6

PF-120 (Paper Feed Cabinet) Specifications ............................................................................................... 7

MB-5 (Multiple Bypass) Specifications ......................................................................................................... 8

JS-202 (Job Tray) Specifications.................................................................................................................. 9

OT-103 (Shifting Unit) Specifications ........................................................................................................... 9

DT-201 (Data Terminal) Specifications....................................................................................................... 10

Power Requirements .................................................................................................................................. 11

Installation Requirements ........................................................................................................................... 11

Precautions for use..................................................................................................................................... 11

Publications Price List ................................................................................................................................ 12

Service Training..........................................................................................................................................12

Warranty ..................................................................................................................................................... 12

Product Technical Support.......................................................................................................................... 12

ASTM

MSDS

i

COPIER / PRINTER SPECIFICATIONS Di152, Di183 AND OPTIONS

TYPE Console/Desktop Type

PLATEN stationary

ORIGINAL SCANNING SYSTEM CCD Line Sensor

COPYING SYSTEM Electrostatic Dry Powdered Image Transfer to Plain Paper

with a Laser

RESOLUTION 600 X 600 DPI

PAPER FEEDING SYSTEM 2-way system

Manual Bypass Single

Drawer 250 Sheets

EXPOSURE SYSTEM Mirror Scanning

CHARGING SYSTEM Comb Electrode (1) DC Negative Corona with Scorotron

System

IMAGE TRANSFER SYSTEM Roller Image Transfer

PAPER SEPARATING SYSTEM Paper Separator Fingers and Charge Neutralizing Plate

PAPER DISCHARGING SYSTEM Charge Neutralizing Brush

TYPES OF ORIGINALS Sheets, Books

MAX. ORIGINAL SIZE 11” X 17”

MAX. ORIGINAL WEIGHT

FIRST COPY SPEED 8½ X 11” C, 7 sec. or less (first draw, full size mode)

COPY SPEED Di152 Di183

8½” X 11” C 15 18

8½” X 11” L 12 14

11” X 17” 9 10

8½” X 14” L 10 12

MULTI-COPIES 1 to 99

PAPER TYPES Plain and Recycled Paper 16lb to 24 lb., Thick Paper

PAPER SIZE Max. (Width X Length) 11” X 17”

Min. (Width X Length) 3½” X 5½'

PAPER CAPACITY 1300 sheets and bypass

16lb to 24lb

24¼lb to 41½ lb., Transparencies, Postcard

1

COPIER / PRINTER SPECIFICATIONS Di152, Di183 AND OPTIONS

MAGNIFICATION REDUCTION RATIO

FIXED RATIOS (inches) Reduction 78%, 64%, 50%

Enlargement 200%, 129%, 121%

ZOOM RATIOS 50% to 200% (in 1% increments)

LENS Through Lens

VOID AREA Lead Edge

Trail Edge

Front Edge

Rear Edge

WARM UP TIME 30 sec. or less (23, Rated Voltage)

EXPOSURE CONTROL CCD Scanning

PHOTOCONDUCTOR Organic

DEVELOPING SYSTEM MT-HG System

FUSING SYSTEM Heat Roller

FUSING TEMPERATURE 180ºC/356ºF

POWER REQUIREMENTS 120V 50/60Hz

POWER CONSUMPTION Exposure Lamp 24V-14.4W

Heater Lamp 900W

Max. Consumption 1120W

ENVIRONMENTAL CONDITIONS Temperature 50 to 86ºF

Humidity 15 to 85% RH with a fluctuation

of 10% RH or less per hour

Ambient Lumination 3,000 lux or less

Levelness 1º

COPIER DIMENSIONS Width 23¼”

Depth 24”

Height 19¼”

COPIER WEIGHT 86lbs.

2

COPIER / PRINTER SPECIFICATIONS Di152, Di183 AND OPTIONS

RELIABILITY

Di152/152f Di183/183f

Suggested Monthly Volume 25,000 30,000

MCBF 25,000 30,000

Anticipated Monthly Volume 2,000 3,000

ACCESSORIES

Multiple Bypass MB-5

Cabinet PF-120

Job Tray JS-202

Shifting Unit OT-103

Automatic Document Feeder AD-10

Copy Desks Large

Small

Table

CONSUMABLE SPECIFICATIONS

STARTER

Item Number 8936-416

Contents of one unit 200gm

Unit Yield 40,000

Units per carton 1

Compatibility with other copiers None

TONER

Item number 8937-708

Replenishing Method Bottle

Contents of one unit 413gm

Unit yield 11,000

Units per case 2

Compatibility with other copiers None

3

COPIER / PRINTER SPECIFICATIONS Di152, Di183 AND OPTIONS

CONSUMABLE SPECIFICATIONS (Con’t)

PHOTOCONDUCTOR

Item number 4021-0291

Type OPC MCII

Yield 40,000

Compatibility with other copiers None

Disposal Household Waste

FUSING UNIT

Item Number 4021-0321-03

Yield 150,000

Units Per Carton 1

Compatibility Di152/Di183

TRANSFER ROLLER UNIT

Item Number 4021-0315-01

Yield 150,000

Units Per Carton 1

Compatibility Di152/Di183

PICKUP ROLLER

Item Number 4021-3012-01

Yield 150,000

Units Per Carton 1

Compatibility Di152/Di183

CLEANING BLADE

Item Number 4163-5602-02

Yield 40,000

Units Per Carton 1

Compatibility Di152/Di183

4

SYSTEM OPTIONS

5

COPIER / PRINTER SPECIFICATIONS Di152, Di183 AND OPTIONS

ACCESSORIES SPECIFICATIONS

AUTOMATIC DOCUMENT FEEDER

Model Name AF-10

Installation Inserted in top portion in the rear of copier

Original Size 5½ x 8½L, 8½ x 11L/C, 8½ x 14L, 11 x 15, 11 x 17

Original Weight Standard 13¼ to 29¼lbs.

Mixed Original 16 to 24lbs.

Feed Tray Capacity 50 sheets max 22 lbs.

Document Loading Face up

Document Alignment Center

Document Exchange 15 sheets/min. (letterC)

Speed 18 sheets/min. (letterC)

Compatibility N/A

Max Power Consumption 36W or less

Power Requirements DC24, DC5 (supplied from the copier)

Weight 12¼ lbs.

Dimensions Width 23¾”

Depth 19¾”

Height 4”

6

COPIER / PRINTER SPECIFICATIONS Di152, Di183 AND OPTIONS

PAPER FEED CABINET

Model Name PF-120

Installation Installs in the bottom of the Main Unit.

(Fixed to the Main Unit by plates and screws.)

Paper Sizes 8½ × 5-½C, 11 × 8½C, 8½ × 11L, 8 ½ × 14L, 11 × 14,

11 × 17
L: Lengthwise, C: Crosswise)

Registration Center

Capacity 250 sheets

Power Requirements DC24 V, DC5 V (supplied from copier)

Max. Power Consumption 9 W or less

Weight 12¼ lbs.

Compatibility N/A

Dimensions Width 23¼”

Depth 22”

Height 4¼”

7

COPIER / PRINTER SPECIFICATIONS Di152, Di183 AND OPTIONS

MULTIPLE BYPASS

Model Name MB-5

Installation Mounted on the copier

Copy Paper Types/Capacity Plain 16lb to 24lb 50 sheets

Transparencies 20 sheets

Thick 24¼lb to 41½ lb. 20 sheets

Postcards 20 sheets

Recycled 16lb to 24lb 50 sheets

Copy Paper Dimensions Max. (Width X Length) 11” X 17”

Min. (Width X Length) 3½” X 5½'

Copy Paper Size 11 x 17, 11 x 14, 8½ x 14, 8½ x 11L, 8½ x 11C, 8½ x 5½

Document Alignment Center

Capacity 50 sheet, 21¾lb

Power Requirements DC24V, DC5V (supplied from copier)

Max Power Consumption 9W or less

Dimensions Width 9¾”

Depth 17¼”

Height 5½”

Weight 6 lbs.

8

COPIER / PRINTER SPECIFICATIONS Di152, Di183 AND OPTIONS

JOB TRAY

Model Name JS-202

Installation Mounted on the copier

Capacity Plain Paper 16 to 24lb Exit Tray 150 sheets 8½ x 11C/L

75 sheets (except 8½ x 11C/L)

Job Tray Stacking height up to 7/8”

100 sheets 8½ x 11C/L
50 sheets (except 8½ x 11C/L)

Transparencies Exit Tray 20 sheets

Job Tray 10 sheets

Exit Tray Application
Mode

Thick Paper 24¼ to
41½lb

Post Cards Exit Tray 20 sheets

Recycled Paper 16 to
24lb

Fax and Copier Exit tray of the

Printer and Copier Exit tray of the

Fax, Copier and Printer Exit tray of the

Exit Tray 20 sheets

Job Tray 10 sheets

Job Tray 10 sheets

Exit Tray 150 sheets 8½ x 11C/L

75 sheets (except 8½ x 11C/L)

Job Tray Stacking height up to 7/8” 100

sheets 8½ x 11C/L
50 sheets (except 8½ x 11C/L)

Copier

machine

Job Tray Fax

Copier

machine

Job Tray Printer

Copier

machine

Job Tray Fax and Printer

Power Requirements DC24V, DC5V (supplied from the copier)

SHIFTING UNIT

Model Name OT-103

Installation Mounted on the copier

Power Requirements DC24V, DC5V (supplied from the copier)

9

COPIER / PRINTER SPECIFICATIONS Di152, Di183 AND OPTIONS

DATA TERMINAL

Model Name DT-201

Components Main control unit (CPU), clock, communications control

unit (modem), and power source

Interface Connected to the mechanical counter connector on the

copier

0RGXODUMDFNFKDQQHOSLQ5-&×

Compliance Approval Telecommunications Terminal Equipment compliance

approval

Operating Environment Same as copier

Power Requirements AC100 - 120 V

Current Consumption 150 mA (max.)

Dimensions Width 6”

Depth 2”

Height 7”

Weight 1-1/2 lb. (including harness)

Communications Specifications Redial Max. 10 times

Modem Specifications

Applicable lines Public phone lines, local area networks

Dialing system Tone dialing, pulse dialing (10 pps/20 pps)

Transmission method Half-duplex asynchronous transmission, conforming to

ITUT-V.21

Clock Specifications Battery Life 5 years

10

Power Requirements

Voltage: 120VAC/60Hz, 1500W, Single Phase, Grounded Outlet.
Outlet: For optimum performance the outlet should be a “Dedicated Line”.
The voltage between HOT and GROUND, should be 120VAC ± 7V
The voltage between NEUTRAL and GROUND, should be no more than 0.5V
The voltage between HOT and NEUTRAL, should be 120VAC

Voltage Fluctuation: ± 10%(Coping performance assured)

± 15% (Paper feeding performance assured)

Frequency Fluctuation 50/60 Hz ± 0.3%

Installation Requirements

To ensure safety and utmost performance from your Minolta copier, it should NOT be installed in an area:

1 Which is exposed to direct sunlight
2 Which is in the direct air current of an air conditioner, heater or ventilator.
3 Where it can be splashed with liquids
4 Which has poor ventilation.
5 Which does not have a level stable floor
6 Where the copier may be exposed to sudden fluctuations in temperature or humidity.
7 Where ammonia gas is generated.
8 Which is dirty or where it will receive undue vibration.

Precautions For Use

A.

1 Never place a heavy object on the copier, or subject the copier to shocks.
2 Insert the power plug all the way into the outlet.
3 Do not remove any covers or panels while the copier is making copies.
4 Do not turn OFF the power switch while the copier is making copies
5 Provide proper ventilation when making a large number of copies continuously.
6 Never use flammable sprays near the copier.
7 If the copier becomes inordinately hot or produces abnormal noise turn it OFF and unplug

it.
8 Do not bring magnetized objects near the copier.
9 Be sure to turn off the power switch at the end of the work day, or in case of a power fail-

ure.
10 Use care not to drop paper clips, staples, or other small pieces of metal into the copier.

B.

The Printhead of this copier uses laser diodes that emits laser beams. Use the following pre­cautions when servicing this area of the copier.

When service needs to be performed in the laser beam path, such as when working around
the printhead or PC drum, be sure to turn the copier OFF.

If the job requires that the power cord be left plugged in, observe the following precautions.

Take off your watch, rings, and any other reflective object and wear laser protective goggles.

At the job site, select a place that is as far as possible away from the users and is enclosed by
walls.

Do not bring highly reflective tools into the laser beam path.

11

Publications Price List

Di152/183 7669-4021-15

MODEL ITEM NUMBER DESCRIPTION DEALER COST

Di183 7665-4021-21 PARTS MANUAL $9.00
Di152 7665-4022-21 PARTS MANUAL $9.00
PF-120 7665-4686-21 PARTS MANUAL $9.00
MB-5 7665-4687-21 PARTS MANUAL $9.00
AF-10 7665-4688-21 PARTS MANUAL $9.00
Di152/Di183 7661-4021-11 GENERAL SERVICE MANUAL $10.00
Di152/Di183 7663-4688-11 OPTION SERVICE MANUAL $20.00
Di152/Di183 7662-4021-11 FIELD SERVICE MANUAL $20.00
Di152/Di183 7667-4021-13 RECOMMENDED TRUNK INVENTORY $0.50
Di152/Di183 7668-4021-25 PRODUCT INFORMATION GUIDE $20.00
Di152/Di183 7664-4021-02 OPERATOR MANUAL $10.00

A complimentary set of manuals will be shipped to all dealerships placing an initial order. This package will
be addressed “ATTN.: SERVICE MANAGER. Additional manuals can be purchased by calling the Minolta
Order Department at [phone] west coast dials 1 800-604-5588.

MANUAL KIT CONTAINS $125.50

Service Training

Certification Training Methods

Classroom Training None

Prior Product Training None

No Prior Product Training Minolta Analog Technicians

Introduction to Digital CBT part number 9005-9005-70

•

Facsimile Concepts (paper based) part number 9005-9005-65

•

Minolta Terminology Program II part number 8909-4887-07

•

Web Based Training

Introductory Module One

•

Theory Module two

•

Troubleshooting Module Three

•

On-Line Certification Testing

•

Warranty

Please refer to the Warranty and Special programs section of the Dealer Service Support Manual item
number 9005-9005-18 which is updated annually.

Product Technical Support

Please call 1 800 851-7619 between the hours of 9:00am and 5:00pm EST, Monday through Friday,
except Wednesday, 10:30a.m. to 5:00p.m.

12

ASTM DATA SHEET

MODEL: Di152

TEST SYSTEM

➀ Di152 OZONE EMISSIONS: 0.001 ppm
➁ MB-5

➂ PF-120 DECIBLE LEVELS: 24.5 db(A) Stand by
➃ AF-10 49.2 db(A) Copy Process
➄ OT-103

INPUT: 120V60Hz

Monthly volume, N(n*176) 2000
Number of copies, n, in test(from Table 1) 14
Copying time, Ct(from Table 2) 1.28 Min
Idle time, It<60Min-Ct> 58.72 Min
Number of Jobs, j, in test(from Table 1) 7

Single-sided Copies Duplexed Copies

Test Results(1-h test) Watt Hour B.T.U. Watt Hour B.T.U.

A Plug-in energy 0.30 1.02
B Warm-up plus standby energy 114.90 392.04
C Standby energy 102.20 348.71
D Energy-saver energy 25.50 87.01
E Copying energy plus standby 111.00 378.73

F Energy-saver delay time 0.35 Min

G Recovery energy plus energy-saver energy 30.70 104.75

Calculations, All Copiers

H Warm-up energy,Er<B-C> 12.70 43.33

I Copying energy,Ec<E-C> 8.80 30.03
J Recovery energy,Erc<G-D> 5.20 17.74

K Copying energy per copy,Ec/n 0.63 2.14

Ec/n*0.001 0.00063 0.00214

L Energy saver time per hour<It-j*F> 56.27 Min/Hr

M Fraction energy-saver time<L/60> 0.94

Calculations, Copiers Without Auto Shut-off

N Plug-in energy per standerd month<A*489>
O Warm-up plus standby energy per standard month<B*20>

P Energy-saver time per month<(M*176)+35-(5*F/60)>
Q Standby energy per standard month<C*(211-P)>
R Energy-saver energy per standerd month<D*P>

Calculations, Copiers With Auto Shut-off

S Plug-in energy per standerd month<A*519> 155.70 531.25
T Warm-up plus standby energy per standard month<B*22> 2527.80 8624.85
U Energy-saver time per month<(M*176)+3-(3*F/60)> 168.04 573.36
V Standby energy per standard month<C*(179-U)> 1119.99 3821.42

W Energy-saver energy per standerd month<D*U> 4285.05 14620.59

Calculations, All Copiers

X Machine energy per standard month-independent at volume

Em=(N+O+Q+R)or(S+T+V+W) 8088.54 27598.11

Y Total energy per month

Et=Em+(Ec/n+Erc)N 19745.69 67372.28

Z Avarage total energy per copy

Etavc=(Em+(Ec/n+Erc)N)/N 9.87 33.69

ASTM DATA SHEET

MODEL: Di152f

TEST SYSTEM

c Di152 OZONE EMISSIONS: 0.001 ppm
d MB-5

e PF-120 DECIBLE LEVELS: 24.5 db(A) Stand by
f AF-10 49.2 db(A) Copy Process
g OT-103
h Print Controller

INPUT: 120V60Hz

Monthly volume, N(n*176) 2000
Number of copies, n, in test(from Table 1) 14
Copying time, Ct(from Table 2) 1.28 Min
Idle time, It<60Min-Ct> 58.72 Min
Number of Jobs, j, in test(from Table 1) 7

Single-sided Copies Duplexed Copies

Test Results(1-h test) Watt Hour B.T.U. Watt Hour B.T.U.

A Plug-in energy 0.10 0.34
B Warm-up plus standby energy 135.80 463.35
C Standby energy 116.90 398.86
D Energy-saver energy 41.70 142.28
E Copying energy plus standby 130.60 445.61

F Energy-saver delay time 0.41 Min
G Recovery energy plus energy-saver energy 46.70 159.34

Calculations, All Copiers

H Warm-up energy,Er<B-C> 18.90 64.49

I Copying energy,Ec<E-C> 13.70 46.74
J Recovery energy,Erc<G-D> 5.00 17.06

K Copying energy per copy,Ec/n 0.98 3.34

Ec/n*0.001 0.00098 0.00334

L Energy saver time per hour<It-j*F> 55.85 Min/Hr

M Fraction energy-saver time<L/60> 0.93

Calculations, Copiers Without Auto Shut-off

N Plug-in energy per standerd month<A*489>
O Warm-up plus standby energy per standard month<B*20>

P Energy-saver time per month<(M*176)+35-(5*F/60)>
Q Standby energy per standard month<C*(211-P)>
R Energy-saver energy per standerd month<D*P>

Calculations, Copiers With Auto Shut-off

S Plug-in energy per standerd month<A*519> 51.90 177.08
T Warm-up plus standby energy per standard month<B*22> 2987.60 10193.69
U Energy-saver time per month<(M*176)+3-(3*F/60)> 166.81 569.14
V Standby energy per standard month<C*(179-U)> 1425.46 4863.67

W Energy-saver energy per standerd month<D*U> 6955.82 23733.25

Calculations, All Copiers

X Machine energy per standard month-independent at volume

Em=(N+O+Q+R)or(S+T+V+W) 11420.78 38967.69

Y Total energy per month

Et=Em+(Ec/n+Erc)N 23377.92 79765.46

Z Avarage total energy per copy

Etavc=(Em+(Ec/n+Erc)N)/N 11.69 39.88

ASTM DATA SHEET

MODEL: Di183

TEST SYSTEM

➀ Di183 OZONE EMISSIONS: 0.001 ppm
➁ MB-5

➂ PF-120 DECIBLE LEVELS: 24.5 db(A) Stand by
➃ AF-10 49.2 db(A) Copy Process
➄ OT-103

INPUT: 120V60Hz

Monthly volume, N(n*176) 3000
Number of copies, n, in test(from Table 1) 14
Copying time, Ct(from Table 2) 1.21 Min
Idle time, It<60Min-Ct> 58.79 Min
Number of Jobs, j, in test(from Table 1) 7

Single-sided Copies Duplexed Copies

Test Results(1-h test) Watt Hour B.T.U. Watt Hour B.T.U.

A Plug-in energy 0.50 1.71
B Warm-up plus standby energy 114.00 388.97
C Standby energy 107.10 365.43
D Energy-saver energy 25.90 88.37
E Copying energy plus standby 112.10 382.49

F Energy-saver delay time 0.35 Min
G Recovery energy plus energy-saver energy 32.00 109.18

Calculations, All Copiers

H Warm-up energy,Er<B-C> 6.90 23.54

I Copying energy,Ec<E-C> 5.00 17.06
J Recovery energy,Erc<G-D> 6.10 20.81

K Copying energy per copy,Ec/n 0.36 1.22

Ec/n*0.001 0.00036 0.00122

L Energy saver time per hour<It-j*F> 56.34 Min/Hr

M Fraction energy-saver time<L/60> 0.94

Calculations, Copiers Without Auto Shut-off

N Plug-in energy per standerd month<A*489>
O Warm-up plus standby energy per standard month<B*20>

P Energy-saver time per month<(M*176)+35-(5*F/60)>
Q Standby energy per standard month<C*(211-P)>
R Energy-saver energy per standerd month<D*P>

Calculations, Copiers With Auto Shut-off

S Plug-in energy per standerd month<A*519> 259.50 885.41
T Warm-up plus standby energy per standard month<B*22> 2508.00 8557.30
U Energy-saver time per month<(M*176)+3-(3*F/60)> 168.25 574.06
V Standby energy per standard month<C*(179-U)> 1151.70 3929.60

W Energy-saver energy per standerd month<D*U> 4357.58 14868.08

Calculations, All Copiers

X Machine energy per standard month-independent at volume

Em=(N+O+Q+R)or(S+T+V+W) 8276.78 28240.39

Y Total energy per month

Et=Em+(Ec/n+Erc)N 27648.21 94335.70

Z Avarage total energy per copy

Etavc=(Em+(Ec/n+Erc)N)/N 9.22 31.45

ASTM DATA SHEET

MODEL: Di183f

TEST SYSTEM

c Di183f OZONE EMISSIONS: 0.001 ppm
d MB-5

e PF-120 DECIBLE LEVELS: 24.5 db(A) Stand by
f AF-10 49.2 db(A) Copy Process
g OT-103
h Print Controller

INPUT: 120V60Hz

Monthly volume, N(n*176) 3000
Number of copies, n, in test(from Table 1) 14
Copying time, Ct(from Table 2) 1.21 Min
Idle time, It<60Min-Ct> 58.79 Min
Number of Jobs, j, in test(from Table 1) 7

Single-sided Copies Duplexed Copies

Test Results(1-h test) Watt Hour B.T.U. Watt Hour B.T.U.

A Plug-in energy 0.10 0.34
B Warm-up plus standby energy 135.80 463.35
C Standby energy 116.90 398.86
D Energy-saver energy 41.70 142.28
E Copying energy plus standby 130.60 445.61

F Energy-saver delay time 0.41 Min
G Recovery energy plus energy-saver energy 46.70 159.34

Calculations, All Copiers

H Warm-up energy,Er<B-C> 18.90 64.49

I Copying energy,Ec<E-C> 13.70 46.74
J Recovery energy,Erc<G-D> 5.00 17.06

K Copying energy per copy,Ec/n 0.98 3.34

Ec/n*0.001 0.00098 0.00334

L Energy saver time per hour<It-j*F> 55.92 Min/Hr

M Fraction energy-saver time<L/60> 0.93

Calculations, Copiers Without Auto Shut-off

N Plug-in energy per standerd month<A*489>
O Warm-up plus standby energy per standard month<B*20>

P Energy-saver time per month<(M*176)+35-(5*F/60)>
Q Standby energy per standard month<C*(211-P)>
R Energy-saver energy per standerd month<D*P>

Calculations, Copiers With Auto Shut-off

S Plug-in energy per standerd month<A*519> 51.90 177.08
T Warm-up plus standby energy per standard month<B*22> 2987.60 10193.69
U Energy-saver time per month<(M*176)+3-(3*F/60)> 167.01 569.84
V Standby energy per standard month<C*(179-U)> 1401.46 4781.77

W Energy-saver energy per standerd month<D*U> 6964.38 23762.46

Calculations, All Copiers

X Machine energy per standard month-independent at volume

Em=(N+O+Q+R)or(S+T+V+W) 11405.34 38915.00

Y Total energy per month

Et=Em+(Ec/n+Erc)N 29341.05 100111.66

Z Avarage total energy per copy

Etavc=(Em+(Ec/n+Erc)N)/N 9.78 33.37

MATERIAL SAFETY DATA SHEET

Page:1/6

Product Name: MT TONER 106[] MSDS No.:PPC-0763
Issue Date: 23 August 2001

1. PRODUCT AND COMPANY IDENTIFICATION

Product Name: MT TONER 106[] [],denoted with an alphabet.

used for: Di152, Di152f, Di183, Di183f

Supplier Identification:

Minolta Corporation
101 Williams Drive, Ramsey, New Jersey 07446, U.S.A.
Telephone: [phone]

Emergency Telephone No.

Contact your regional poison control center.

2. COMPOSITION / INFORMATION ON INGREDIENTS

Substance [ ] Preparation [ X ]
Hazardous Ingredients:

Chemical Name: Carbon black (5-10%)

CAS No.: 1333-86-4 EEC-No.: 215-609-9
OSHA Z-Tables(USA): 3.5mg/m3 ACGIH-TLV(USA): 3.5mg/m3
NTP(USA): Not listed IARC Monographs: Group 2B
Symbol(EC): Not listed R-Phrase(EC): Not listed
DFG-MAK(GER): III 3B Worksafe-TWA(Austl): 3mg/m3

Major Ingredients:

[Generic Name] [CAS No.] [%]
Polyester resin +++ 80-90
Carbon black 1333-86-4 5-10
Polyolefin wax +++ 1- 5
Magnetite 1317-61-9 1- 5
Titanium compound +++ 1- 5

+++: Supplier’s confidential information

MATERIAL SAFETY DATA SHEET

Page:2/6

Product Name: MT TONER 106[] MSDS No.:PPC-0763
Issue Date: 23 August 2001

3. HAZARDS IDENTIFICATION

Most Important Hazards and Effects of the Products

For Human Health: This toner is not classified as a human carcinogen.

No symptoms expected with intended use.

For the Environment: No data are available on the adverse effects of this

product on the environment.

For Others: None

Specific Hazards: Dust explosion(like most finely divided organic powders)

4. FIRST-AID MEASURES

Symptoms of Overexposure: No symptoms expected with intended use.
Routes of Entry: Eye contact, inhalation, ingestion
Information

Inhalation: If symptoms are experienced, remove source of contamination

or move victim to fresh air and obtain medical advice.

Skin Contact: Flush with gently flowing water (preferably lukewarm) and

soap for 15 minutes or until particle is removed. If irritation does
occur, obtain medical advice.

Eye Contact: Do not allow victim to rub eye(s). Flush with gently flowing

water (preferably lukewarm) for 15 minutes or until particle is removed.
Have victim look right and left, and, then up and down. If irritation
does occur, obtain medical attention. DO NOT attempt to manually remove
anything stuck to the eye(s).

Ingestion: If irritation or discomfort occurs, obtain medical attention

immediately.

Note to Physician: None

5. FIRE-FIGHTING MEASURES

Suitable Extinguishing Media: CO2, water spray, foam and dry chemical
Extinguishing Media to Avoid: Full water jet
Special Firefighting Procedures: None
Fire and Explosion Hazards: If dispersed in air, like most finely divided

organic powders, may form an explosive mixture.

Protection of Firefighters: Use self-contained breathing apparatus(SCBA).

6. ACCIDENTAL RELEASE MEASURES

Personal Precautions: None
Environmental Precautions: None
Methods for Cleaning Up: Wipe off with paper or cloth.

DO NOT use vacuum cleaner when a large amount is released. It, like most
finely divided organic powders, may create a dust explosion.

MATERIAL SAFETY DATA SHEET

Page:3/6

Product Name: MT TONER 106[] MSDS No.:PPC-0763
Issue Date: 23 August 2001

7. HANDLING AND STORAGE

Handling

Technical Measures/Precautions: None
Safe Handling Advice: Try not to disperse the particles.

Storage

Technical Measures: None
Storage Conditions: Keep container closed.
Store in a cool and dry place.

Keep out of reach of children
Incompatible Products: None
Packing Materials: Bottles or Cartridge designated by Minolta.

8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Engineering Measures

Ventilation: None required with intended use.

Control Parameters(As total dust)

OSHA-PEL(USA): 15mg/m3 ACGIH-TLV(USA): 10mg/m3
DFG-MAK(GER): 6mg/m3 Worksafe-TWA(Austl.): 10mg/m3

Personal Protective Equipment

None required when used as intended in Minolta equipment.
For use other than normal customer-operating procedures (such as in bulk
toner processing facilities), goggles and respirators may be required.

Hygiene Measures: Wash hands after handling.

9. PHYSICAL AND CHEMICAL PROPERTIES

Appearance

Physical State: Solid Form: Powder Color: Black
Odor: Faint odor
Particle Size(µm): 5 - 15
PH/Boiling Point(°C): Not applicable
Melting Point(°C): No data available
Softening Point(°C): 110 - 125 *
Flash Point(°C): Not applicable
Ignition Temperature(°C): > 400 *
Explosion Properties: No data available
Vapor Pressure: Not applicable
Density(g/cm³): 1.2 * (bulk density: 0.41 *)
Solubility in water: Negligible
Oxidizing Properties: No data available
Partition Coefficient, n-Octanol/Water: Not applicable

MATERIAL SAFETY DATA SHEET

Page:4/6

Product Name: MT TONER 106[] MSDS No.:PPC-0763
Issue Date: 23 August 2001

10. STABILITY AND REACTIVITY

Stability: Stable [ X ] Unstable [ ]
Hazardous Reactions: Dust explosion, like most finely divided organic

powders.
Conditions to avoid: Electric discharge, throwing into fire.
Materials to Avoid: Oxidizing materials.
Hazardous Decomposition Products: CO, CO2

11. TOXICOLOGICAL INFORMATION

Health Effects from Exposure: No symptoms expected with intended use.
Toxicological Data

Acute Toxicity:

Inhalation, LC50(mg/l): >1.93 (Rats,4hour) *
(This was the highest attainable concentration.)
Ingestion(oral), LD50(mg/kg): >2000 (Rats) *
Dermal, LD50(mg/kg): No data available
Eye irritation: Slight conjunctival irritation (Rabbits) *
Skin irritation: Non irritant (Rabbits) *
Skin sensitizer: Non sensitizer (Guinea pig) *

Mutagenicity:(AMES test) Negative *

(*= Based on data for other Minolta Products with similar ingredients)

Local Effects: see Chronic Toxicity or Long term Toxicity

Chronic Toxicity or Long Term Toxicity:

Prolonged inhalation of excessive dust may cause lung damage. It is
attributed to “lung overloading”, a generic response to excessive amounts
of any dust retained in the lungs for a prolonged interval. Use of this
product, as intended, does not result in inhalation of excessive dust.
In a study in rats by chronic inhalation exposure to a typical toner,
a mild to moderate degree of lung fibrosis was observed in 92% of rats
in the high concentration(16mg/m³) exposure group, and a minimal to mild
degree of fibrosis was noted in 22% of the animals in the middle(4mg/m³)
exposure group. But no pulmonary change was reported in the lowest(1mg/m³)
exposure group, the most relevant level to potential human exposures.

Carcinogenicity

IARC Monographs/NTP(USA)/OSHA Regulated(USA): Not listed

In 1996 the IARC reevaluated carbon black as a Group 2B carcinogen (possible
human carcinogen). This evaluation is given to Carbon Black for which
there is inadequate human evidence, but sufficient animal evidence. The
latter is based upon the development of lung tumors in rats receiving
chronic inhalation exposures to free carbon black at levels that induce

MATERIAL SAFETY DATA SHEET

Page:5/6

Product Name: MT TONER 106[] MSDS No.:PPC-0763
Issue Date: 23 August 2001

particle overload of the lung.
Studies performed in animal models other than rats have not demonstrated
an association between carbon black and lung tumors. Moreover, a two-year
cancer bioassay using a typical toner preparation containing carbon black
demonstrated no association between toner exposure and tumor development
in rats.

12. ECOLOGICAL INFORMATION

No data are available on the adverse effects of this material on the
environment.

13. DISPOSAL CONSIDERATION

Appropriate Methods of Disposal

Preparation(community provisions):

Waste may be disposed or incinerated under conditions which meet all
federal, state and local environmental regulations.

Contaminated Packaging:

Waste may be disposed or incinerated under conditions which meet all
federal, state and local environmental regulations.

Precautions:

Do not throw the toner cartridge or toner into an open flame. The hot
toner may scatter and cause burns or other damage.

14. TRANSPORT INFORMATION

Special Precautions: None
Information on Code and Classifications According to
International Regulations

UN Classification: None

15. REGULATORY INFORMATION

US Information

Information on the label: Not required
TSCA(Toxic Substances Control Act):

All chemical substances in this product comply with all applicable rules
or order under TSCA.

SARA(Superfund Amendments and Reauthorization Act) Title III

302 Extreme Hazardous Substance: None
311/312 Hazard Categories/313 Reportable Ingredients: None

California Proposition 65:

This product contains no chemical substances subject to California
Proposition 65.

MATERIAL SAFETY DATA SHEET

Page:6/6

Product Name: MT TONER 106[] MSDS No.:PPC-0763
Issue Date: 23 August 2001

EU Information

Information on the label (88/379/EEC and 67/548/EEC):

Symbol & Indication: Not required
R-Phrase: Not required
S-Phrase: Not required

76/769/EEC:

All chemical substances in this product comply with all applicable rules
or order under 76/769/EEC.

16. OTHER INFORMATION

NFPA Hazard Rating: The National Fire Protection Agency(USA):

Health: 1 Flammability: 1 Reactivity: 0

HMIS Rating: The National Paint and Coating Association(USA):

Health: 1 Flammability: 1 Reactivity: 0

Recommended Uses:

Toner for Electrophotographic Equipment

Restrictions:

Information on this data sheet represents our current data and the best
opinion as to the proper use in handling of this product under normal
conditions specified in our User‘s Manual. However, neither Minolta Co.,Ltd.
nor a ny of its subsidiaries assumes any liability whatsoever for the accuracy
or completeness of the information contained herein. All materials may
present unknown hazards and should be used with caution. Although certain
hazards are described herein, we do not guarantee that these are the only
hazards which exist.

Literature References:

ANSI Z400.1-1993
ISO 11014-1
Commission Directive 91/155/EEC

IARC(1996): IARC monographs on the Evaluation of the Carcinogenic Risk of

Chemicals to Humans, Vol. 65, Printing Process and Printing
Inks, Carbon Black and Some Nitro Compounds, Lyon, pp.149-261

H.Muhle, B.Bellmann, O.Creutzenberg, C.Dasenbrock, H.Ernst, R.Kilpper,
J.C.MacKenzie, P.Morrow, U.Mohr, S.Takenaka, and R.Mermelstein(1991)
Pulmonary Response to Toner upon Chronic Inhalation Exposure in Rats.
Fundamental and Applied Toxicology 17, pp.280-299.

MATERIAL SAFETY DATA SHEET

Page:1/6

Product Name: MT STARTER 106 MSDS No.:PPC-1723
Issue Date: 23 August 2001

1. PRODUCT AND COMPANY IDENTIFICATION

Product Name: MT STARTER 106

used for: Di152, Di152f, Di183, Di183f

Supplier Identification:

Minolta Corporation
101 Williams Drive, Ramsey, New Jersey 07446, U.S.A.
Telephone: [phone]

Emergency Telephone No.

Contact your regional poison control center.

2. COMPOSITION / INFORMATION ON INGREDIENTS

Substance [ ] Preparation [ X ]
Hazardous Ingredients:

Chemical Name: Carbon black (1- 5%)

CAS No.: 1333-86-4 EEC-No.: 215-609-9
OSHA Z-Tables(USA): 3.5mg/m3 ACGIH-TLV(USA): 3.5mg/m3
NTP(USA): Not listed IARC Monographs: Group 2B
Symbol(EC): Not listed R-Phrase(EC): Not listed
DFG-MAK(GER): III 3B Worksafe-TWA(Austl): 3mg/m3

Major Ingredients:

[Generic Name] [CAS No.] [%]
Magnetite 1317-61-9 60-70
Polyester resin +++ 10-20
Polyester resin +++ 10-20
Styrene acrylate copolymer +++ 1- 5
Carbon black 1333-86-4 1- 5

+++: Supplier’s confidential information

MATERIAL SAFETY DATA SHEET

Page:2/6

Product Name: MT STARTER 106 MSDS No.:PPC-1723
Issue Date: 23 August 2001

3. HAZARDS IDENTIFICATION

Most Important Hazards and Effects of the Products

For Human Health: This starter is not classified as a human carcinogen.

No symptoms expected with intended use.

For the Environment: No data are available on the adverse effects of this

product on the environment.

For Others: None

Specific Hazards: Dust explosion(like most finely divided organic powders)

4. FIRST-AID MEASURES

Symptoms of Overexposure: No symptoms expected with intended use.
Routes of Entry: Eye contact, inhalation, ingestion
Information

Inhalation: If symptoms are experienced, remove source of contamination

or move victim to fresh air and obtain medical advice.

Skin Contact: Flush with gently flowing water (preferably lukewarm) and

soap for 15 minutes or until particle is removed. If irritation does
occur, obtain medical advice.

Eye Contact: Do not allow victim to rub eye(s). Flush with gently flowing

water (preferably lukewarm) for 15 minutes or until particle is removed.
Have victim look right and left, and, then up and down. If irritation
does occur, obtain medical attention. DO NOT attempt to manually remove
anything stuck to the eye(s).

Ingestion: If irritation or discomfort occurs, obtain medical attention

immediately.

Note to Physician: None

5. FIRE-FIGHTING MEASURES

Suitable Extinguishing Media: CO2, water spray, foam and dry chemical
Extinguishing Media to Avoid: Full water jet
Special Firefighting Procedures: None
Fire and Explosion Hazards: If dispersed in air, like most finely divided

organic powders, may form an explosive mixture.

Protection of Firefighters: Use self-contained breathing apparatus(SCBA).

6. ACCIDENTAL RELEASE MEASURES

Personal Precautions: None
Environmental Precautions: None
Methods for Cleaning Up: Wipe off with paper or cloth.

DO NOT use vacuum cleaner when a large amount is released. It, like most
finely divided organic powders, may create a dust explosion.

MATERIAL SAFETY DATA SHEET

Page:3/6

Product Name: MT STARTER 106 MSDS No.:PPC-1723
Issue Date: 23 August 2001

7. HANDLING AND STORAGE

Handling

Technical Measures/Precautions: None
Safe Handling Advice: Try not to disperse the particles.

Storage

Technical Measures: None
Storage Conditions: Keep container closed.
Store in a cool and dry place.

Keep out of reach of children
Incompatible Products: None
Packing Materials: Bottles or Cartridge designated by Minolta.

8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Engineering Measures

Ventilation: None required with intended use.

Control Parameters(As total dust)

OSHA-PEL(USA): 15mg/m3 ACGIH-TLV(USA): 10mg/m3
DFG-MAK(GER): 6mg/m3 Worksafe-TWA(Austl.): 10mg/m3

Personal Protective Equipment

None required when used as intended in Minolta equipment.
For use other than normal customer-operating procedures (such as in bulk
toner processing facilities), goggles and respirators may be required.

Hygiene Measures: Wash hands after handling.

9. PHYSICAL AND CHEMICAL PROPERTIES

Appearance

Physical State: Solid Form: Powder Color: Black
Odor: Faint odor
Particle Size(µm): 5 - 15(toner) about 30 (carrier)
PH/Boiling Point(°C): Not applicable
Melting Point(°C): No data available
Softening Point(°C): 110 - 125 *
Flash Point(°C): Not applicable
Ignition Temperature(°C): > 400 *
Explosion Properties: No data available
Vapor Pressure: Not applicable
Density(g/cm³): 4 (bulk density: about 1.3)
Solubility in water: Negligible
Oxidizing Properties: No data available
Partition Coefficient, n-Octanol/Water: Not applicable

MATERIAL SAFETY DATA SHEET

Page:4/6

Product Name: MT STARTER 106 MSDS No.:PPC-1723
Issue Date: 23 August 2001

10. STABILITY AND REACTIVITY

Stability: Stable [ X ] Unstable [ ]
Hazardous Reactions: Dust explosion, like most finely divided organic

powders.
Conditions to avoid: Electric discharge, throwing into fire.
Materials to Avoid: Oxidizing materials.
Hazardous Decomposition Products: CO, CO2

11. TOXICOLOGICAL INFORMATION

Health Effects from Exposure: No symptoms expected with intended use.
Toxicological Data

Acute Toxicity:

Inhalation, LC50(mg/l): No data available
Ingestion(oral), LD50(mg/kg): >2000 (Rats) *
Dermal, LD50(mg/kg): No data available
Eye irritation: Slight conjunctival irritation (Rabbits) *
Skin irritation: Non irritant (Rabbits) *
Skin sensitizer: Non sensitizer (Guinea pig) *

Mutagenicity:(AMES test) Negative *

(*= Based on data for other Minolta Products with similar ingredients)

Local Effects: see Chronic Toxicity or Long term Toxicity

Chronic Toxicity or Long Term Toxicity:

Prolonged inhalation of excessive dust may cause lung damage. It is
attributed to “lung overloading”, a generic response to excessive amounts
of any dust retained in the lungs for a prolonged interval. Use of this
product, as intended, does not result in inhalation of excessive dust.
In a study in rats by chronic inhalation exposure to a typical toner,
a mild to moderate degree of lung fibrosis was observed in 92% of rats
in the high concentration(16mg/m³) exposure group, and a minimal to mild
degree of fibrosis was noted in 22% of the animals in the middle(4mg/m³)
exposure group. But no pulmonary change was reported in the lowest(1mg/m³)
exposure group, the most relevant level to potential human exposures.

Carcinogenicity

IARC Monographs/NTP(USA)/OSHA Regulated(USA): Not listed

In 1996 the IARC reevaluated carbon black as a Group 2B carcinogen (possible
human carcinogen). This evaluation is given to Carbon Black for which
there is inadequate human evidence, but sufficient animal evidence. The
latter is based upon the development of lung tumors in rats receiving
chronic inhalation exposures to free carbon black at levels that induce
particle overload of the lung.

MATERIAL SAFETY DATA SHEET

Page:5/6

Product Name: MT STARTER 106 MSDS No.:PPC-1723
Issue Date: 23 August 2001

Studies performed in animal models other than rats have not demonstrated
an association between carbon black and lung tumors. Moreover, a two-year
cancer bioassay using a typical toner preparation containing carbon black
demonstrated no association between toner exposure and tumor development
in rats.

12. ECOLOGICAL INFORMATION

No data are available on the adverse effects of this material on the
environment.

13. DISPOSAL CONSIDERATION

Appropriate Methods of Disposal

Preparation(community provisions):

Waste may be disposed or incinerated under conditions which meet all
federal, state and local environmental regulations.

Contaminated Packaging:

Waste may be disposed or incinerated under conditions which meet all
federal, state and local environmental regulations.

Precautions:

Do not throw the toner cartridge or toner into an open flame. The hot
toner may scatter and cause burns or other damage.

14. TRANSPORT INFORMATION

Special Precautions: None
Information on Code and Classifications According to
International Regulations

UN Classification: None

15. REGULATORY INFORMATION

US Information

Information on the label: Not required
TSCA(Toxic Substances Control Act):

All chemical substances in this product comply with all applicable rules
or order under TSCA.

SARA(Superfund Amendments and Reauthorization Act) Title III

302 Extreme Hazardous Substance: None
311/312 Hazard Categories/313 Reportable Ingredients: None

California Proposition 65:

This product contains no chemical substances subject to California
Proposition 65.

MATERIAL SAFETY DATA SHEET

Page:6/6

Product Name: MT STARTER 106 MSDS No.:PPC-1723
Issue Date: 23 August 2001

EU Information

Information on the label (88/379/EEC and 67/548/EEC):

Symbol & Indication: Not required
R-Phrase: Not required
S-Phrase: Not required

76/769/EEC:

All chemical substances in this product comply with all applicable rules
or order under 76/769/EEC.

16. OTHER INFORMATION

NFPA Hazard Rating: The National Fire Protection Agency(USA):

Health: 1 Flammability: 1 Reactivity: 0

HMIS Rating: The National Paint and Coating Association(USA):

Health: 1 Flammability: 1 Reactivity: 0

Recommended Uses:

Starter for Electrophotographic Equipment

Restrictions:

Information on this data sheet represents our current data and the best
opinion as to the proper use in handling of this product under normal
conditions specified in our User‘s Manual. However, neither Minolta Co.,Ltd.
nor a ny of its subsidiaries assumes any liability whatsoever for the accuracy
or completeness of the information contained herein. All materials may
present unknown hazards and should be used with caution. Although certain
hazards are described herein, we do not guarantee that these are the only
hazards which exist.

Literature References:

ANSI Z400.1-1993
ISO 11014-1
Commission Directive 91/155/EEC

IARC(1996): IARC monographs on the Evaluation of the Carcinogenic Risk of

Chemicals to Humans, Vol. 65, Printing Process and Printing
Inks, Carbon Black and Some Nitro Compounds, Lyon, pp.149-261

H.Muhle, B.Bellmann, O.Creutzenberg, C.Dasenbrock, H.Ernst, R.Kilpper,
J.C.MacKenzie, P.Morrow, U.Mohr, S.Takenaka, and R.Mermelstein(1991)
Pulmonary Response to Toner upon Chronic Inhalation Exposure in Rats.
Fundamental and Applied Toxicology 17, pp.280-299.

MATERIAL SAFETY DATA SHEET

Page:1/5

Products Name: PHOTOCONDUCTOR 106 MSDS No.: DPO-0343
Issue Date: 23 August 2001

1. PRODUCT AND COMPANY IDENTIFICATION

Product Name: PHOTOCONDUCTOR 106

used for: Di152, Di152f, Di183, Di183f

Supplier Identification:

Minolta Corporation
101 Williams Drive, Ramsey, New Jersey 07446, U.S.A.
Telephone: [phone]

Emergency Telephone No.

Contact your regional poison control center.

2. COMPOSITION / INFORMATION ON INGREDIENTS

Hazardous Ingredients:

None present

Major Ingredients:

[Generic Name] [CAS No.] [%]

Substrate >95

Aluminum drum 7429-90-5

Coating layer <5

Polycarbonate +++
Organic photosensitive material +++
Organic pigment +++

+++: Supplier’s confidential information

MATERIAL SAFETY DATA SHEET

Page:2/5

Products Name: PHOTOCONDUCTOR 106 MSDS No.: DPO-0343
Issue Date: 23 August 2001

3. HAZARDS IDENTIFICATION

Most Important Hazards and Effects of the Products

For Human Health: No symptoms expected with intended use.
For the Environment: No data are available on the adverse effects of this

product on the environment.

For Others: None

Specific Hazards: None

4. FIRST-AID MEASURES

Symptoms of Overexposure: No symptoms expected with intended use.
Routes of Entry: None

Information

Inhalation: No treatment is required.
Skin Contact: No treatment is required.
Eye Contact: No treatment is required.
Ingestion: No treatment is required.

Note to Physician: None

5. FIRE-FIGHTING MEASURES

Suitable Extinguishing Media: CO2, water, foam and dry chemical
Extinguishing Media to Avoid: None
Special Firefighting Procedures: None
Fire and Explosion Hazards: This material has no unusual fire or

explosive hazards.

Protection of Firefighters: No special equipment is required.

6. ACCIDENTAL RELEASE MEASURES

Personal Precautions: Not applicable with intended use.
Environmental Precautions: Not applicable with intended use.
Methods for Cleaning Up: Not applicable with intended use.

7. HANDLING AND STORAGE

Handling

Technical Measures: None
Precautions: This product will be scorched in the case of fire.
Safe Handling Advice: None.

Storage

Technical Measures: None
Storage Conditions: Keep and Store in a cool and dry place.
Incompatible Products: None
Packing Materials: Cardboard box designated by Minolta.

MATERIAL SAFETY DATA SHEET

Page:3/5

Products Name: PHOTOCONDUCTOR 106 MSDS No.: DPO-0343
Issue Date: 23 August 2001

8. EXPOSURE CONTROLS / PERSONAL PROTECTION

Engineering Measures

Ventilation: None required with intended use.

Control Parameters

OSHA-PEL(USA): Not Applicable ACGIH-TLV(USA): Not Applicable
DFG-MAK(EC): Not Applicable Worksafe-TWA(Austl): Not Applicable

Personal Protective Equipment

None required when used as intended in Minolta equipment.

Hygiene Measures: Wash hands after handling.

9. PHYSICAL AND CHEMICAL PROPERTIES

Appearance

Physical State: Solid Form: Cylinder Color: Green

Odor: Odorless
<<Results of the coated compounds on the aluminum substrate.>>

Boiling Point: Not applicable
Melting/Softening Point: Not applicable
Flash Point: Not applicable
pH: Not applicable
Explosion Properties: Not applicable
Density(g/cm³): 1.2(coating).(2.7 as a whole)
Solubility in water: insoluble
Flammability: Not applicable
Oxidizing Properties: No data available
Ignition Temperature(°C): Not applicable
Vapor Pressure: Not applicable
Partition Coefficient, n-Octanol/Water: Not applicable

10. STABILITY AND REACTIVITY

Stability: Stable [ X ] Unstable [ ]
Hazardous Reactions: None
Conditions to avoid: None
Materials to Avoid: None
Hazardous Decomposition Products: CO, CO2

MATERIAL SAFETY DATA SHEET

Page:4/5

Products Name: PHOTOCONDUCTOR 106 MSDS No.: DPO-0343
Issue Date: 23 August 2001

11. TOXICOLOGICAL INFORMATION

Health Effects from Exposure: No symptoms expected with intended use.
Toxicological Data

<<Result of the OPC compound on the aluminum substrate.>>

Acute Toxicity:

Inhalation, LC50(mg/l): Not applicable
Ingestion(oral), LD50(mg/kg): > 5000 (rat) (Rats)
Dermal, LD50(mg/kg): Not applicable
Eye irritation: No data available
Skin irritation: None irritant (rabbit) (Rabbits)
Skin sensitizer: No data available

Mutagenicity: Negative (AMES test)

Local Effects: No data available
Chronic Toxicity or Long Term Toxicity: None
Carcinogenicity

IARC Monographs: Not listed
NTP(USA): Not listed
OSHA Regulated(USA): Not listed

12. ECOLOGICAL INFORMATION

No data are available on the adverse effects of this material on the

environment.

13. DISPOSAL CONSIDERATION

Appropriate Methods of Disposal

Waste may be disposed or incinerated under conditions which meet all
federal, state and local environmental regulations.

14. TRANSPORT INFORMATION

Special Precautions: None
Information on Code and Classifications According to
International Regulations

UN Classification: None

MATERIAL SAFETY DATA SHEET

Page:5/5

Products Name: PHOTOCONDUCTOR 106 MSDS No.: DPO-0343
Issue Date: 23 August 2001

15. REGULATORY INFORMATION

US Information

Information on the label: Not required
SARA(Superfund Amendments and Reauthorization Act) Title III

302 Extreme Hazardous Substance: None
311/312 Hazard Categories: None
313 Reportable Ingredients: None

California Proposition 65:

This product contains no chemical substances subject to California
Proposition 65.

EU Information

Information on the label(88/379/EEC and 67/548/EEC):

Symbol & Indication: Not required
R-Phrase: Not required
S-Phrase: Not required

16. OTHER INFORMATION

NFPA Hazard Rating: The National Fire Protection Agency(USA):

Health: 0 Flammability: 1 Reactivity: 0

HMIS RATING: The National Paint and Coating Association(USA):

Health: 0 Flammability: 1 Reactivity: 0

Recommended Uses:

Photoconductor for Electrophotographic Equipment

Restrictions:

Information on this data sheet represents our current data and the best
opinion as to the proper use in handling of this product under normal
conditions specified in our User‘s Manual. However, neither Minolta Co.,
Ltd. nor any of its subsidiaries assumes any liability whatsoever for
the accuracy or completeness of the information contained herein. All
materials may present unknown hazards and should be used with caution.
Although certain hazards are described herein, we do not guarantee that
these are the only hazards which exist.

Literature References:

ANSI Z400.1-1993
ISO 11014-1
Commission Directive 91/155/EEC