Konica Minolta DF-320 User Manual
PARTS CATALOG
Model
DF-320
MARCH 2004
KONICA MINOLTA BUSINESS SOLUTIONS U.S.A., INC.
HOW TO USE THIS CATALOG
This parts catalog includes illustrations and part numbers for all replacement parts and assemblies used in this model.
Model-specific parts are identified in the illustrations with reference numbers. Use the reference number to locate the corresponding part number on the facing page.
Common hardware items, such as screws, nuts, washers, and pins, are identified in the illustrations with reference letters. Use the reference letter to locate the corresponding part number on the hardware listing in the lower right hand corner of the facing page.
If you know a part number, but don’t know where the part is used, use the numerical index to determine the page number and reference number for that part. Because some common parts are used in several places, there may be more than one entry. Refer to the illustrations to see where the part may be used.
If you know a part’s description, but don’t know where to look to find the part number, use the alphabetical index to determine likely page and reference numbers. Then look at the illustrations to determine that you have identified the correct part. Locate the part number using the listing on the opposite page.
Retail pricing that appears with the numerical index, while valid when this catalog was printed, is subject to change without notice. The prices are only suggested prices and are provided only for reference. Dealers may determine their own selling prices. For up-to-date pricing, refer to current Konica price lists or contact the Konica Parts Distribution Center.
How to order parts
Use standard Konica parts ordering procedures to obtain these parts. For ordering options, contact Konica’s Parts Distribution Center.
When ordering parts, be sure to specify part numbers exactly as listed in this catalog.
NOTE: Electrical parts may include previously used components.
Model DF-320 |
Konica Minolta Business Solutions U.S.A., Inc. |
Page iii |
1st Edition |
March, 2004 |
This page left blank intentionally.
Page iv |
Konica Minolta Business Solutions U.S.A., Inc. |
Model DF-320 |
March, 2004 |
1st Edition |
CONTENTS
How to Use This Catalog . . . . . . . . . . . . . . . . . . . . . . . . |
iii |
|
Contents |
. . . . . . . . . . . . . . . . . . . . . . . . . . . . |
1 |
Housing |
. . . . . . . . . . . . . . . . . . . . . . . . . . . . |
2 |
Rollers/Guide |
. . . . . . . . . . . . . . . . . . . . . . . . . . . . |
4 |
Paper Feed Section . . . . . . . . . . . . . . . . . . . . . . . . . . . |
6 |
|
Paper Transfer Section . . . . . . . . . . . . . . . . . . . . . . . . . |
8 |
|
Paper Exit Section . . . . . . . . . . . . . . . . . . . . . . . . . . . |
10 |
|
Open/Close Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . |
14 |
|
Paper Feed Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
16 |
|
Wiring |
. . . . . . . . . . . . . . . . . . . . . . . . . . . . |
18 |
Alphabetical Index . . . . . . . . . . . . . . . . . . . . . . . . . . . |
21 |
|
Numerical Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
23 |
|
Model DF-320 |
Konica Minolta Business Solutions U.S.A., Inc. |
Page 1 |
1st Edition |
March, 2004 |
HOUSING
Page 2 |
Konica Minolta Business Solutions U.S.A., Inc. |
Model DF-320 |
March, 2004 |
1st Edition |
REF. |
PART NUMBER |
DESCRIPTION |
NO. |
|
|
1 |
14GA12031 |
Front cover |
2 |
13GL15050 |
Pulley holder/A |
3 |
13GL45600 |
Positioning stopper/front |
4 |
13GL46160 |
Lock catch |
5 |
14QH10110 |
Hinge/L |
6 |
13GL46030 |
Original cover hinge |
7 |
13GL46710 |
Hinge plate |
8 |
13GL10191 |
Hinge mount plate/R |
9 |
14GA12020 |
Rear cover |
1014GA46970 Solenoid set part/A
1114QH-4800 Original exit tray assembly
12 |
14QH46100 |
Lock spring |
13 |
14GA46080 |
Lock lever/A |
14 |
13GL10320 |
Hinge stopper |
15 |
14QH-1660 |
Hinge/R assembly |
16 |
14QH-9010 |
RADF control unit |
17 |
14QH10250 |
Hold spring/B |
18 |
14GA90040 |
RADF wiring/4 |
19 |
14QH10200 |
Hinge upper plate/R |
HARDWARE
REF. |
PART |
LTR. |
NUMBER |
|
|
a |
00Z184061 |
c |
00Z254101 |
d |
00Z670306 |
e |
00Z925103 |
f |
00Z670406 |
g |
00Z193041 |
h |
00Z920034 |
i |
00Z926251 |
j |
00Z183042 |
k |
00Z193062 |
m |
00Z253081 |
|
|
Model DF-320 |
Konica Minolta Business Solutions U.S.A., Inc. |
Page 3 |
1st Edition |
March, 2004 |
ROLLERS/GUIDES
Page 4 |
Konica Minolta Business Solutions U.S.A., Inc. |
Model DF-320 |
March, 2004 |
1st Edition |
REF. PART NUMBER |
DESCRIPTION |
NO.
113GL45151 Driving release roller/A
213GL15240 Reversal shaft holder
3 |
56AA17320 |
Pin/A |
4 |
13GL76590 |
Conveyance driving pulley/D (Z=42) |
5 |
13GL40500 |
Slide sheet/A |
6466076020 Paper feeding shaft holder
714QH45840 Toque rotary spring
814QH77550 Driving reverse belt (L=60/96)
913GL76600 Conveyance driving pulley/E (Z=17)
1013GL76610 Conveyance driving pulley/F (Z=17)
11 |
13GL40350 |
Connecting collar |
12 |
14QH40340 |
Toque limiter/B |
13 |
14QH-4050 |
Double feed preventive roller/A assembly |
14 |
14QH10300 |
Rotary spring |
15 |
13GL40050 |
Double feed preventive plate |
16 |
13QA85510 |
Sensor/1 |
1714QH45590 Electrify preventive sheet
1814QH46660 Paper exit detecting plate
19 |
13GL40380 |
Stopper part/A |
2014QH-4040 Double feed preventive roller assembly
2114GA-1531 Solenoid/A assembly
2214QH-4010 Paper feed guide plate/lower assembly
2313GL45210 Driving release lever/1
2413GL40550 Conveyance auxiliary sheet
25 |
08AA85510 |
Photosensor |
26 |
14QH46690 |
Neutralizing brush |
27 |
14QH45200 |
Pressure spring |
28 |
13GL45190 |
Pressure part |
29 |
14QH40240 |
Double feed preventive spring |
HARDWARE
|
REF. |
PART |
|
LTR. |
NUMBER |
|
|
|
|
a |
00Z194081 |
|
b |
00Z926251 |
|
c |
00Z193041 |
|
d |
00Z921930 |
|
e |
00Z193061 |
|
f |
00Z670406 |
|
g |
00Z921943 |
|
h |
00Z670306 |
|
i |
00Z113061 |
|
|
|
|
|
|
Model DF-320 |
Konica Minolta Business Solutions U.S.A., Inc. |
Page 5 |
1st Edition |
March, 2004 |
Loading...