Konica Minolta CF9001, FIERY Z5 FOR CF9001, FIERY Z5 /CF9001 User Manual

User Addendum

Fiery Z5 software version 1.02

What’s new in version 1.02

This document is intended to supplement the documentation that came with your Fiery Z4 software version 1.0. It describes new features and updates information for

software version 1.02. For all other information and instructions for your Fiery Z5, use the documentation that accompanied your Fiery Z4 software version 1.0. Before using the Fiery Z5, please read this addendum and distribute it to all users.

The Fiery Z5 server has a new back panel configuration. This affects the connection of the Token Ring option. Refer to the following section for enabling the Token Ring connection on the Fiery Z5.

Connecting Token Ring hardware

The service/support center that installs the Fiery Z5 typically also installs the Token Ring option at the same time and configures the Fiery Z5 to enable printing.

Back view of the Fiery Z5 with the Token Ring option installed

Token Ring connectors

!Turn off the Fiery Z5 before connecting it to any network device.

NOTE: Do not attach cable to both Token Ring connectors.

2001 Electronics For Imaging, Inc.

Part number: 45023973

Page 2

FCC and CE Marking compliance information

The following compliance information described in the beginning of each user manual has been updated for the Fiery Z5:

FCC Declaration of Conformity

Trade Name:	Fiery Server
Model Number:	Fiery Z5 CF9001 (ZXP-02)
Compliance Test Report Number:	M10524A1
Compliance Test Report Date:	June 7, 2001
Responsible Party (in USA):	Electronics for Imaging, Inc.
Address:	303 Velocity Way, Foster City, CA 94404
Telephone:	[phone]

	CE Marking (Declaration of Conformity)
	We declare under our sole responsibility that the copier and options to which this
	declaration relates are in conformity with the specifications below. This declaration is valid
	for the area of the European Union (EU) only.
Product Type	Console Copier System
System Product	CF9100 + Fiery Z5 CF9001 (ZXP-02), CF9100 Options: AFR-12, ST-103, S-105, C-101, AD-7,
Name	I/F KIT H, ADF KIT
Compliance	M10531C1
Report Number
Standards	Safety *2 : EN 60 950/1992 (A1, A2, A3, A4 & A11)
	(Safety of information technology equipment, including electrical business equipment)
	EN 60825-1 / 1994 with A11 (Copier only)
	(Radiation safety of laser products, equipment classification, requirements, and user’s guide)
	EMC *1 : EN55 022 (Class B)/1998 (Limits and method for measurement of radio disturbance character-
	istics of information technology equipment (ITE))
	EN61000-3-2/1995 (Electromagnetic compatibility (EMC)- Part 3: Limits, Section 2: Limits for harmonic
	current emissions (equipment input current ≤ 16A per phase))
	EN61000-3-3/1995 (Electromagnetic compatibility (EMC)- Part 3: Limits, Section 2: Limitation of voltage
	fluctuations and flicker in low-voltage supply systems for equipment with rated current ≤ 16A
	EN55024/1998 (Information technology equipment — immunity characteristics — Limits and methods of
	measurement
	EN61000-4-2/1995 : Electrostatic discharge immunity test
	EN61000-4-3/1995 : Radiated electromagnetic field immunity test
	EN61000-4-4/1995 : Electrical fast transient/burst immunity test
	EN61000-4-5/1995 : Surge immunity test
	EN61000-4-6/1996 : Immunity to conducted disturbance, induced by radio-frequency field
	EN61000-4-8/1993 : Power-frequency magnetic field immunity test
	EN61000-4-11: Voltage dips, short interruptions and voltage variations immunity test
	Notes: *1) EMC performance: This product was designed for operation in a typical office environment.
	*2) First year of labeling according to EC-directive 73/23/EEC and 93/68/EEC: 2000
	3) This product was designed for operation in a typical office environment.
EC Directives	Safety: 73/23/EEC and 93/68/EEC;	EMC: 89/336/EEC and 93/68/EEC