Konica Minolta C252P User Manual

Download

User Manual

C252P

Contents

1 Introduction

1.1 Energy Star®..................................................................................... 1-4

What is an Energy Star® product? ................................................ 1-4

1.2 Trademarks and registered trademarks......................................... 1-5

License information........................................................................ 1-5

OpenSSL Statement ...................................................................... 1-6

1.3 Software licence agreement............................................................ 1-9

1.4 Explanation of manual conventions.............................................. 1-11

Safety advices.............................................................................. 1-11

Sequence of action ...................................................................... 1-11

Tips .............................................................................................. 1-12

Special text markings................................................................... 1-12

2 Installation and operation precautions

2.1 Safety information ............................................................................ 2-3

Warning and precaution symbols .................................................. 2-3

Meaning of Symbols ...................................................................... 2-4

Disassemble and modification....................................................... 2-4

Power cord..................................................................................... 2-5

Power source ................................................................................. 2-6

Power plug..................................................................................... 2-7

Grounding ...................................................................................... 2-7

Installation...................................................................................... 2-8

Ventilation ...................................................................................... 2-9

Actions in response to troubles ..................................................... 2-9

Consumables ............................................................................... 2-10

When moving the machine .......................................................... 2-11

Before successive holidays.......................................................... 2-11

2.2 Regulation notices.......................................................................... 2-12

CE Marking (Declaration of conformity) for users of the

European Union (EU).................................................................... 2-12

USER INSTRUCTIONS FCC PART 15 - RADIO FREQUENCY

DEVICES (for U.S.A. users).......................................................... 2-12

INTERFERENCE-CAUSING EQUIPMENT STANDARD

(ICES-003 ISSUE 4) (for Canada users)....................................... 2-13

For users in countries not subject to class B regulations............ 2-13

Laser safety.................................................................................. 2-14

CDRH regulations ........................................................................ 2-15

bizhub C252P Contents-1

For European users....................................................................... 2-16

For Denmark users ....................................................................... 2-16

For Finland, Sweden users ........................................................... 2-16

For Norway users.......................................................................... 2-17

Laser safety label.......................................................................... 2-18

Ozone release ............................................................................... 2-19

Acoustic noise (for European users only) ..................................... 2-19

For EU member states only .......................................................... 2-19

2.3 Caution notations and labels.......................................................... 2-20

2.4 Space requirements ........................................................................ 2-21

2.5 Operation precautions .................................................................... 2-22

Power source................................................................................ 2-22

Operating environment ................................................................. 2-22

Storage of printed pages .............................................................. 2-22

2.6 Part names and their functions...................................................... 2-23

Options ......................................................................................... 2-23

Outside of machine....................................................................... 2-26

Inside of machine.......................................................................... 2-32

Finisher FS-603/Punch kit PK-501 ............................................... 2-34

Finisher FS-501/Job separator JS-601 ........................................ 2-36

Saddle stitcher SD-503/Mailbin kit MT-501 ................................. 2-38

Finisher FS-514/Output tray OT-601/Punch kit PK-510............... 2-39

Control panel ................................................................................ 2-42

2.7 Basic operations.............................................................................. 2-43

Turning on the machine ................................................................ 2-43

Turning off the machine ................................................................ 2-44

Automatically canceling the settings (automatic panel reset)....... 2-45

Automatically conserving energy (Low Power mode)................... 2-45

Automatically conserving energy (Sleep mode)............................ 2-46

Power supply ................................................................................ 2-46

2.8 Connecting to a computer.............................................................. 2-47

Compatible interfaces................................................................... 2-47

Connection diagram ..................................................................... 2-48

Contents-2 bizhub C252P

3 Setting up the printer driver

3.1 About the provided printer drivers.................................................. 3-3

Printer drivers and supported operating systems.......................... 3-3

System requirements ..................................................................... 3-4

Setting up the system .................................................................... 3-5

3.2 Installing the printer driver .............................................................. 3-6

When used with Windows.............................................................. 3-6

Installing the printer driver using the Add Printer Wizard .............. 3-8

For Windows XP/Server 2003........................................................ 3-8

For Windows 98SE/Me/2000/NT 4.0 ........................................... 3-10

Installing the printer driver using Plug and Play........................... 3-12

For Windows 98SE....................................................................... 3-12

For Windows Me/2000................................................................. 3-13

For Windows XP/Server 2003...................................................... 3-15

Uninstalling the printer driver....................................................... 3-17

When used with Macintosh.......................................................... 3-19

Installing the printer driver ........................................................... 3-20

For Mac OS X............................................................................... 3-20

Selecting a printer........................................................................ 3-21

For Mac OS X............................................................................... 3-21

For Mac OS 9.2............................................................................ 3-23

Uninstalling the printer driver....................................................... 3-24

For Mac OS X............................................................................... 3-24

For Mac OS 9.2............................................................................ 3-25

3.3 Printing operations......................................................................... 3-26

For Windows ................................................................................ 3-26

Printing operation......................................................................... 3-26

Test printing ................................................................................. 3-27

For Macintosh .............................................................................. 3-28

Printing operation......................................................................... 3-28

3.4 Setting up network printing........................................................... 3-29

Overview of network functions .................................................... 3-29

Network functions........................................................................ 3-29

Features of the network functions ............................................... 3-30

Network connection methods that can be selected in each

Windows operating system.......................................................... 3-32

Specifying the TCP/IP settings .................................................... 3-35

Accessing PageScope Web Connection..................................... 3-38

SMB printing ................................................................................ 3-39

Operations on this machine......................................................... 3-39

Printer driver settings (For Windows 98SE/Me) ........................... 3-41

Printer driver settings (For Windows 2000/XP/Server 2003)........ 3-41

LPR printing ................................................................................. 3-42

Operations on this machine......................................................... 3-42

bizhub C252P Contents-3

Printer driver settings (For Windows 2000/XP/Server 2003) ........ 3-42

Printer driver settings (For Windows NT 4.0)................................ 3-43

Port 9100 printing (Windows 98SE/Me/2000/XP/Server 2003) .... 3-44

Operations on this machine.......................................................... 3-44

Printer driver settings (Windows 2000/XP/server 2003) ............... 3-45

Installing the Peer to Peer Printing Tool to connect using

Port 9100 (Windows 98SE/Me)..................................................... 3-46

Printer driver settings when the Peer to Peer Printing Tool is

installed to connect using Port 9100 (Windows 98SE/Me)........... 3-47

IPP printing (Windows 2000/XP/Server 2003) .............................. 3-48

Operations on this machine.......................................................... 3-48

Installing the printer driver ............................................................ 3-50

Printing with NetWare................................................................... 3-52

For remote printer mode with NetWare 4.x Bindery Emulation .... 3-52

For print server mode with NetWare 4.x Bindery Emulation......... 3-55

For NetWare 4.x remote printer mode (NDS)................................ 3-58

For NetWare 4.x/5.x/6 Print Server mode (NDS) .......................... 3-60

For NetWare 5.x/6 Novell Distributed Print Services (NDPS) ....... 3-62

Specifying client (Windows) settings when using the

NetWare server ............................................................................. 3-63

Printing with Macintosh ................................................................ 3-64

Operations on this machine.......................................................... 3-64

Specifying the AppleTalk settings ................................................ 3-64

Specifying the Bonjour settings.................................................... 3-66

Specifying Macintosh settings...................................................... 3-68

For Mac OS X ............................................................................... 3-68

For Mac OS 9.2............................................................................. 3-69

4 Specifying printer driver settings

4.1 Specifying the printer driver basic settings .................................... 4-3

For Windows................................................................................... 4-3

To display the printer driver setup dialog box................................ 4-4

For Macintosh................................................................................. 4-5

4.2 Setting up the PCL driver.................................................................. 4-6

Selecting the printer........................................................................ 4-6

Settings........................................................................................... 4-7

Common settings............................................................................ 4-7

Specifying the Setup tab settings................................................. 4-11

Printing to suit the paper size ....................................................... 4-11

Specifying a custom size .............................................................. 4-13

Selecting the paper source........................................................... 4-15

Assigning a paper type to a paper tray......................................... 4-16

Specifying Double-sided/Booklet printing.................................... 4-18

Printing multiple pages on one page (N in 1)................................ 4-19

Setting the file margin................................................................... 4-20

Contents-4 bizhub C252P

Stapling ........................................................................................ 4-21

Hole punching.............................................................................. 4-21

Fold & staple ................................................................................ 4-22

Selecting the output method ....................................................... 4-23

Specifying Account Track settings .............................................. 4-26

Specifying the Per Page Setting tab settings .............................. 4-28

Printing documents with a front cover/back cover...................... 4-28

Printing multiple pages ................................................................ 4-29

Chapter ........................................................................................ 4-29

Per Page setting........................................................................... 4-30

Specifying the Overlay tab settings ............................................. 4-31

Printing different original documents together (Overlay) ............. 4-31

Editing forms................................................................................ 4-33

Specifying the Watermark tab settings........................................ 4-35

Printing a watermark.................................................................... 4-35

Editing a watermark ..................................................................... 4-36

Printing the document number .................................................... 4-37

Copy protect ................................................................................ 4-38

Specifying the Quality tab settings .............................................. 4-40

Specifying settings....................................................................... 4-41

Specifying the Font tab settings .................................................. 4-42

Replacing fonts ............................................................................ 4-42

Specifying the Option tab settings............................................... 4-43

Selecting options ......................................................................... 4-44

Saving the driver settings............................................................. 4-46

To save the driver settings........................................................... 4-46

Viewing the settings..................................................................... 4-48

Deleting the settings .................................................................... 4-48

4.3 Setting up the PostScript driver (Windows) ................................. 4-49

Selecting the printer..................................................................... 4-49

Settings ........................................................................................ 4-51

Common settings......................................................................... 4-51

Specifying the Setup tab settings................................................ 4-57

Printing to suit the paper size ...................................................... 4-57

Saving a custom sizes ................................................................. 4-59

Selecting the output method ....................................................... 4-60

Specifying Account Track settings .............................................. 4-64

Specifying the Layout tab settings............................................... 4-66

Printing multiple pages on one page (N in 1)............................... 4-67

Double-sided printing .................................................................. 4-68

Setting the file margin .................................................................. 4-68

Stapling ........................................................................................ 4-69

Fold & Staple................................................................................ 4-70

Hole punching.............................................................................. 4-71

Specifying the Per Page Setting tab settings .............................. 4-72

Printing documents with a front cover/back cover...................... 4-72

bizhub C252P Contents-5

Specifying the Watermark tab settings......................................... 4-73

Printing a watermark..................................................................... 4-73

Editing a watermark...................................................................... 4-74

Specifying the Quality tab settings ............................................... 4-76

Specifying settings........................................................................ 4-77

Font settings ................................................................................. 4-78

Specifying the Option tab settings ............................................... 4-79

Specifying settings........................................................................ 4-80

Saving the driver settings ............................................................. 4-82

To save the driver settings............................................................ 4-82

Viewing the settings...................................................................... 4-84

Changing the settings................................................................... 4-84

4.4 Setting up the PPD driver (Windows) ............................................ 4-85

Settings......................................................................................... 4-85

Specifying the Paper tab settings................................................. 4-89

Specifying settings........................................................................ 4-89

Specifying the Device Options tab settings.................................. 4-90

Specifying settings........................................................................ 4-90

Specifying the options .................................................................. 4-92

To select an option ....................................................................... 4-92

4.5 Setting up the PPD driver (Mac OS 9.2)......................................... 4-94

Settings......................................................................................... 4-94

Page Setup dialog box ................................................................. 4-94

Print dialog box............................................................................. 4-96

Page setup.................................................................................... 4-99

Basic settings (Page Attributes).................................................... 4-99

Custom Page Sizes..................................................................... 4-101

PostScript Options...................................................................... 4-102

Printing........................................................................................ 4-103

Basic settings (General) .............................................................. 4-103

Printing multiple pages on one page (Layout) ............................ 4-105

Printer-specific options (Finishing Options 1 to 4)...................... 4-106

Setting options............................................................................ 4-109

Specifying settings...................................................................... 4-109

4.6 Setting up the PPD driver (Mac OS X) ......................................... 4-111

Settings....................................................................................... 4-111

Page Setup dialog box ............................................................... 4-111

Print dialog box........................................................................... 4-113

Page setup.................................................................................. 4-117

Basic settings (Page Attributes).................................................. 4-117

Custom Paper Size ..................................................................... 4-119

Printing........................................................................................ 4-120

Basic settings (Copies & Pages)................................................. 4-120

Printing multiple pages on one page (Layout) ............................ 4-122

Paper Feed ................................................................................. 4-123

Contents-6 bizhub C252P

Security ...................................................................................... 4-124

Finishing..................................................................................... 4-127

Quality ........................................................................................ 4-129

Setup.......................................................................................... 4-131

Setting options........................................................................... 4-132

Specifying settings..................................................................... 4-132

Saving the driver settings........................................................... 4-134

To save the driver settings......................................................... 4-134

Viewing the settings................................................................... 4-135

Changing the settings................................................................ 4-135

5 Control panel settings

5.1 Control panel..................................................................................... 5-3

Available keys ................................................................................ 5-3

Basic operations ............................................................................ 5-4

Basic menu operations .................................................................. 5-4

Sleep mode.................................................................................... 5-6

Administrator password................................................................. 5-8

5.2 Overview of utility mode parameters............................................ 5-10

Settings menu list......................................................................... 5-10

5.3 Parameters...................................................................................... 5-32

Job Operation .............................................................................. 5-32

Paper Tray.................................................................................... 5-33

User Setting ................................................................................. 5-34

Admin. Setting.............................................................................. 5-40

Enhanced Security....................................................................... 5-47

Password Rules ........................................................................... 5-49

HDD Setting ................................................................................. 5-50

HDD Password............................................................................. 5-50

HDD Formatting ........................................................................... 5-50

Overwrite All................................................................................. 5-51

Overwrite Temp............................................................................ 5-51

O.W. Priority................................................................................. 5-52

Encryption Key............................................................................. 5-53

Banner Printing ............................................................................ 5-54

bizhub C252P Contents-7

6 Loading copy paper

6.1 Paper .................................................................................................. 6-3

Possible paper sizes....................................................................... 6-3

Paper types and paper capacities.................................................. 6-5

Special paper.................................................................................. 6-6

Precautions for paper ..................................................................... 6-8

Paper storage ................................................................................. 6-8

Print area......................................................................................... 6-9

Auto tray switch feature.................................................................. 6-9

Order for selecting the paper trays............................................... 6-10

6.2 Loading copy paper ........................................................................ 6-11

Loading paper into the Tray 1....................................................... 6-11

To load paper (Tray 1)................................................................... 6-11

Loading paper into Tray 2, 3, or 4 ................................................ 6-16

To load paper (Tray 2, 3, or 4)....................................................... 6-16

Loading paper into the LCT.......................................................... 6-19

To load paper (LCT) ...................................................................... 6-19

Loading paper into the bypass tray.............................................. 6-22

To load paper (bypass tray) .......................................................... 6-22

6.3 Specifying finishing settings .......................................................... 6-28

Stapling prints (Staple settings).................................................... 6-28

Punching holes in prints (Punch settings)..................................... 6-31

Specifying center binding ............................................................. 6-32

7 Replacing consumables

7.1 Replacing the toner cartridge .......................................................... 7-3

To replace the toner cartridge ........................................................ 7-5

7.2 Replacing the staples........................................................................ 7-8

To replace the staple cartridge for Finisher FS-501 ....................... 7-8

To replace the staple cartridge for Finisher FS-603 ..................... 7-11

To replace the staple cartridge in the Finisher FS-514................. 7-15

To replace the staple cartridge in saddle stitcher......................... 7-17

7.3 Replacing the waste toner box ...................................................... 7-20

To replace the waste toner box.................................................... 7-21

Contents-8 bizhub C252P

8 Maintenance

8.1 Cleaning............................................................................................. 8-3

Housing.......................................................................................... 8-3

Control panel.................................................................................. 8-3

Paper take-up roller ....................................................................... 8-4

Electrostatic charger wire .............................................................. 8-5

Print head....................................................................................... 8-6

Emptying the waste containers...................................................... 8-7

To empty the hole-punch waste container in Finisher

FS-603 ........................................................................................... 8-8

To empty the hole-punch waste container in Finisher

FS-514 ........................................................................................... 8-9

8.2 When the message “Preventive Maintenance Time”

appears............................................................................................ 8-10

9 Troubleshooting

9.1 When the message “Trouble” appears

(call technical representative) ......................................................... 9-3

To call the technical representative ............................................... 9-3

9.2 When the message “Paper Misfeed at” appears........................... 9-4

Paper misfeed indications.............................................................. 9-5

To clear a paper misfeed in the bypass tray.................................. 9-7

To clear a paper misfeed in the automatic duplex unit.................. 9-8

To clear a paper misfeed in the Tray 1 .......................................... 9-9

To clear a paper misfeed in the Tray 2 ........................................ 9-10

To clear a paper misfeed in a paper tray (Tray 3 or 4) ................. 9-11

To clear a paper misfeed in the LCT............................................ 9-12

To clear a paper misfeed in the right-side door........................... 9-13

To clear a paper misfeed in the fusing unit.................................. 9-16

To clear a banner paper misfeed ................................................. 9-20

To clear a paper misfeed in Finisher FS-501 ............................... 9-24

To clear a paper misfeed in Finisher FS-603 ............................... 9-28

To clear a paper misfeed in the Finisher FS-514 ......................... 9-32

To clear a paper misfeed in the mailbin....................................... 9-35

To clear a paper misfeed in the saddle stitcher........................... 9-37

9.3 When the message “Replenish paper” appears.......................... 9-39

To replenish paper ....................................................................... 9-39

9.4 Clearing a staple jam...................................................................... 9-40

To clear jammed staples in Finisher FS-501................................ 9-40

To clear jammed staples in Finisher FS-603................................ 9-42

To clear jammed staples in the Finisher FS-514.......................... 9-47

To clear jammed staples in the saddle stitcher ........................... 9-51

bizhub C252P Contents-9

9.5 When “near life limit” appears........................................................ 9-54

9.6 Simple troubleshooting................................................................... 9-55

Main unit ....................................................................................... 9-55

Finisher ......................................................................................... 9-56

Printer driver ................................................................................. 9-57

9.7 Main messages and their remedies............................................... 9-60

10 Additional settings

10.1 Using PageScope Web Connection............................................... 10-3

System Requirements................................................................... 10-3

Accessing PageScope Web Connection...................................... 10-3

Page Structure.............................................................................. 10-4

Cache Function of Web Browsers................................................ 10-6

On Internet Explorer...................................................................... 10-6

On Netscape Navigator ................................................................ 10-6

Logging In to the Administrator Mode.......................................... 10-7

User mode .................................................................................. 10-10

System tab.................................................................................. 10-11

Job tab........................................................................................ 10-12

Box tab ....................................................................................... 10-12

Print tab ...................................................................................... 10-13

Administrator mode .................................................................... 10-14

Basic operation........................................................................... 10-14

System tab.................................................................................. 10-15

Job tab........................................................................................ 10-16

Box tab ....................................................................................... 10-16

Print tab ...................................................................................... 10-17

Network tab ................................................................................ 10-18

10.2 Box operations............................................................................... 10-20

Available parameters .................................................................. 10-20

Opening Boxes ........................................................................... 10-21

To open a box............................................................................. 10-23

Checking Box Information .......................................................... 10-24

Changing the Box Settings......................................................... 10-26

Deleting a Box............................................................................. 10-28

Creating Boxes ........................................................................... 10-29

10.3 Managing print jobs ...................................................................... 10-31

Specifying job operations ........................................................... 10-31

Storing jobs................................................................................. 10-33

Recalling a job ............................................................................ 10-33

Printing when account track settings have been specified ........ 10-37

Setting procedure (for Windows)................................................ 10-38

Setting procedure (for Mac OS X)............................................... 10-39

Job operations in PageScope Web Connection......................... 10-40

Contents-10 bizhub C252P

10.4 Printing on Banner Paper............................................................. 10-41

Paper.......................................................................................... 10-41

Paper types................................................................................ 10-41

Printer Drivers and Supported Operating Systems ................... 10-41

Specifying Printer Driver Settings .............................................. 10-42

To specify printer driver settings................................................ 10-42

Printing....................................................................................... 10-43

To print....................................................................................... 10-43

11 Appendix

11.1 Specifications ................................................................................. 11-3

bizhub C252P............................................................................... 11-3

Automatic Duplex Unit ................................................................. 11-5

Option specifications ................................................................... 11-6

Paper Feed Cabinet PC-103........................................................ 11-6

Paper Feed Cabinet PC-203........................................................ 11-6

Paper Feed Cabinet PC-403........................................................ 11-6

Finisher FS-603............................................................................ 11-7

Punch Kit PK-501......................................................................... 11-8

Finisher FS-514............................................................................ 11-9

Punch kit PK-510 ....................................................................... 11-10

Saddle stitcher SD-503.............................................................. 11-10

Output tray OT-601.................................................................... 11-10

Mailbin kit MT-501 ..................................................................... 11-11

Finisher FS-501.......................................................................... 11-12

Job Separator JS-601................................................................ 11-13

11.2 Configuration page....................................................................... 11-14

11.3 Font list .......................................................................................... 11-15

PCL font list................................................................................ 11-15

PS font list.................................................................................. 11-16

11.4 Test page....................................................................................... 11-17

11.5 Glossary......................................................................................... 11-18

Glossary ..................................................................................... 11-18

11.6 Index .............................................................................................. 11-23

bizhub C252P Contents-11

Contents-12 bizhub C252P

Introduction

1 Introduction

Thank you for choosing this machine.

This manual contains details on the operation of the various functions of the machine, precautions on its use, and basic troubleshooting procedures. In order to ensure that this machine is used correctly and efficiently, carefully read this manual before using the machine. After reading the manual, store it in the designated holder so that it can easily be referred to when questions or problems arise during operation.

The illustrations used in this manual may appear slightly different from views of the actual equipment.

bizhub C252P 1-3

1.1 Energy Star®

As an Energy Star® Partner, we have determined that this machine meets the Energy Star® Guidelines for energy efficiency.

What is an Energy Star® product?

An Energy Star® product has a special feature that allows it to automatically switch to a "low-power mode" after a period of inactivity. An Energy Star® product uses energy more efficiently, saves you money on utility bills and helps protect the environment.

Introduction

1-4 bizhub C252P

Introduction

1.2 Trademarks and registered trademarks

KONICA MINOLTA, KONICA MINOLTA Logo, and The essentials of imaging are registered trademarks or trademarks of KONICA MINOLTA HOLDINGS, INC.

PageScope and bizhub are registered trademarks or trademarks of KONICA MINOLTA BUSINESS TECHNOLOGIES, INC.

Netscape Communications, the Netscape Communications logo, Netscape Navigator, Netscape Communicator, and Netscape are trademarks of Netscape Communications Corporation.

This machine is based in part on the work of the Independent JPEG Group.

RC4® is a registered trademark or trademark of RSA Security Inc. in the United States and/or other countries.

RSA® is a registered trademark or trademark of RSA Security Inc. RSA BSAFE® is a registered trademark or trademark of RSA Security Inc. in the United States and/or other countries.

License information

This product includes RSA BSAFE Cryptographic software from RSA Security Inc.

bizhub C252P 1-5

Introduction

OpenSSL Statement

OpenSSL License

Copyright © 1998-2000 The OpenSSL Project. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

3. All advertising materials mentioning features or use of this software must display the following acknowledgment: "This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)"

4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to endorse or promote products derived from this software without prior written permission. For written permission, please contact opensslcore@openssl.org.

5. Products derived from this software may not be called "OpenSSL" nor may "OpenSSL" appear in their names without prior written permission of the OpenSSL Project.

6. Redistributions of any form whatsoever must retain the following acknowledgment: "This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/)"

THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT "AS IS" AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

This product includes cryptographic software written by Eric Young (eay@crypt-Soft.com). This product includes software written by Tim Hudson (tjh@cryptsoft.com).

1-6 bizhub C252P

Introduction

Original SSLeay License

Copyright © 1995-1998 Eric Young (eay@cryptsoft.com) All rights reserved. This package is an SSL implementation written by Eric Young (eay@cryptsoft.com). The implementation was written so as to conform with Netscapes SSL. This library is free for commercial and non-commercial use as long as the following conditions are aheared to. The following conditions apply to all code found in this distribution, be it the RC4, RSA, Ihash, DES, etc., code; not just the SSL code. The SSL documentation included with this distribution is covered by the same copyright terms except that the holder is Tim Hudson (tjh@cryptsoft.com). Copyright remains Eric Young’s, and as such any Copyright notices in the code are not to be removed. If this package is used in a product, Eric Young should be given attribution as the author of the parts of the library used. This can be in the form of a textual message at program startup or in documentation (online or textual) provided with the package. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the copyright notice, this list

2. Redistributions in binary form must reproduce the above copyright

3. All advertising materials mentioning features or use of this software must

4. If you include any Windows specific code (or a derivative thereof) from

THIS SOFTWARE IS PROVIDED BY ERIC YOUNG "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT

of conditions and the following disclaimer.

notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

display the following acknowledgement: "This product includes cryptographic software written by Eric Young (eay@crypt-soft.com)" The word ‘cryptographic’ can be left out if the rouines from the library being used are not cryptographic related.

the apps directory (application code) you must include an acknowledgement: "This product includes software written by Tin Hudson (tjh@cryptsoft.com)"

bizhub C252P 1-7

Introduction

(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

The licence and distribution terms for any publically available version or derivative of this code cannot be changed. i.e. this code cannot simply be copied and put under another distribution licence [including the GNU Public Licence.]

All other product names mentioned are trademarks or registered trademarks of their respective companies

1-8 bizhub C252P

Introduction

1.3 Software licence agreement

This package contains the following materials provided by Konica Minolta Business Technologies, Inc. (KMBT): software included as part of the printing system, the digitally-encoded machine-readable outline data encoded in the special format and in the encrypted form ("Font Programs"), other software which runs on a computer system for use in conjunction with the Printing Software ("Host Software"), and related explanatory written materials ("Documentation"). The term "Software" shall be used to describe Printing Software, Font Programs and/or Host Software and also include any upgrades, modified versions, additions, and copies of the Software.

The Software is being licensed to you under the terms of this Agreement.

KMBT grants to you a non-exclusive sublicense to use the Software and Documentation, provided that you agree to the following:

1. You may use the Printing Software and accompanying Font Programs for imaging to the licensed output de-vice(s), solely for your own internal business purposes.

2. In addition to the license for Font Programs set forth in Section 1 ("Printing Software") above, you may use Roman Font Programs to reproduce weights, styles, and versions of letters, numerals, characters and symbols ("Typefaces") on the display or monitor for your own internal business purposes.

3. You may make one backup copy of the Host Software, provided your backup copy is not installed or used on any computer. Notwithstanding the above restrictions, you may install the on any number of computers solely for use with one or more printing systems running the Printing Software.

4. You may assign its rights under this Agreement to an assignee of all of Licensee’s right and interest to such Software and Documentation ("Assignee") provided you transfer to Assignee all copies of such Software and Documentation Assignee agrees to be bound by all of the terms and conditions of this Agreement.

5. You agree not to modify, adapt or translate the Software and Documentation.

6. You agree that you will not attempt to alter, disassemble, decrypt, reverse engineer or decompile the Software.

7. Title to and ownership of the Software and Documentation and any reproductions thereof shall remain with KMBT and its licensor.

8. Trademarks shall be used in accordance with accepted trademark practice, including identification of the trademark owner’s name. Trademarks can only be used to identify printed output produced by the Software. Such use of any trademark does not give you any rights of ownership in that trademark.

bizhub C252P 1-9

Introduction

9. You may not rent, lease, sublicense, lend or transfer versions or copies of the Software Licensee does not use, or Software contained on any unused media, except as part of the permanent transfer of all Software and Documentation as described above.

10. IN NO EVENT WILL KMBT OR ITS LICENSOR BE LIABLE TO YOU FOR ANY CONSEQUENTIAL, INCIDENTAL INDIRECT, PUNITIVE OR SPECIAL DAMAGES, INCLUDING ANY LOST PROFITS OR LOST SAVING, EVEN IF KMBT HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, OR FOR ANY CLAIM BY ANY THIRD PARTY. KMBT OR ITS LICENSOR DISCLAIMS ALL WARRANTIES WITH REGARD TO THE SOFTWARE, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE AND NON-INFRINGEMENT OF THIRD PARTY RIGHTS. SOME STATES OR JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTIAL, CONSEQUENTIAL OR SPECIAL DAMAGES, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.

11. Notice to Government End Users: The Software is a "commercial item," as that term is defined at 48 C.F.R.2.101, consisting of "commercial computer software" and "commercial computer software documentation," as such terms are used in 48 C.F.R. 12.212. Consistent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.7202-4, all U.S. Government End Users acquire the Software with only those rights set forth herein.

12. You agree that you will not export the Software in any form in violation of any applicable laws and regulations regarding export control of any countries.

1-10 bizhub C252P

Introduction

1.4 Explanation of manual conventions

The marks and text formats used in this manual are described below.

Safety advices

6 DANGER

Failure to observe instructions highlighted in this manner may result in fatal or critical injuries in fact of electrical power.

% Observe all dangers in order to prevent injuries.

7 WARNING

Failure to observe instructions highlighted in this manner may result in serious injuries or property damage.

% Observe all warnings in order to prevent injuries and to ensure safe use

of the machine.

7 CAUTION

Failure to observe instructions highlighted in this manner may result in slight injuries or property damage.

% Observe all cautions in order to prevent injuries and to ensure safe use

of the machine.

Sequence of action

1 The number 1 as formatted here

indicates the first step of a sequence of actions.

An illustration inserted

2 Subsequent numbers as formatted

here indicate subsequent steps of a sequence of actions.

Text formatted in this style

provides additional assistance.

% Text formatted in this style describes the action that will ensure the

desired results are achieved.

bizhub C252P 1-11

here shows what operations

must be performed.

Introduction

Tips

Note

Text highlighted in this manner contains useful information and tips to ensure safe use of the machine.

Reminder

Text highlighted in this manner contains information that should be reminded.

Detail

Text highlighted in this manner contains references for more detailed information.

Special text markings

[Stop] key The names of keys on the control panel are written as shown above.

MACHINE SETTING

Display texts are written as shown above.

1-12 bizhub C252P

Installation and operation precautions

2 Installation and operation precautions

2.1 Safety information

This section contains detailed instructions on the operation and maintenance of this machine. To achieve optimum utility of this device, all operators should carefully read and follow the instructions in this manual.

Please read the following section before connecting the machine to the supply. It contains important information related to user safety and preventing equipment problems.

Please keep this manual in a handy place near the machine.

Make sure you observe all of the precautions appear in each section of this manual.

KM_Ver.01E_C

Note

Some parts of the contents of this section may not correspond with the purchased product.

Warning and precaution symbols

The following indicators are used on the warning labels or in this manual to categorize the level of safety warnings.

7 WARNING

Ignoring this warnings could cause serious injury or even death.

% Do not ignore this safety advices.

7 CAUTION

Ignoring this cautions could cause injury or damage to property.

% Do not ignore this safety advices.

bizhub C252P 2-3

Installation and operation precautions

Meaning of Symbols

Symbol Meaning Example Meaning

A triangle indicates a danger against which you should take precaution.

A diagonal line indicates a prohibited course of action.

This symbol warns against possible causes of burns.

This symbol warns against dismantling the device.

A solid circle indicates an imperative course of action.

This symbol indicates you must unplug the device.

Disassemble and modification

7 WARNING

Ignoring this warnings could cause serious injury or even death.

% Do not ignore this safety advices.

Warning Symbol

• Do not attempt to remove the covers and panels which have been fixed to the product. Some products have a high-voltage part or a laser beam source inside that could cause an electrical shock or blindness.

• Do not modify this product, as a fire, electrical shock, or breakdown could result. If the product employs a laser, the laser beam source could cause blindness.

2-4 bizhub C252P

Installation and operation precautions

Power cord

7 WARNING

Ignoring this warnings could cause serious injury or even death.

% Do not ignore this safety advices.

Warning Symbol

• Use only the power cord supplied in the package. If a power cord is not supplied, only use the power cord and plug that is specified in POWER CORD INSTRUCTION. Failure to use this cord could result in a fire or electrical shock.

• Use the power cord supplied in the package only for this machine and NEVER use it for any other product. Failure to observe this precaution could result in a fire or electrical shock.

• Do not scratch, abrade, place a heavy object on, heat, twist, bend, pull on, or damage the power cord. Use of a damaged power cord (exposed core wire, broken wire, etc.) could result in a fire or breakdown. Should any of these conditions be found, immediately turn OFF the power switch, unplug the power cord from the power outlet, and then call your authorized service representative.

bizhub C252P 2-5

Installation and operation precautions

Power source

7 WARNING

Ignoring this warnings could cause serious injury or even death.

% Do not ignore this safety advices.

Warning Symbol

• Use only the specified power source voltage. Failure to do that could result in a fire or electrical shock.

• Connect power plug directly into wall outlet having the same configuration as the plug. Use of an adapter leads to the product connecting to inadequate power supply (voltage, current capacity, grounding), and may result in fire or shock. If proper wall outlet is not available, the customer shall ask qualified electrician for the installation.

• Do not use a multiple outlet adapter nor an extension cord in principle. Use of an adapter or an extension cord could cause a fire or electrical shock. Contact your authorized service representative if an extension cord is required.

• Consult your authorized service representative before connecting other equipment on the same wall outlet. Overload could result in a fire.

7 CAUTION

Ignoring this cautions could cause injury or damage to property.

% Do not ignore this safety advices.

Caution Symbol

• The outlet must be near the equipment and easily accessible. Otherwise you can not pull out the power plug when an emergency occurs.

2-6 bizhub C252P

Installation and operation precautions

Power plug

7 WARNING

Ignoring this warnings could cause serious injury or even death.

% Do not ignore this safety advices.

Warning Symbol

• Do not unplug and plug in the power cord with a wet hand, as an electrical shock could result.

• Plug the power cord all the way into the power outlet. Failure to do this could result in a fire or electrical shock.

7 CAUTION

Ignoring this cautions could cause injury or damage to property.

% Do not ignore this safety advices.

Caution Symbol

• Do not tug the power cord when unplugging. Pulling on the power cord could damage the cord, resulting in a fire or electrical shock.

• Remove the power plug from the outlet more than one time a year and clean the area between the plug terminals. Dust that accumulates between the plug terminals may cause a fire.

Grounding

7 WARNING

Ignoring this warnings could cause serious injury or even death.

% Do not ignore this safety advices.

Warning Symbol

• Connect the power cord to an electrical outlet that is equipped with a grounding terminal.

bizhub C252P 2-7

Installation and operation precautions

Installation

7 WARNING

Ignoring this warnings could cause serious injury or even death.

% Do not ignore this safety advices.

Warning Symbol

• Do not place a flower vase or other container that contains water, or metal clips or other small metallic objects on this product. Spilled water or metallic objects dropped inside the product could result in a fire, electrical shock, or breakdown. Should a piece of metal, water, or any other similar foreign matter get inside the product, immediately turn OFF the power switch, unplug the power cord from the power outlet, and then call your authorized service representative.

7 CAUTION

Ignoring this cautions could cause injury or damage to property.

% Do not ignore this safety advices.

Caution Symbol

• After installing this product, mount it on a secure base. If the unit moves or falls, it may cause personal injury.

• Do not place the product in a dusty place, or a site exposed to soot or steam, near a kitchen table, bath, or a humidifier. A fire, electrical shock, or breakdown could result.

• Do not place this product on an unstable or tilted bench, or in a location subject to a lot of vibration and shock. It could drop or fall, causing personal injury or mechanical breakdown.

• Do not let any object plug the ventilation holes of this product. Heat could accumulate inside the product, resulting in a fire or malfunction.

• Do not use flammable sprays, liquids, or gases near this product, as a fire could result.

2-8 bizhub C252P

Installation and operation precautions

Ventilation

7 CAUTION

Ignoring this cautions could cause injury or damage to property.

% Do not ignore this safety advices.

Caution Symbol

• Always use this product in a well ventilated location. Operating the product in a poorly ventilated room for an extended period of time could injure your health. Ventilate the room at regular intervals.

Actions in response to troubles

7 WARNING

Ignoring this warnings could cause serious injury or even death.

% Do not ignore this safety advices.

Warning Symbol

• Do not keep using this product, if this product becomes inordinately hot or emits smoke, or unusual odor or noise. Immediately turn OFF the power switch, unplug the power cord from the power outlet, and then call your authorized service representative. If you keep on using it as is, a fire or electrical shock could result.

• Do not keep using this product, if this product has been dropped or its cover damaged. Immediately turn OFF the power switch, unplug the power cord from the power outlet, and then call your authorized service representative. If you keep on using it as is, a fire or electrical shock could result.

bizhub C252P 2-9

Installation and operation precautions

7 CAUTION

Ignoring this cautions could cause injury or damage to property.

% Do not ignore this safety advices.

Caution Symbol

• The inside of this product has areas subject to high temperature, which may cause burns. When checking the inside of the unit for malfunctions such as a paper misfeed, do not touch the locations (around the fusing unit, etc.) which are indicated by a "Caution HOT" caution label.

Consumables

7 WARNING

Ignoring this warnings could cause serious injury or even death.

% Do not ignore this safety advices.

Warning Symbol

• Do not throw the toner cartridge or toner into an open flame. The hot toner may scatter and cause burns or other damage.

7 CAUTION

Ignoring this cautions could cause injury or damage to property.

% Do not ignore this safety advices.

Caution Symbol

• Do not leave a toner unit or drum unit in a place within easy reach of children. Licking or ingesting any of these things could injure your health.

• Do not store toner units and PC drum units near a floppy disk or watch that are susceptible to magnetism. They could cause these products to malfunction.

2-10 bizhub C252P

Installation and operation precautions

When moving the machine

7 CAUTION

Ignoring this cautions could cause injury or damage to property.

% Do not ignore this safety advices.

Caution Symbol

• Whenever moving this product, be sure to disconnect the power cord and other cables. Failure to do this could damage the cord or cable, resulting in a fire, electrical shock, or breakdown.

• When moving this product, always hold it by the locations specified in the user manual or other documents. If the unit falls it may cause severe personal injury. The product may also be damaged or malfunction.

Before successive holidays

7 CAUTION

Ignoring this cautions could cause injury or damage to property.

% Do not ignore this safety advices.

Caution Symbol

• Unplug the product when you will not use the product for long periods of time.

bizhub C252P 2-11

2.2 Regulation notices

CE Marking (Declaration of conformity) for users of the European Union (EU)

This product complies with the following EU directives: 89/336/EEC, 73/23/EEC and 93/68/EEC directives.

This declaration is valid for the area of the European Union.

This device must be used with a shielded network (10 Base-T/100 Base-TX) cable and a shielded parallel cable. The use of non-shielded cables is likely to result in interference with radio communications and is prohibited under CISPR rules and local rules.

USER INSTRUCTIONS FCC PART 15 - RADIO FREQUENCY DEVICES (for U.S.A. users)

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Installation and operation precautions

7 WARNING

The design and production of this unit conform to FCC regulations, and any changes or modifications must be registered with the FCC and are subject to FCC control.

Any changes made by the purchaser or user without first contacting the manufacturer will be subject to penalty under FCC regulations.

% This device must be used with a shielded network (10 Base-T/100

Base-TX) cable and a shielded parallel cable. The use of non-shielded cables is likely to result in interference with radio communications and is prohibited under FCC rules.

2-12 bizhub C252P

Installation and operation precautions

INTERFERENCE-CAUSING EQUIPMENT STANDARD (ICES-003 ISSUE 4) (for Canada users)

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

For users in countries not subject to class B regulations

7 WARNING

Interference with radio communications.

% This is a Class A product. In a domestic environment this product may

cause radio interference in which case the user may be required to take adequate measures.

% This device must be used with a shielded network (10 Base-T/100

Base-TX) cable and a shielded parallel cable. The use of non-shielded cables is likely to result in interference with radio communications and is prohibited under CISPR rules and local rules.

bizhub C252P 2-13

Installation and operation precautions

Laser safety

Specification

Maximum Average Radiation Power

Wavelength 775-800 nm

8.0 μW at the laser aperture of the print head unit

7 WARNING

This product employs a Class 3B laser diode that emits an invisible laser beam.

% The laser diode and the scanning polygon mirror are incorporated in

the print head unit.

% The print head unit is NOT A FIELD SERVICE ITEM:

Therefore, the print head unit should not be opened under any circumstances.

Laser aperture of the print head unit

Print head

2-14 bizhub C252P

Installation and operation precautions

CDRH regulations

This machine is certified as a Class 1 Laser product under Radiation Performance Standard according to the Food, Drug and Cosmetic Act of

1990. Compliance is mandatory for Laser products marketed in the United States and is reported to the Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration of the U.S. Department of Health and Human Services (DHHS). This means that the device does not produce hazardous laser radiation.

The label shown on page 2-18 indicates compliance with the CDRH regulations and must be attached to laser products marketed in the United States.

7 CAUTION

Use of controls, adjustments or performance of procedures other than those specified in this manual may result in hazardous radiation exposure.

% This is a semiconductor laser. The maximum power of the laser diode

is 10 mW and the wavelength is 775-800 nm.

bizhub C252P 2-15

Installation and operation precautions

For European users

7 CAUTION

Use of controls, adjustments or performance of procedures other than those specified in this manual may result in hazardous radiation exposure.

% This is a semiconductor laser. The maximum power of the laser diode

is 10 mW and the wavelength is 775-800 nm.

For Denmark users

7 ADVARSEL

Usynlig laserstråling ved åbning, når sikkerhedsafbrydere er ude af funktion.

% Undgå udsættelse for stråling. Klasse 1 laser produkt der opfylder

IEC60825 sikkerheds kravene.

Dette er en halvlederlaser. Laserdiodens højeste styrke er 10 mW og bølgelængden er 775-800 nm.

For Finland, Sweden users

LOUKAN 1 LASERLAITE KLASS 1 LASER APPARAT

7 VAROITUS

Tämä on puolijohdelaser.

% Laitteen Käyttäminen muulla kuin tässä käyttöohjeessa mainitulla

tavalla saattaa altistaa käyttäjän turvallisuusluokan 1 ylittävälle näkymättömälle lasersäteilylle.

Tämä on puolijohdelaser. Laserdiodin sunrin teho on 10 mW ja aallonpituus on 775-800 nm.

2-16 bizhub C252P

Installation and operation precautions

7 VARNING

Det här är en halvledarlaser.

% Om apparaten används på annat sätt än i denna bruksanvisning

specificerats, kan användaren utsättas för osynlig laserstrålning, som överskrider gränsen för laserklass 1.

Det här är en halvledarlaser. Den maximala effekten för laserdioden är 10 mW och våglängden är 775-800 nm.

7 VAROITUS

Avattaessa ja suojalukitus ohitettaessa olet alttiina näkymättömälle lasersäteilylle.

% Älä katso säteeseen.

7 VARNING

Osynlig laserstrålning när denna del är öppnad och spärren är urkopplad.

% Betrakta ej strålen.

For Norway users

7 ADVARSEL!

Dette en halvleder laser.

% Dersom apparatet brukes på annen måte enn spesifisert i denne

bruksanvisning, kan brukeren utsettes for unsynlig laserstråling som overskrider grensen for laser klass 1.

Dette en halvleder laser. Maksimal effekt till laserdiode er 10 mW og bølgelengde er 775-800 nm.

bizhub C252P 2-17

Installation and operation precautions

Laser safety label

A laser safety label is attached to the outside of the machine, as shown below.

* Only for the U.S.A.

2-18 bizhub C252P

Installation and operation precautions

Ozone release

7 CAUTION

Locate the Machine in a Well Ventilated Room

% A negligible amount of ozone is generated during normal operation of

this machine. An unpleasant odor may, however, be created in poorly ventilated rooms during extensive machine operations. For a comfortable, healthy, and safe operating environment, it is recommended that the room well ventilated.

7 ATTENTION

Une quantité d’ozone négligable est dégagée pendant le fonctionnement de l’appareil quand celui-ci est utilisé normalement.

Cependant, une odeur désagréable peut être ressentie dans les pièces dont l’aération est insuffisante et lorsque une utilisation prolongée de l’appareil est effectuée. Pour avoir la certitude de travailler dans un environnement réunissant des conditions de confort, santé et de sécurité, il est préférable de bien aérer la pièce ou se trouve l’appareil.

% Placer l’appareil dans une pièce largement ventilée.

Acoustic noise (for European users only)

Maschinenlärminformations-Verordnung 3. GPSGV: Der höchste Schalldruckpegel beträgt 70 dB(A) oder weniger gemäss EN ISO 7779.

For EU member states only

This symbol means: Do not dispose of this product together with your household waste!

Please refer to the information of your local community or contact our dealers regrading the proper handling of end-oflife electric and electronic equipments. Recycling of this product will help to conserve natural resources and prevent potential negative consequences for the environment and human health caused by inappropriate waste handling.

This product complies with RoHS (2002/95/EC) Directive.

bizhub C252P 2-19

Installation and operation precautions

2.3 Caution notations and labels

Safety precaution notations and labels appear on this machine at the following positions.

Be very careful that an accident does not occur when operations such as removing paper misfeeds are performed.

WARNING

Do not burn used toner cartridges. Toner expelled from the fire is dangerous.

CAUTION

Do not alter or remove any covers or panels attached to this machine, otherwise you may be exposed to laser radiation.

WARNING

Do not position the used waste-toner box so that it is standing on end or tilted, otherwise toner may spill.

CAUTION

Do not burn the used waste-toner box. Toner expelled from the fire is dangerous.

WARNING

Do not burn used imaging units. Toner expelled from the fire is dangerous.

CAUTION

The area around the fusing unit is extremely hot. Touching any part other than those indicated may result in burns.

2-20 bizhub C252P

Installation and operation precautions

2.4 Space requirements

To ensure that machine operation, consumables replenishing, part replacement, and regular maintenance can easily be performed, adhere to the recommended space requirements detailed below.

190

(7-1/2)

437

1212

(47-3/4)

C252P+FS-514+PC-403+SD-503+OT-601

341

(13-1/2)

(17-1/4)

1208 (47-1/2)

712 (28)

Unit: mm (inch)

100

(4)

Reminder

Be sure to allow a clearance of 100 mm (4 inch) or more at the back of this machine for the ventilation duct.

bizhub C252P 2-21

2.5 Operation precautions

To ensure the optimum performance of this machine, observe the precautions described below.

Power source

The power source requirements are as follows.

- Voltage fluctuation: Maximum ± 10% (at 110 V/120 to 127 V/220 to

240 V AC)

- Frequency fluctuation: Maximum ± 3 Hz (at 50 Hz/60 Hz) – Use a power source with as little voltage or frequency fluctuations as

possible.

Operating environment

The environmental requirements for correct operation of the machine are as follows.

- Temperature: 10°C (50°F) to 30°C (86°F) with fluctuations of no more than

10°C (18°F) within an hour

- Humidity: 15% to 85% with fluctuations of no more than 20% within an

hour

Storage of printed pages

To store printed pages, follow the recommendation listed below.

- Printed pages that are to be kept for a long time should be kept where

they are not exposed to light in order to prevent them from fading.

- Adhesive that contains solvent (e.g., spray glue) may dissolve the toner

on printed pages.

- Color printed pages have a thicker layer of toner than normal black-and-

white printed pages. Therefore, when a color printed page is folded, the toner at the fold may peel off.

Installation and operation precautions

2-22 bizhub C252P

Installation and operation precautions

2.6 Part names and their functions

Options

2345

bizhub C252P 2-23

Installation and operation precautions

No. Part Name Description

1 Main unit The data sent from the computer is printed.

2 Desk DK-502 Allows this machine to be set up on the floor.

3 Paper Feed Cabinet PC-103 The top tray can be loaded with up to 500 sheets of

4 Paper Feed Cabinet PC-203 Both the top and bottom trays can each be loaded

5 Paper Feed Cabinet PC-403 Can be loaded with up to 2,500 sheets of paper

6 Finisher FS-514 Feeds out finished printed pages. The "Sort" setting

7 Output Tray OT-601 Print output tray installed onto the finisher FS-514

8 Punch Kit PK-510 Allows hole punching to be used if installed onto fin-

9 Mailbin Kit MT-501 Installed onto the finisher FS-514 to divide printed

10 Saddle Stitcher SD-503 Installed onto the finisher FS-514 so that prints can

11 Finisher FS-603 Feeds out printed pages. The "Offset" setting (sep-

12 Punch Kit PK-501 Allows hole punching to be used if installed onto

13 Finisher FS-501 Finishes printed pages according to the selected

Referred to as the "machine", the "main unit", or the "C252P" throughout the manual.

Referred to as the "desk" throughout the manual.

paper, and the bottom tray can be used as storage. Referred to as the "single paper feed cabinet" throughout the manual.

with up to 500 sheets of paper. Referred to as the "double paper feed cabinet" throughout the manual.

Referred to as the "LCT" throughout the manual.

(separating by copy set), "Group" setting (separating by page), and Staple settings (corner stapling and two-point stapling) are available.

and used for separating printed pages Referred to as the "optional finishing tray" throughout the manual.

isher FS-514

pages and feed them into the appropriate tray assigned to a specific individual or group Referred to as the "mailbin" throughout the manual.

be bound or folded at the center Referred to as the "saddle stitcher" throughout the manual.

arating), Staple settings (stapling), and "Fold & Staple" function (binding) are available.

• In order to install the finisher, the main unit must be installed on the desk, on the LCT, on the single paper feed cabinet, or on the double paper feed cabinet.

Finisher FS-603.

Output setting (sorting or stapling), then feeds out the pages.

• In order to install the finisher, the main unit must be installed on the desk, on the LCT, or on the single paper feed cabinet or the double paper feed cabinet.

2-24 bizhub C252P

Installation and operation precautions

No. Part Name Description

14 Job Separator JS-601 Print exit tray installed on Finisher FS-501

15 Local Interface Kit EK-702* Used for making a local connection between this

16 Dehumidifer Heater 1C* Installed in the paper feed cabinet or desk to pre-

17 Hard Disk Drive HD-501* Operations using the "Secured Print" and "Save in

18 Security Kit SC-503* Installed to encode the data saved on the HDD so

* Parts marked with an asterisk (*) are internal options and therefore are not shown in the

illustration.

Reminder

In order to maintain the functionality and quality of the machine, be sure to use the desk or paper feed cabinet when installing the machine on the floor.

Referred to as the "job separator" throughout the manual.

machine and the computer.

vent humidity from collecting in the paper.

User Box" settings can be used if the hard disk drive is installed. Referred to as the "HDD" throughout the manual.

that the HDD can be used more safely.

Note

Either FS-501 or FS-603 can be installed on this machine as an option. A kit is required in order to install FS-501 or FS-603. For details, contact your technical representative.

bizhub C252P 2-25

Installation and operation precautions

Outside of machine

* The illustration above shows the main unit with the optional LCT installed.

2-26 bizhub C252P

Installation and operation precautions

No. Part Name Description

1 Automatic duplex unit Turns over the paper for double-sided printing

2 Multiple bypass tray Used when printing onto paper with a size not load-

3 LCT Can be loaded with up to 2,500 sheets of plain pa-

4 Tray release button Pressed in order to pull out the paper tray for the

5 Tray 2 Can be loaded with up to 500 sheets of plain paper

6 Tray 1 Can be loaded with up to 250 sheets of plain paper,

7 Front door Opened when replacing a toner cartridge (See

8 Power switch Used to turn the machine on and off (See

9 Print exit tray Collects printed pages

ed into a paper tray or onto thick paper, overhead projector transparencies, postcards, envelopes or label sheets Holds up to 100 sheets of plain paper, 20 overhead projector transparencies, postcards, label sheets, sheets of thick paper, or 10 envelopes Referred to as the "bypass tray" throughout the manual. (See p. 6-22.)

per

LCT

(See p. 6-16.)

can be set to different paper sizes, and can be loaded with up to 20 sheets of thick paper, overhead projector transparencies, postcards, label sheets, or envelopes (See p. 6-11.)

p. 7-5.)

page 2-43)

bizhub C252P 2-27

Installation and operation precautions

* The illustration above shows the main unit with the optional double paper feed cabinet installed.

2-28 bizhub C252P

Installation and operation precautions

No. Part Name Description

10 Automatic duplex unit release le-

ver

11 Automatic duplex unit door Opened when clearing paper misfeeds within the

12 Upper right-side door release le-

ver

13 Center right-side door Opened when clearing paper misfeeds from the

14 Center right-side door release le-

ver

15 Lower right-side door Opened when clearing paper misfeeds from the

16 Lower right-side door release le-

ver

17 Tray 4/storage tray Used for storage when the single paper feed cabi-

18 Tray 3 Can be loaded with up to 500 sheets of plain paper

19 Control panel Used to specify the various settings (See p. 2-42.)

Used to open the automatic duplex unit door when clearing paper misfeeds

automatic duplex unit

Used to open the upper right-side door

Tray 2

Used to open the center right-side door

Tray 3 or 4 or from the LCT

Used to open the lower right-side door when clearing paper misfeeds

net is installed Can be loaded with up to 500 sheets of plain paper when the double paper feed cabinet is installed (See p. 6-16.)

(See p. 6-16.)

bizhub C252P 2-29

Installation and operation precautions

* The illustration above shows the main unit with the optional LCT, and dehumidifier heater installed.

2-30 bizhub C252P

Installation and operation precautions

No. Part Name Description

20 Power connector Used for connecting the power cord

21 Dehumidifier heater power switch Used to turn the dehumidifier heater on and off.

22 Filter 2 Collects the toner dust generated in the machine

23 IEEE1284 port (type C) Used for connecting the parallel cable from the

24 USB port (type B)

USB 2.0/1.1-compliant

25 Network connector

(10 Base-T/100 Base-TX)

26 Ozone filter Collects the ozone generated in the machine

27 Finisher connector Used for connecting the finisher hookup cord

28 Filter 1 Collects the toner dust generated in the machine

Turning on the dehumidifier heater reduces moisture in the paper. This switch is used when the optional dehumidifier heater is installed.

computer

Used for connecting a USB cable from the computer

Used for connecting the network cable when this machine is used for network printing and network scanning

bizhub C252P 2-31

Installation and operation precautions

Inside of machine

* The illustration above shows the main unit with the optional LCT installed.

2-32 bizhub C252P

Installation and operation precautions

No. Part Name Description

1 Fusing unit cover Opened when clearing paper misfeeds in the fusing

2 M2 release levers Used when printing on envelopes. Used when

3 Main unit right-side door Opened when clearing paper misfeeds from inside

4 Unlocking knob Used when removing the imaging units

5 Imaging unit Creates the print image

6 Charger-cleaning tool Used to clean the electrostatic charger wire, for ex-

7 Print head glass cleaning tool Used to clean the surface of the print head glass,

8 Waste toner box Collects used waste toner

9 Waste toner box release lever Used when removing the waste toner box

10 Total counter Shows the total number of pages that have been

11 Locking tab Used when removing the toner cartridges

12 Toner cartridges There are four toner cartridges: cyan (C), magenta

unit

clearing paper misfeeds in the fusing unit.

the main unit

ample, when incorrect copies are produced (See p. 8-5.)

for example, when replacing the imaging unit

printed

(M), yellow (Y) and black (K). The combination of the four toners generates full-color images

bizhub C252P 2-33

Finisher FS-603/Punch kit PK-501

Installation and operation precautions

2-34 bizhub C252P

Installation and operation precautions

No. Part Name Description

1 Exit tray 1 Collects printed pages

2 Upper door Opened when clearing paper misfeeds (See

3 Horizontal transport unit cover Opened when clearing paper misfeeds from the

4 Hole-punch waste container Removed when emptying hole-punch waste that

5 Misfeed-clearing guide Opened when clearing paper misfeeds within the

6 Right-side door Opened when clearing paper misfeeds within the

7 Exit tray 2 Collects copies printed using the "Fold & Staple"

8 Misfeed-clearing dial in folding

section

9 Staple cartridge holder Removed from the stapler unit when clearing

10 Misfeed-clearing dial 1 Turned when clearing paper misfeeds within the fin-

11 Misfeed-clearing dial 2 Turned when clearing jammed staples or replacing

12 Stapler unit Pulled out when clearing jammed staples or replac-

13 Front door Opened when clearing paper misfeeds or jammed

14 Punch kit* Punches holes for filing printed pages when punch

* Parts marked with an asterisk (*) are installed within the finisher and therefore are not shown in

the illustration.

p. 9-28.)

horizontal transport unit (See p. 9-28.)

has accumulated from using the Punch settings (See p. 8-7.)

finisher (See p. 9-28.)

setting

Turned when clearing paper misfeeds in the folding section (See p. 9-28.)

jammed staples or replacing the staple cartridge (See p. 7-11, p. 9-42.)

isher (See p. 9-28.)

the staple cartridge, or for moving the staple cartridge holder out to the front (See p. 9-42.)

ing the staple cartridge (See p. 7-11, p. 9-42.)

staples or when replacing the staple cartridge (See p. 7-11, p. 9-42.)

kit is installed onto Finisher FS-603

bizhub C252P 2-35

Installation and operation precautions

Finisher FS-501/Job separator JS-601

2-36 bizhub C252P

Installation and operation precautions

No. Part Name Description

1 Front door FN4 Opened when clearing paper misfeeds within the

2 Misfeed-clearing dials FN5 Turned when clearing paper misfeeds within the fin-

3 Exit tray 2 Collects printed pages

4 Exit tray 1 Collects printed pages

5 Exit tray 3 Feeds out printed pages when job separator is in-

6 Job separator cover Opened when clearing paper misfeeds within the

7 Misfeed-clearing guide FN3 Opened when clearing paper misfeeds within the

8 Misfeed-clearing guide FN2 Opened when clearing paper misfeeds within the

9 Upper cover FN1 Opened when clearing paper misfeeds within the

10 Horizontal transport unit cover Opened when clearing paper misfeeds from the

11 Misfeed-clearing guide FN7 Opened when clearing paper misfeeds within the

12 Stapler Used to staple pages

13 Jammed-staple-clearing dial Turned when clearing jammed staples or replacing

finisher (See p. 9-24.)

isher (See p. 9-24.)

stalled onto Finisher FS-501

job separator (See p. 9-24.)

finisher (See p. 9-24.)

horizontal transport unit (See p. 9-24.)

finisher (See p. 9-24.)

the staple cartridge, or for moving the stapler to the center (See p. 7-8, p. 9-40.)

bizhub C252P 2-37

Installation and operation precautions

Saddle stitcher SD-503/Mailbin kit MT-501

Saddle stitcher SD-503

No. Part name Description

1 Print output tray Collects printed pages

2 Misfeed-clearing door Opened when clearing paper misfeeds within

the finisher

Mailbin kit MT-501

No. Part name Description

3 Mailbins Collects printed pages

4 Misfeed-clearing door Opened when clearing paper misfeeds

5 Lever [FN7] Opened when clearing paper misfeeds

2-38 bizhub C252P

Installation and operation precautions

Finisher FS-514/Output tray OT-601/Punch kit PK-510

34 5 6 7

89101112

bizhub C252P 2-39

Installation and operation precautions

Finisher FS-514

No. Part name Description

1 Output tray 1 Collects prints that are fed out

2 Output tray 2 Collects prints that are fed out

3 Dial [FN6] Turned when clearing paper misfeeds within the

4 Dial [FN5] Turned when clearing paper misfeeds within the

5 Dial [FN4] Turned when clearing paper misfeeds within the

6 Dial [FN2] Turned when clearing paper misfeeds within the

7 Lever [FN1] Raised when clearing paper misfeeds within the

8 Hole-punch waste container Removed when emptying hole-punch waste

9 Lever [FN3] Lowered when clearing paper misfeeds within

10 Stapler Moved to the front when clearing jammed sta-

11 Staple cartridge holder Removed from the stapler when replacing the

12 Dial Turned to move the stapler to the front when

finisher

that has accumulated from using the punch settings

the finisher

ples

staple cartridge or clearing jammed staples

clearing jammed staples

Output tray OT-601

No. Part name Description

13 Optional output tray Collects prints

Punch kit PK-510

No. Part name Description

14 Punch Kit* Punches holes for filing printed pages when

* Parts marked with an asterisk (*) are installed within the finisher and therefore are not shown in

the illustration.

punch kit PK-510 is installed onto finisher FS514

2-40 bizhub C252P

Installation and operation precautions

Precautions for using the finisher:

- When moving the finisher, do not grab the exit tray.

- Do not place objects on top of the saddle stitcher or mailbin kit.

- Do not place objects below the exit tray of the finisher.

bizhub C252P 2-41

Installation and operation precautions

Control panel

456

No. Part Name Description

1 Ready indicator Lights up when printing is possible and flashes

2 Error indicator Lights up when an error occurs.

3 [Cancel] key Press to cancel printing and other operations.

4 [Menu/Select] key Press to display the menu and select settings.

5 Cursor keys Press to change the menu and to enter values.

6 Display panel Displays various screens and messages.

when data is being received.

2-42 bizhub C252P

Installation and operation precautions

2.7 Basic operations

Turning on the machine

1 Set the power switch to [ n ].

2 Check that the control panel is turned on.

Detail

When the machine is turned on, the printer starts up and the message "Now warming-up." appears. After the message "Ready to print." appears and the Ready indicator lights up, a print job can be received.

The default settings, which are those that are selected immediately after the machine is turned on, can be changed. For details, refer to "Control panel" on page 5-3.

The factory default settings are the settings that were selected when this machine was sent from the factory.

Note

The machine takes about 110 seconds to warm up at normal room temperature (23°C).

bizhub C252P 2-43

Installation and operation precautions

Turning off the machine

% Set the power switch to [o].

Reminder

When the power switch is turned off, then on again, wait at least 10 seconds to turn it on after turning it off. If there is no wait period between turning the power switch off, then on again, the machine may not function properly.

Do not turn off the machine with the main power switch while it is making printing, otherwise a paper misfeed may occur.

Do not turn off the machine with the power switch while a queued job or stored data is waiting to be printed, otherwise the jobs will be deleted.

Detail

The following are cleared when the power switch is turned off. Settings that have not been programmed Jobs queued to be printed.

2-44 bizhub C252P

Installation and operation precautions

Automatically canceling the settings (automatic panel reset)

If no operation is performed for a specified length of time while settings are being changed, settings that have not been programmed are cleared and return to their defaults.

This is the automatic panel reset operation.

As the factory default, the automatic panel reset operation is performed after 1 minute.

Detail

The length of time until the automatic panel reset operation is performed and whether or not it is performed can be set from the Utility mode. For details, refer to "User Setting" on page 5-34.

Automatically conserving energy (Low Power mode)

If no operation is performed for a specified length of time the machine automatically enters a mode where it conserves energy.

This is the Low Power mode.

The machine can receive jobs even while it is in Low Power mode.

As the factory default, the machine enters Low Power mode after 10 minutes.

Note

When a print job is received, the machine recovers from Low Power mode and begins printing after it has finished warming up (within 30 seconds at normal room temperature (23°C)).

The Low Power mode can also be canceled by pressing any key in the control panel.

Detail

The length of time until the machine enters Low Power mode can be changed. For details, refer to "User Setting" on page 5-34.

bizhub C252P 2-45

Installation and operation precautions

Automatically conserving energy (Sleep mode)

If no operation is performed for a specified length of time, the machine automatically enters a mode where it conserves energy.

Although the machine conserves more energy in Sleep mode than in Low Power mode, the machine must warm up when Sleep mode is canceled to begin printing again, therefore taking more preparation time than Low Power mode.

As the factory default, the machine enters Sleep mode after 15 minutes.

Note

When a print job is received, the machine recovers from Low Power mode and begins printing after it has finished warming up (within 110 seconds at normal room temperature (23°C)).

The Sleep mode can also be canceled by pressing any key in the control panel.

Detail

The length of time until the machine enters Sleep mode can be changed. For details, refer to "User Setting" on page 5-34.

Power supply

Be sure to turn off the machine if it is not to be used for a long period of time, for example, overnight.

In order to ensure that no energy is being consumed, unplug the machine.

2-46 bizhub C252P

Installation and operation precautions

2.8 Connecting to a computer

Compatible interfaces

The various interfaces that can be used to connect this printer to a computer are described below.

Ethernet interface

Connect when using this printing system as a network printer.

Supports 10Base-T and 100Base-TX standards. In addition, the Ethernet interface supports the TCP/IP (LDP/LPR, peer-to-peer), IPX/SPX (NetWare), and AppleTalk (EtherTalk) protocols.

Parallel interface (optional

Connect when using this printing system as a local printer.

A computer running Windows and an IEEE 1284 parallel cable are required for connection. Use a parallel cable that uses a terminal with an Amphenol 36-pin male connector.

The parallel interface supports the compatible, nibble, and ECP modes.

USB interface (optional)

Connect when using this printing system as a USB printer.

The USB interface can be connected to a computer running Windows. A USB cable is required for connection. Use a type A (4 pin, male) or type B (4 pin, male) USB cable. A USB cable measuring 3 meters or less is recommended.

)

Note

The USB and parallel interfaces cannot be used as the same time. Change the setting in the "I/F Setting" menu of the "Admin. Setting" menu.

bizhub C252P 2-47

Installation and operation precautions

Connection diagram

The printer cables can be connected to each port at the back of this machine.

Ethernet (10 Base-T or 100Base-TX)

USB port

Parallel port

2-48 bizhub C252P

Setting up the printer driver

3 Setting up the printer driver

3.1 About the provided printer drivers

Printer drivers and supported operating systems

In order to use this printing system, the printer driver must be installed. The printer driver is a program that controls the processing of data for output. Install the printer driver onto the computer from the provided CD-ROM.

The printer drivers included on the CD and the supported computer operating systems are listed below. Install the required printer driver.

- PCL (PCL XL) Konica Minolta Driver:

Windows 98SE, Windows Me, Windows NT 4.0 (Service Pack 6a), Windows 2000 Professional (Service Pack 4 or later), Windows XP Home Edition, Windows XP Professional (Service Pack 2 or later), and Windows Server 2003

- PostScript 3 Emulation Konica Minolta:

Windows NT 4.0 (Service Pack 6a), Windows 2000 Professional (Service Pack 4 or later), Windows XP Home Edition/Professional (Service Pack 2 or later), Windows XP Professional x64, Windows Server 2003, and Windows Server 2003 x64

- PostScript 3 Emulation PPD Driver

Windows 98SE, Windows Me, Mac OS 9.2 or later, Mac OS X 10.2, Mac OS X 10.3, and Mac OS X 10.4

Note

The User Software CD-ROM contains the PCL printer driver, and the PostScript Driver CD-ROM contain the PostScript drivers.

bizhub C252P 3-3

Setting up the printer driver

System requirements

Check that the computer being connected meets the following conditions.

Windows

- Operating System:

Windows 98SE, Windows Me, Windows NT 4.0 (Service Pack 6a or later), Windows 2000 Professional (Service Pack 4 or later), Windows XP Home Edition (Service Pack 2 or later), Windows XP Professional (Service Pack 2 or later), or Windows Server 2003

- Processor: Pentium or higher

- Memory: Capacity recommended for the operating system

With sufficient memory resources in the operating system and application being used

- Drive: CD-ROM

- Web Browser (when using PageScope Web Connection):

Microsoft Internet Explorer 6 or later recommended (JavaScript enabled, Cookies enabled) Microsoft XML Parser (MSXML) 3.X must be installed when using Internet Explorer 5.5. Netscape Navigator 7.02 or later (JavaScript enabled, Cookies enabled) Macromedia later plugin is required.)

Macintosh

- Operating System: Mac OS 9.2, Mac OS X 10.2, Mac OS X 10.3, or Mac

OS X 10.4

- Processor: PowerPC, Intel Processor

- Memory: Capacity recommended for the operating system

- Drive: CD-ROM

- Web Browser (when using PageScope Web Connection):

Netscape Navigator 7.02 or later (JavaScript enabled, Cookies enabled) Macromedia later plugin is required.)

Flash® (If "Flash" is selected in View Mode, version 7.0 or

3-4 bizhub C252P

Setting up the printer driver

Setting up the system

In order to use this printing system, it must first be set up.

Setup consists of connecting this machine to a computer and installing the printer driver onto the computer being used.

Setup the printing system as described below.

1 Connect this machine to a computer. (Refer to "Connecting to a

computer" on page 2-47.)

2 Install the printer driver. (Refer to "Installing the printer driver" on

page 3-6.)

– Installation of the printer driver may differ depending on the

connection method used with this machine in addition to the operating system of the computer and the type of printer driver being used.

– To update an existing printer driver, delete the existing printer driver

first. For details, refer to "Uninstalling the printer driver" on page 3-17.

3 When using a network connection, set up the network. (Refer to

"Setting up network printing" on page 3-29.)

– As necessary, set the interface timeout settings and parallel

interface mode (Compatible, Nibble, or ECP) in the I/F Setting menu from the control panel. When using a parallel or USB port, you must select the port being used. For details, refer to "Admin. Setting" on page 5-40.

4 Check the setup by printing a test page. (Refer to "Test printing" on

page 3-27.)

5 Install the screen fonts.

– The User Software CD-ROM and PostScript Printer Driver CD-ROM

contain the Latin TrueType fonts as the screen fonts.

– Install the screen fronts after adding the operating system standard

fonts. For details, refer to Help of the operating system.

– The screen fonts are located in the Screenfont or Screenfonts folder

on the CD-ROM.

– To install the Macintosh fonts, install the fonts after decompressing

them.

bizhub C252P 3-5

3.2 Installing the printer driver

When used with Windows

The installation procedure of the Windows printer driver differs depending on how this machine is connected to the computer and depending on which printer driver is used. The installation method also differs depending on the version of Windows that you are using. Refer to the pages indicated below for the appropriate procedure for installing the printer driver on your computer.

PostScript/PCL (All connection methods):

PostScript/PCL (Network connection): To install the printer driver using the Add Printer Wizard, refer to "Installing the printer driver using the Add Printer Wizard" on page 3-8, "For Windows 98SE/Me/2000/NT 4.0" on page 3-10, or "For Windows XP/Server 2003" on page 3-8.

PostScript/PCL (Parallel connection): To install the printer driver using Plug and Play, refer to "Installing the printer driver using Plug and Play" on page 3-12, "For Windows 98SE" on page 3-12, "For Windows Me/2000" on page 3-13, or "For Windows XP/Server 2003" on page 3-15. To install the printer driver using the Add Printer Wizard, refer to "Installing the printer driver using the Add Printer Wizard" on page 3-8, "For Windows 98SE/Me/2000/NT 4.0" on page 3-10, or "For Windows XP/Server 2003" on page 3-8.

PostScript/PCL (USB connection): To install the printer driver using Plug and Play, refer to "Installing the printer driver using Plug and Play" on page 3-12, "For Windows 98SE" on page 3-12, "For Windows Me/2000" on page 3-13, or "For Windows XP/Server 2003" on page 3-15.

Setting up the printer driver

Note

For details on installing the printer driver in a network environment, refer to "Setting up network printing" on page 3-29. Because it is necessary to specify other network settings in advance when installing the printer driver using a network connection, install it using a local connection at this time.

3-6 bizhub C252P

Setting up the printer driver

Note

To install the printer driver on a computer running Windows XP, Windows Server 2003, Windows 2000, or Windows NT 4.0, log on with a user name registered with Administrator privileges.

To connect this machine to a computer using a parallel connection or a USB connection, the optional local interface kit is required.

bizhub C252P 3-7

Setting up the printer driver

Installing the printer driver using the Add Printer Wizard

Note

For IPP printing, it is not necessary to install the printer driver at this time since IPP printing setup is performed when the printer driver is installed.

For further details on IPP printing, refer to "IPP printing (Windows 2000/XP/Server 2003)" on page 3-48.

Note

For Windows XP/Server 2003

1 Insert the Windows printer driver CD-ROM into the computer’s CD-

ROM drive.

– Konica Minolta PCL driver: User Software CD-ROM – Konica Minolta PostScript driver: PostScript Printer Driver CD-

ROM

2 Click the [Start] button, and then click "Printers and Faxes".

– If "Printers and Faxes" is not displayed in the Start menu, click

"Control Panel" in the Start menu, double-click "Printers and Other Hardware", and then double-click "Printers and Faxes".

3 For Windows XP, click "Add a printer" on the "Printer Tasks" menu.

– For Windows Server 2003, double-click the "Add Printer" icon. The Add Printer Wizard starts up.

4 Click the [Next] button.

5 Select "Local printer attached to this computer", and then click the

[Next] button.

– Clear the "Automatically detect and install my Plug and Play

printer" check box.

3-8 bizhub C252P

Setting up the printer driver

6 The Select Printer Port dialog box appears. Select "LPT1" here, and

then click the [Next] button.

7 Click the [Have Disk] button.

8 Click the [Browse] button.

9 Specify the folder on the CD-ROM that contains the printer driver for

the operating system that you are using, and then click the [OK] button.

– Konica Minolta PCL driver: Folder at Driver\bizhubC252_C252P on

the User Software CD-ROM

– Konica Minolta PostScript driver: Folder at Driver\bizhubC252 on

the PostScript Printer Driver CD-ROM

10 Click the [OK] button.

The "Printers" list appears.

11 Click the [Next] button.

12 Follow the on-screen instructions.

– When the Digital Signature message appears, click the [Continue]

button.

– When using a network connection, perform a test print after the

network settings have been specified.

13 When installation is complete, make sure that the icon of the installed

printer appears in the Printers and Faxes window.

14 Remove the CD-ROM from the CD-ROM drive.

This completes the printer driver installation.

bizhub C252P 3-9

Setting up the printer driver

For Windows 98SE/Me/2000/NT 4.0

1 Insert the Windows printer driver CD-ROM into the computer’s CD-

ROM drive.

– Konica Minolta PCL driver: User Software CD-ROM – Konica Minolta PostScript driver: PostScript Printer Driver CD-

ROM

2 Click the [Start] button, point to "Settings", and then click "Printers".

The Printers window appears.

3 Double-click the "Add Printer" icon.

The Add Printer Wizard starts up.

4 Follow the on-screen instructions.

5 On the screen for selecting the printer connection, select "Local

Printer".

6 Click the [Next] button.

7 Click the [Have Disk] button.

8 Click the [Browse] button.

9 Specify the directory on the CD-ROM that contains the printer driver for

the operating system that you are using, and then click the [OK] button.

– For Windows 98SE/Me

Konica Minolta PCL driver: Folder at Driver\bizhubC252_C252P on the User Software CD-ROM PostScript PPD driver: Folder at Driver\PS-PPD on the PostScript Printer Driver CD-ROM

– For Windows 2000

Konica Minolta PCL driver: Folder at Driver\bizhubC252_C252P on the User Software CD-ROM Konica Minolta PostScript driver: Folder at Driver\bizhubC252 on the PostScript Printer Driver CD-ROM

– For Windows NT 4.0

Konica Minolta PCL driver: Folder at Driver\bizhubC252_C252P on the User Software CD-ROM Konica Minolta PostScript driver: Folder at Driver\bizhubC252 on the PostScript Printer Driver CD-ROM

3-10 bizhub C252P

Setting up the printer driver

10 Click the [OK] button.

The "Printers" list appears.

11 Click the [Next] button.

12 Specify the connection port. Select "LPT1" here.

13 Follow the on-screen instructions.

– When using a network connection, perform a test print after the

network settings have been specified.

14 When installation is complete, make sure that the icon of the installed

printer appears in the Printers window.

15 Remove the CD-ROM from the CD-ROM drive.

This completes the printer driver installation.

bizhub C252P 3-11

Setting up the printer driver

Installing the printer driver using Plug and Play

For Windows 98SE

1 After using a parallel cable or a USB cable to connect this machine to

a computer, turn on the computer.

– Do not disconnect or connect the cable while the computer is

starting up.

2 Insert the Windows printer driver CD-ROM into the computer’s CD-

ROM drive.

– Konica Minolta PCL driver: User Software CD-ROM – Konica Minolta PostScript driver: PostScript Printer Driver CD-

ROM

3 Turn this machine on.

The Add New Hardware Wizard starts up.

4 Click the [Next] button.

5 Select "Search for the best driver for your device (Recommended)",

and then click the [Next] button.

6 Select "Specify a location", and then click the [Browse] button.

7 Specify the folder on the CD-ROM that contains the printer driver for

the operating system that you are using, and then click the [OK] button.

– Konica Minolta PCL driver: Folder at Driver\bizhubC252_C252P on

the User Software CD-ROM

– PostScript PPD driver: Folder at Driver\PS-PPD on the PostScript

Printer Driver CD-ROM

8 Click the [Next] button, and then follow the on-screen instructions.

– With a parallel connection, continue with step 10.

9 The Add New Hardware Wizard dialog box appears again. Repeat

steps 4 through 8.

10 When installation is complete, make sure that the icon of the installed

printer appears in the Printers window.

11 Remove the CD-ROM from the CD-ROM drive.

This completes the printer driver installation.

3-12 bizhub C252P

Setting up the printer driver

For Windows Me/2000

1 After using a parallel cable or a USB cable to connect this machine to

a computer, turn on the computer.

– Do not disconnect or connect the cable while the computer is

starting up.

2 Insert the Windows printer driver CD-ROM into the computer’s CD-

ROM drive.

– Konica Minolta PCL driver: User Software CD-ROM – Konica Minolta PostScript driver: PostScript Printer Driver CD-

ROM

3 Turn this machine on.

– For Windows Me

The Add New Hardware Wizard starts up.

– For Windows 2000

The Found New Hardware Wizard starts up.

4 Select "Search for a suitable driver for my device (recommended)" (for

Windows Me, select "Automatic search for a better driver (Recommended)"), and then click the [Next] button.

5 For Windows 2000, select "Specify a location", and then click the

[Next] button. For Windows Me, select "Specify a Location", and then click the [Browse] button.

6 Specify the folder on the CD-ROM that contains the printer driver for

the operating system that you are using, and then click the [OK] button.

– For Windows Me

Konica Minolta PCL driver: Folder at Driver\bizhubC252_C252P on the User Software CD-ROM Postscript PPD: Folder at Driver\PS-PPD on the PostScript Printer Driver CD-ROM

– For Windows 2000

Konica Minolta PCL driver: Folder at Driver\bizhubC252_C252P on the User Software CD-ROM Konica Minolta PostScript driver: Folder at Driver\bizhubC252 on the PostScript Printer Driver CD-ROM

7 Click the [OK] button (for Windows Me, click the [Next] button), and

then follow the on-screen instructions.

bizhub C252P 3-13

Setting up the printer driver

8 Click the [Finish] button.

9 When installation is complete, make sure that the icon of the installed

printer appears in the Printers window.

10 Remove the CD-ROM from the CD-ROM drive.

This completes the printer driver installation.

3-14 bizhub C252P

Setting up the printer driver

For Windows XP/Server 2003

1 After using a parallel cable or a USB cable to connect this machine to

a computer, turn on the computer.

– Do not disconnect or connect the cable while the computer is

starting up.

2 Insert the Windows printer driver CD-ROM into the computer’s CD-

ROM drive.

– Konica Minolta PCL driver: User Software CD-ROM – Konica Minolta PostScript driver: PostScript Printer Driver CD-

ROM

3 Turn this machine on.

– The Add New Hardware Wizard starts up.

If the Add New Hardware Wizard does not appear, turn this machine off, then on again.

– When turning the machine off, wait for 10 seconds or longer before

turning it on again; otherwise the machine may not function normally.

4 Select "Install from a list or specific location (Advanced)", and then

click the [Next] button.

5 Under "Search for the best driver in these locations", select "Include

this location in the search", and then click the [Browse] button.

6 Depending on the operating system and printer driver that you are

using, specify the folder on the CD-ROM that contains the printer driver, and then click the [OK] button.

– Konica Minolta PCL driver: Folder at Driver\bizhubC252_C252P on

the User Software CD-ROM

– Konica Minolta PostScript driver: Folder at Driver\bizhubC252 on

the PostScript Printer Driver CD-ROM

7 Click the [Next] button, and then follow the on-screen instructions.

– When the Digital Signature dialog box appears, click the [Continue]

button.

bizhub C252P 3-15

Setting up the printer driver

8 Click the [Finish] button.

9 When installation is complete, make sure that the icon of the installed

printer appears in the Printers and Faxes window.

10 Remove the CD-ROM from the CD-ROM drive.

This completes the printer driver installation.

3-16 bizhub C252P

Setting up the printer driver

Uninstalling the printer driver

If it becomes necessary to delete the printer driver, for example, when you want to reinstall the printer driver, follow the procedure below to delete the driver.

1 For Windows 98SE/Me/2000/NT 4.0, click the [Start] button, point to

"Settings", and then click "Printers". For Windows XP/Server 2003, click the [Start] button, and then click "Printers and Faxes".

– If "Printers and Faxes" is not displayed in the Start menu, click

"Control Panel" in the Start menu, double-click "Printers and Other Hardware", and then double-click "Printers and Faxes".

2 In the Printers window (for Windows XP/Server 2003, Printers and

Faxes window), select the icon of the printer that you want to delete.

3 Press the [Delete] key on the computer keyboard to delete the printer

driver.

4 Follow the on-screen instructions.

– When the printer driver has been deleted, the printer icon will

disappear from the Printers window (for Windows XP/Server 2003, Printers and Faxes window).

This completes the uninstallation procedure.

5 Restart the computer.

bizhub C252P 3-17

Setting up the printer driver

Note

Be sure to restart the computer.

Even if the printer driver is deleted using the method described above, the model information file will remain in the computer. Therefore, the driver may not be able to be overwritten when reinstalling the same version of the printer driver. When installing the same version of the printer driver, be sure to also delete the files described below.

Check the "C:\WINDOWS\system32\spool\drivers\w32x86" folder and delete the folder of the corresponding model if it is available. If the Konica Minolta PCL driver and Konica Minolta PostScript driver are both installed, the model information of both drivers is deleted. If one driver is remaining, do not delete it.

Delete the "oem*.inf" and "oem*.PNF" files in the "C:\WINDOWS\inf" folder. (The asterisk (*) in the file name displays a number, and the number varies according to the environment of the computer.) Before deleting the files, open the INF file, check that the model name is described in the last several lines, and then check that the file of the corresponding model is available.

The PNF file is the same number as the INF file.

3-18 bizhub C252P

Setting up the printer driver

When used with Macintosh

The installation procedure for the Macintosh printer driver differs depending on the Mac OS version and printer driver being used. Refer to the table below for the appropriate procedure for installing the printer driver on your Macintosh computer.

Mac OS Printer Driver Refer to

Mac OS X 10.2, Mac OS X 10.3 and Mac OS X 10.4

Mac OS 9.2 or later PostScript PPD "For Mac OS 9.2" on page 3-23

PostScript PPD "Installing the printer driver" on page 3-20

bizhub C252P 3-19

Setting up the printer driver

Installing the printer driver

For Mac OS X

1 Turn the Macintosh computer on.

– Quit all running applications that may have started when the

Macintosh computer was turned on.

2 Insert the Macintosh printer driver CD-ROM into the Macintosh

computer’s CD-ROM drive.

3 Open the OS10_2_x or OS_3_x folder in English\Driver on the CD-

ROM.

4 Select the folder for the Mac OS version being used, and then copy the

driver file onto the desktop.

5 Double-click the file copied onto the desktop.

– Enter the requested administrator’s name and password. – For the administrator’s name and password, contact your network

administrator.

– To quit the installation, click the [Cancel] button.

6 Click the [Continue] button and follow the on-screen instructions until

the Installation dialog box appears.

7 On the Installation dialog box, click the [Continue] button.

– From the second time the printer driver is installed, the [Install]

button may appear as the [Upgrade] button.

The printer driver is installed onto the Macintosh computer. When installation is complete, a message appears.

8 Click the [Close] button.

This completes the printer driver installation. Next, select the printer.

3-20 bizhub C252P

Setting up the printer driver

Selecting a printer

Note

If connecting using AppleTalk, the AppleTalk settings on this machine must be specified. For specifying the AppleTalk settings, refer to "Printing with Macintosh" on page 3-64.

If connecting using Bonjour with Mac OS X 10.4, the Bonjour settings must be specified on this machine. For specifying the Bonjour settings, refer to "Printing with Macintosh" on page 3-64.

If connecting using Rendezvous with Mac OS X 10.3, the Bonjour settings must be specified on this machine. For specifying the Bonjour settings, refer to "Printing with Macintosh" on page 3-64.

For Mac OS X

After connecting this machine to a Macintosh computer, it can be used as a printer by selecting it in Print Center or the Printer Setup Utility as the printer to be used.

1 Open Print Center or Printer Setup Utility, located in "Applications"—

"Utilities" of "Hard Disk".

2 When the Add Printer dialog box appears, click the [Add] button. When

the printer list appears, click the [Add] button.

– For Mac OS X 10.4, proceed to step 3. – For Mac OS X 10.2 and Mac OS X 10.3, proceed to step 4. – If usable printers have already been set up, the Add Printer dialog

box does not appear.

3 If this machine appears as a printer of a Bonjour connection, select

"KONICA MINOLTA" from the "Print Using" drop-down list, select "KONICA MINOLTA C252 PS(P)" in the model list, and then click the [Add] button.

– If the selected printer is registered in the printer list, this completes

the setting procedure.

– When connecting with AppleTalk and this machine does not appear

as a printer, click the [More Printers] button, and then proceed to step 4.

bizhub C252P 3-21

Setting up the printer driver

4 Select the applicable connection method and printer name.

– To specify an AppleTalk zone for an AppleTalk connection, select

"Local AppleTalk Zone".

– When "IPP" is selected as the protocol in IP Printer, the text box for

entering the queue name appears. For Mac OS 10.3, leave the queue name text box empty. For Mac OS 10.4, enter "ipp" in the queue name text box.

5 Select "KONICA MINOLTA" from the "Printer Model" drop-down list.

6 Select "KONICA MINOLTA C252 PS(P)", and then click the [Add]

button.

The selected printer is registered in the printer list.

3-22 bizhub C252P

Setting up the printer driver

For Mac OS 9.2

After connecting this machine, it can be used as a printer by selecting the PostScript printer from the Chooser and by specifying the printer description (PPD) file.

First, copy the printer description (PPD) file onto the Macintosh computer.

1 Insert the Macintosh printer driver CD-ROM into the Macintosh

computer’s CD-ROM drive.

2 Open the OS 9_x folder in English\Driver on the CD.

3 Select the KONICAMINOLTAC252UVxxx.ppd file, and then copy it into

the Printer Description File folder in Hard Disk\System Folder\Extentions. Next, select a printer. The printer driver can use a standard Macintosh LaserWriter.

4 On the Apple menu, click "Chooser".

5 Make sure that "AppleTalk" is set to "Active", and then click the

"LaserWriter" icon.

6 From the "Select a PostScript Printer" list, click the applicable printer

for the printing system, and then click the [Create] button.

The PostScript printer description (PPD) file selection screen appears.

What should be done if a different PPD file has already been

selected?

% Click the [Setup] button, and then click the [Select PPD] button

from the screen that is already displayed.

7 Select the applicable PPD file, and then click the [Select] button or the

[Open] button.

The setting screen for adding Options appears.

8 In the Options Installed 1 and Options Installed 2 panes, select the

options that are installed on this machine.

9 Click the [OK] button.

The Chooser window appears again.

10 Close the Chooser window.

bizhub C252P 3-23

Setting up the printer driver

Uninstalling the printer driver

If it becomes necessary to delete the printer driver, for example, when you want to reinstall the printer driver, follow the procedure below to delete the driver.

Note

Quit all running applications that may have started when the Macintosh computer was turned on.

For Mac OS X

1 Open Print Center or Printer Setup Utility, located in Hard

Disk\Applications\Utilities.

2 Select the name of the printer to be deleted, and then click the [Delete]

button.

The selected printer is deleted.

3 Close the printer list.

4 Drag the following file, which is located at Hard

Disk\Library\Printers\PPDs\Contents\Resources\en.lproj, to the "Trash" icon.

– KONICA MINOLTA C252.gz

5 Delete the unnecessary files from Library\Printers.

6 For Mac OS 10.3 and Mac OS 10.4, drag the "***c252" file, which is

located in Library\Printers\ KONICAMINOLTA\filter, and the following files, which are located in Library\Printers\KONICAMINOLTA\PDEs, to the "Trash" icon.

– KONICAMINOLTAC252 Finishing.plugin – KONICAMINOLTAC252 ImageLayout.plugin – KONICAMINOLTAC252 Security.plugin – KONICAMINOLTAC252 Setup.plugin

3-24 bizhub C252P

Setting up the printer driver

7 For Mac OS 10.2, drag the following files, which are located in

Library\Printer\PPD Plugins, to the "Trash" icon.

– KONICAMINOLTAC252 Finishing.plugin – KONICAMINOLTAC252 ImageLayout.plugin – KONICAMINOLTAC252 Security.plugin – KONICAMINOLTAC252 Setup.plugin

Enter "/usr" in Go\Go to folder to open to the "/usr" folder, and then drag the "***c252" data, which is located in libexec\cups\filter, to the "Trash" icon.

8 Restart the Macintosh computer.

This completes the uninstallation procedure.

For Mac OS 9.2

1 Drag the KONICAMINOLTAC252UVxxx.ppd file, which is located in

Hard Disk\System Folder\Extensions\Printer Descriptions, to the "Trash" icon.

The related printer driver files are deleted.

2 Restart the Macintosh computer.

This completes the uninstallation procedure.

bizhub C252P 3-25

3.3 Printing operations

For Windows

Printing is possible when the printer driver is installed and the network settings have been specified. Print jobs are specified from the application software.

Printing operation

1 Open the data in the application, click "File", and then click "Print".

2 Check that the printer name has been selected in "Printer Name" or

"Select Printer" drop-down list.

– If the desired printer is not selected, click the currently selected

printer name, and then select the desired printer.

– The Print dialog box differs depending on the application.

3 Specify the page range and the number of copies to print.

4 Click the [Preferences] button or the [Properties] button to change the

printer driver settings as necessary.

– By clicking the "Preferences" button or the "Properties" button on

the Print dialog box, you can specify settings for each model from the printer driver dialog box that appears. For details, refer to "Setting up the PCL driver" on page 4-6, "Setting up the PostScript driver (Windows)" on page 4-49, or "Setting up the PPD driver (Windows)" on page 4-85.

– If the changed settings are not saved in the Print dialog box, the

original settings are restored when the application is exited.

Setting up the printer driver

5 Click the [Print] button.

The Data indicator of this machine flashes.

3-26 bizhub C252P

Konica Minolta C252P User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

1 Introduction

1.1 Energy Star®

What is an Energy Star® product?

1.2 Trademarks and registered trademarks

License information

OpenSSL Statement

1.3 Software licence agreement

1.4 Explanation of manual conventions

Safety advices

Sequence of action

Tips

Special text markings

2 Installation and operation precautions

2.1 Safety information

Warning and precaution symbols

Meaning of Symbols

Disassemble and modification

Power cord

Power source

Power plug

Grounding

Installation

Ventilation

Actions in response to troubles

Consumables

When moving the machine

Before successive holidays

2.2 Regulation notices

CE Marking (Declaration of conformity) for users of the European Union (EU)

USER INSTRUCTIONS FCC PART 15 - RADIO FREQUENCY DEVICES (for U.S.A. users)

INTERFERENCE-CAUSING EQUIPMENT STANDARD (ICES-003 ISSUE 4) (for Canada users)

For users in countries not subject to class B regulations

Laser safety

CDRH regulations

For European users

For Denmark users

For Finland, Sweden users

For Norway users

Laser safety label

Ozone release

Acoustic noise (for European users only)

For EU member states only

2.3 Caution notations and labels

2.4 Space requirements

2.5 Operation precautions

Power source

Operating environment

Storage of printed pages

2.6 Part names and their functions

Options

Outside of machine

Inside of machine

Finisher FS-603/Punch kit PK-501

Finisher FS-501/Job separator JS-601

Saddle stitcher SD-503/Mailbin kit MT-501

Finisher FS-514/Output tray OT-601/Punch kit PK-510

Control panel

2.7 Basic operations

Turning on the machine

Turning off the machine

Automatically canceling the settings (automatic panel reset)

Automatically conserving energy (Low Power mode)

Automatically conserving energy (Sleep mode)

Power supply

2.8 Connecting to a computer

Compatible interfaces

Connection diagram

3 Setting up the printer driver

3.1 About the provided printer drivers

Printer drivers and supported operating systems

System requirements

Setting up the system

3.2 Installing the printer driver

When used with Windows

Installing the printer driver using the Add Printer Wizard

For Windows XP/Server 2003