Kompernass KH4218, KH4220, KH4221, KH4222, KH4223 User Manual
...
6
3D-ILLUMINATED
CHRISTMAS DECORATION
KH4218
KH4221
3D-ILLUMINATED CHRISTMAS DECORATION
Operating instructions
KH4219
KH4222
KH4220
KH4223
KOMPERNASS GMBH · BURGSTRASSE 21 · D - 44867 BOCHUM
www.kompernass.com
ID-Nr.: KH4218-4223-06/09-V1
3D-ILLUMINATED
CHRISTMAS
DECORATION
Read these operating instructions carefully
before using the appliance for the first time
and preserve this booklet for later reference.
Pass this booklet on to whoever might
acquire the appliance at a future date.
Intended Use
This 3D Illuminated Figure is intended exclusively for decorative purposes in domestic
indoor and outdoor areas and is not intended
for utilisation in commercial or industrial
applications. No warranty claims will be
approved for damage resulting from
improper use!
Items supplied
3D Illuminated Figure
4 Ground spikes
Operating instructions
Technical data
Operating voltage: 220 - 240 V ~ 50 Hz
Light source: 6,5 V ~ 70 mA
(= 0,455 W)
Power consumption: KH4218 = 100.8 W
KH4219 = 84 W
KH4220 = 134.4 W
KH4221 = 67.2 W
KH4222 = 100.8 W
KH4223 = 117.6 W
Protection class: IP44
(spray-water protected)
Safety class: II
Safety instructions
Risk of electric shock!
Do not permit children to handle electrical •
appliances without supervision - they
cannot correctly assess the potential
risks of injury.
Before taking the figure into use, ALWAYS •
check it for visible damage. Only connect
the rope light to electrical mains power
when it is in a faultless condition. Should
the rope light show any signs of damage,
contact the Service Centre listed below.
Do not use sharp or pointed objects,
such as wire or pegs, for securing the
figure.
The rope light may not be connected
electrically with another rope light.
Do not flex the rope light, this could •
damage it.
Avoid causing any damage to the insu-•
lation! IMMEDIATELY take the rope light
out of use should the insulation become
damaged.
Risk of potentially fatal
electrical shock!
The power cable cannot be repaired. •
In the event of damage to the power
cable, the appliance must be made
unusable and correctly disposed of.
ALWAYS first remove the plug from the •
wall socket before starting to clean the
rope light figure.
NEVER submerse the illuminated figure •
in water. Wipe it only with a slightly
damp cloth.
Position the illuminated figure in loca-•
tions at least 2 meters away from water
reservoirs or containers. Avoid locations
that could become flooded after heavy
rainfall.
- 1 -
Loading...