Page 1
UK
KOMPERNASS GMBH · BURGSTRASSE 21 · D-44867 BOCHUM
www.kompernass.com
ID-Nr.: KH3221-02/07-V1
Page 2
Powerfix
Furniture Transporter KH 3221
Operating Instructions
Page 3
Page 4
t
w
q
e
r
Page 5
KH3221
Index Page
Safety notices 4
Intended purpose 4
Description 5
Items supplied 5
Overview 5
Technical data 5
Placing furniture on the roller bases 5
Shunting furniture 6
Removing the roller bases 6
Troubleshooting 7
Cleaning 7
Storage 7
Disposal 7
Importer 7
Before using this device for the first time please read carefully through these operating
instructions and retain them for future reference. Also, pass them on to whoever
might acquire the device at a future date.
- 3 -
Page 6
KH3221
Furniture Transporter with
four roller bases
Safety notices
Risks of Injury!
• Serious injuries caused by the tipping
of loads are possible. Ensure that the
load to be shunted cannot tip over.
Arrange for a second person to assist.
Only move the load slowly.
• Injuries are possible through the
uncontrolled lowering of loads.
Always lower loads under control.
• Use the lever arm and the four roller
bases only if they are in a faultless
condition.
• Do not extend/lengthen the lever
arm.
• Ensure that all doors and drawers that
the piece of furniture might have are
secured against unintentional opening
before shunting it.
• Ensure that there are no obstacles in
the way on the shunting route.
• Only use the furniture transporter with
four roller bases on level surfaces.
• Place the roller bases under the furniture so that the roller-wheels are all
facing in the same direction.
• Do not permit children or people requiring guidance to handle the furniture transporter with four roller bases
without supervision. They may not be
able to correctly assess the potential
dangers.
Property Damage!
• Remove the contents from furniture
pieces before lifting and shunting
them.
• Incorrect placing of the lever arm may
cause damage to furniture. Always
slide the swivel head of the lever arm
under the furniture to the stop plate.
• Place the four roller bases below the
extreme corners of the furniture piece.
The furniture piece should sit completely on the four roller bases.
• Shunt larger furniture pieces with
assistance from a second person.
• Ensure that there are no obstacles
in the way on the shunting route.
• Only use the furniture transporter with
four roller bases on level surfaces.
Intended purpose
The furniture transporter with four roller
bases is only suitable for shunting furniture over short distances.
The furniture transporter with four roller
bases is NOT intended for commercial
employment.
The manufacturer accepts no liability for
damage resulting from improper or false
usage of the device.
- 4 -
Page 7
KH3221
Description
With the help of the furniture transporter
with four roller bases you can lift pieces
of furniture and place them on the roller
bases.
Subsequently, you can shunt the furniture
over short distances with a minimum of
effort.
Items supplied
Immediately after unpacking check to
ensure that all components are available
and that there are no signs of visible
damage to the furniture transporter
with four roller bases:
• 1 Lever arm with swivelling head
• 4 transport rollers with rotatable
loading surfaces
• Operating Instructions
Overview
Placing furniture on the roller bases
1. Ensure that there is sufficient space
available to work safely.
2. Remove obstacles, e.g. other furniture
items, within ca. 1,5 m from the roller
bases .
Hints:
To avoid an irregular elevation, always
place the lever arm in the middle of
the side to be lifted.
1. Hold the lever arm at the hand grip
. With this you will require the least
effort.
2. Push the swivelling head of the
lever arm under the furniture and
in the middle of it (A).
3. To lift the furniture, slowly press the
lever arm down (B).
4. Hold the lever arm pressed down.
Lever arm
Hand grip
Roller base
Rotatable loading surface
Swivelling head
Technical data
Loading per roller base: 150 kg
Weight with packaging: ca. 1,3 kg
- 5 -
B
A
Page 8
KH3221
5. Place one roller base (C) under
each raised corner of the furniture
piece.
C
C
6. To lower the furniture piece onto the
roller base , slowly lift the lever arm
(D).
D
7. Remove the lever arm .
8. Repeat the above procedure for the
opposite side of the furniture piece.
Shunting furniture
1. Adjust the roller bases so that the
wheels all face in the same direction.
2. Pull/push the furniture piece to the
desired location with the assistance
of the roller bases .
Removing the roller bases
Hint:
To avoid an irregular elevation, always
place the lever arm in the middle of
the side to be lifted.
1. Push the swivelling head of the
lever arm under the furniture and
in the middle of it.
Hint:
Hold the lever arm at the hand grip .
With this you will require the least effort.
2. To lift the furniture, slowly press the
lever arm down.
3. Hold the lever arm pressed down.
4. Remove the roller bases .
5. To lower the furniture piece, slowly
lift the lever arm .
6. Remove the lever arm .
7. Repeat the above procedure for the
opposite side of the furniture piece.
Hint:
The roller bases are each fitted with a
rotatable loading surface . With these
you can subsequently adjust the roller
bases under the furniture piece.
- 6 -
Page 9
KH3221
Troubleshooting
The furniture piece is very difficult to
shunt.
• Adjust the roller bases so that all
of the wheels are facing in the same
direction.
The furniture piece tips easily.
• Place the four roller bases under
the extreme corners of the furniture
piece. Thereby, the furniture piece
should be positioned completely over
the four roller bases .
Cleaning
Important
It is possible to damage the furniture
transporter with four roller bases
by cleaning it.
For cleanng the lever arm and the
four roller bases NEVER use spirits,
solvents or detergents that can attack
plastics.
Clean the lever arm and the four roller
bases only with a moist cloth.
Disposal
Do not dispose of the device with
normal household waste.
Dispose of the device through an approved
disposal centre or at your community
waste facility.
Observe the currently applicable regulations. In case of doubt, please contact
your waste disposal centre.
Dispose of packaging materials in
an environmentally responsible
manner.
Importer
KOMPERNASS GMBH
BURGSTRASSE 21
D-44867 BOCHUM
www.kompernass.com
Storage
In each of the roller bases there is a
hole. With these holes the roller bases
can be hung for example on a pinboard
for hand tools.
The furniture transporter with four roller
bases can also be stored in its original
packaging.
- 7 -
Loading...