Kompernass kh 2230 User Manual
Before using your bread-maker …
In order to ensure the safe transport of your new automatic bread-maker, the
unit contains transport safety devices that must be removed before use.
Unpack the unit and remove the outer packaging. Then place the
FIG 1.
unit on a flat and stable surface.
1. Now open the baking chamber of the unit. (FIG. 1.)
2. Remove the cardboard spacer inserts. (FIG. 2.)
3. Tilt the two baking tins forward or backward slightly and lift them
out of the bread-maker. (FIG. 3.)
4. Below the tins, there are four pairs of silicon pads in recesses in
the base, as shown at the left. (FIG. 4. and FIG. 5.)
FIG 2.
FIG 3.
5. Grasp the silicon pads with your fingers and remove them. You
may need to loosen the silicon pads, e.g. with the aid of a toothpick. (FIG. 4.)
6. The removed silicon pads (8 pieces) are shown in FIG. 6..
FIG 6.
(8 pieces)
FIG. 5. Overhead view of the
open bread-maker
Silicon pads
FIG 4.
FIG 5.
Silicon pads
KH 2230
OPERATING MANUAL
IMPORTANT SAFETY INSTRUCTIONS
FOLLOW THESE SAFETY INSTRUCTIONS CLOSELY:
• Read all instructions thoroughly.
• Do not touch any hot surfaces. Use handles, knobs or a potholder.
• Do not close or clog the steam vent openings. A steam outlet to a certain degree is normal. Do not
cover the steam vent openings.
• To avoid the danger of electric shock, do not immerse the lead, plug or any other part of this bread
machine in water or other liquids.
• Electric appliances should not be used by or near children unless they are under close supervision.
• Unplug the power supply lead when the appliance is not in use, or before cleaning. Allow it to cool
down before putting on or taking off any parts.
• Do not use or operate the appliance with a damaged lead or plug or after the appliance
malfunctions or has been damaged in any way. Return the appliance to the nearest authorized
service facility for inspection, maintenance and repair.
• The use of accessory attachments not recommended or sold by the manufacturer may cause injuries.
• Do not use the bread machine outdoors.
• Do not let the power supply lead hang over sharp edges or come into contact with hot surfaces.
• Do not place the appliance on or near any hot gas, electric burners, or a heated oven.
• Extreme caution must be used when moving the appliance with hot or liquid contents.
• To disconnect the appliance from the mains, press STOP and then remove the plug from the socket.
Always pull on the plug itself and never on the lead.
• Do not use the bread machine for any other than the intended purpose.
• Avoid contact with moving parts while they are operating.
• Ingredients must be poured only into the baking tins. This must be done before placing the baking
tins into the appliance.
• Do not use the appliance in the vicinity of explosive and/or infl ammable gases.
• The appliance is intended for household use only and not for commercial or industrial use.
• To avoid damaging the machine, do not place the baking tin or any object upon the unit.
• Do not clean with scouring pads. Pieces can break off the pad and touch electrical parts, creating
the risk of electric shock.
• Do not use the bread machine for storage purposes or insert any utensils, as they may cause a
fi re or electric shock.
• The power-supply lead quite short so as to reduce the risk of becoming entangled with or tripping
over keep it. An extension lead may be used, provided that the necessary caution is exercised.
• If an extension lead is used, make sure that the specifi ed electrical rating of the extension lead is at
least as high as the electrical rating of the appliance.
• The lead should be arranged in such a way that nobody can trip over it accidentally and children
cannot pull on it.
3
TABLE OF CONTENTS
IMPORTANT SAFETY INSTRUCTIONS
TABLE OF CONTENTS
BFEORE YOUR FIRST USE
ABOUT YOUR BREAD MACHINE
KNOW YOUR BREAD MACHINE
CONTROL PANEL
SETTINGS
USING YOUR BREAD MACHINE
USING THE TIMER
MEINTENANCE AND CLEANING
HELPFUL INFORMATION ABOUT INGREDIENTS
RECIPE TIPS
BREAD MACHINE CYCLE TIMES
RECIPES
QUESTIONS AND ANSWERS / TROUBLESHOOTING
BEFORE FIRST USE
Before fi rst usage, please read this Instruction Manual thoroughly and keep it handy for future
reference. Please pay particular attention to the safety instructions.
Carefully unpack the bread machine and remove all packaging materials. To remove any dust that
may have accumulated during packing, wipe the baking tins, kneading blades and outer surface of
the bread machine with a clean, damp cloth. Do not use scouring pads or any abrasives to clean any
part of the machine.
ABOUT YOUR BREAD MACHINE
• Your new bread machine is able to bake two 1-pound loaves of bread.
• A special EXPRESS-setting makes it possible to complete the bread-making process in a shorter time.
This applies to special recipes only.
• The Fruit and Nut Beep signals at the time when you can add ingredients, such as fruits, nuts or
chips. Instead of being chopped by the kneading blade, the ingredients will maintain their shape
and texture. If you use the TIMER to delay baking, you may add all the ingredients at once and
bypass the function. However, the fruits, nuts or chips may get somewhat chopped in this case.
• The colour at the end of the bread crust can be adjusted according to your personal preference.
• The TIMER enables you to program the end of the baking process.
• The VIEWING WINDOW allows you to observe the bread-making process.
• The KEEP WARM function prevents the bread from getting soggy by keeping the fi nished bread
warm up to an hour after the completion of the baking process. This function stops when the unit
is turned off or unplugged.
• The machine has got a POWER LOSS MEMORY, which resumes the interrupted cycle after a short term power loss.
• After unplugging the unit and letting it cool off, remove any spilled ingredients or crumbs from the
baking chamber, using a damp sponge or cloth.
IMPORTANT
results, accurate measuring of ingredients is vital. Do not put larger quantities than recommended into
the baking tin, as this may produce poor results and even damage the bread machine.
: Always add the ingredients exactly in the order specifi ed in the recipe. To obtain the best
4
KNOW YOUR BREAD MACHINE BIFINETT KH 2230
1. Lid
2. Lid Handle
3. Viewing Window
4. Air Vents
5. Baking Tin
6. Baking Chamber
7. Control Panel
8. Main Housing
9. Power Flex
10. Power Plug
11. Drive Shaft
12. Kneading blade
CONTROL PANEL OF THE BIFINETT KH 2230
Note
: Please peel off the plastic sticker on the control panel before its fi rst use.
Note
: When using the touch pad controls, be sure to press the pad until you hear a beep.
WINDOW-DISPLAY
• Shows the MENU number(s) selected.
• Shows the CRUST COLOUR selected.
• Shows minute-by-minute baking time countdown.
• Shows the DELAY BAKING TIME selected.
TIMER
• Use this button when setting the TIMER to delay baking.
• Press the
• The arrows move the time up or down in 10-minute intervals. Keep pressing the buttons for
faster movement. The TIMER function is not available on some cycles; check the Bread Machine
Cycle Times.
MENU
• Press this button to select the cycle or cycle combination of your choice. The time needed by the
selected cycle to complete its process appears in the display.
COLOUR
• By pressing this button, you can either select the desired crust colour or, alternatively, activate the
Express mode.
• Choose from Light, Medium or Dark, or activate the Express mode.
START/STOP
• Press to start the operation of the machine or to begin TIMER countdown for delayed completion.
• Keep pressing this button until you hear a beep to stop the operation of the
machine or to cancel a TIMER setting.
Note
and buttons to set the timer for delayed completion.
: Do not press STOP when just checking the progress of bread
5
Loading...