UK
KOMPERNASS GMBH · BURGSTRASSE 21 · D-44867 BOCHUM
www.kompernass.com
ID-Nr.: KH25-03/07-V2
Citrus Press KH 25
Operating Instructions
q
w
e
r
t
y
u
i
o
a
s
Index Page
Intended use 4
Technical Data 4
Items supplied 4
Important safety instructions 4
Appliance description 5
Set-up and assembly of the appliance 5
Juice extraction 6
Emptying 6
Disassembly 6
Cleaning and Care 7
Storage 7
Disposal 7
Warranty & Service 7
Importer 7
Read the operating instructions carefully before using the appliance for the first time
and preserve this booklet for later reference. Pass the manual on to whoever might
acquire the appliance at a later date.
- 3 -
Citrus Press KH 25
Important safety instructions
Intended use
The appliance is intended for the extraction of juices from citrus fruits such as
oranges and lemons. Only foodstuffs
may be processed with the appliance.
All other usages or modifications are
regarded as contrary to the operating
instructions and contain a great risk of
accidents.
The manufacturer accepts no liability
for damage(s) resulting from usage that
is contrary to these instructions.
Not for commercial use.
Technical Data
Mains voltage: 220-240 V~ 50 Hz
Rated output: 25 W
Items supplied
Citrus Press
Large squeezing cone
Small squeezing cone
Fruit pulp sieve (2 parts)
Operating instructions
Warranty card
To avoid potentially fatal electric shocks:
• The rating of the local power supply
must tally completely with the details
given on the rating plate of the appliance.
• Arrange for defective power plugs
and/or cables to be replaced at once
by qualified technicians or our Customer
Service Department.
• Arrange for damaged or malfunctioning appliances to be inspected and/or
repaired by a qualified specialist or
the Customer Service Department as
soon as possible.
• Do not expose the appliance to rain
and never use it in a humid or wet
environment. Ensure that the power
cable never becomes moist or wet
during operation.
To avoid the risks of fire and burn
injuries:
• This appliance is not suitable for
children or for those whose physical,
sensorial or intellectual faculties prevent the safe usage of the appliance
without support or supervision. Children should be supervised to ensure
that they do not play with the appliance.
• Provide for a safe and slip-free positioning of the appliance.
• Ensure that the power plug is easily
accessible in the event of danger,
and that there is no danger of anyone
tripping over the power cable.
- 4 -
Using the appliance safely:
• In the event of danger, immediately
remove the power plug from the wall
socket.
• Never use the appliance for purposes
other than those for which it was
designed.
• Remove the power plug from the wall
socket when the appliance is not in
use, when you remove parts and
before cleaning the appliance.
• Do not use the appliance outdoors.
Appliance description
q Lid
w Large squeezing cone
e Small squeezing cone
r Upper fruit pulp sieve
t Fruit pulp regulator
y Lower fruit pulp sieve
u Juice collector
i Drive axle
o Power cable with power plug
a Appliance plinth
s Power cable storage
Note: Rinse all removable compo-
nents thoroughly before the first
usage of the appliance (see chapter
"Cleaning and care").
3. Place the juice collector
axle
iof the appliance plinth a and
turn it clockwise as far as it will go.
4. Place both parts of the fruit pulp sieve
u on the drive
r/y into each other so that the fruit
pulp regulator
the recess. Both parts must audibly
engage.
5. Place the assembled fruit pulp sieve
tprotrudes through
r/y on the juice collector u. The fruit
pulp regulator
and catch in the rabbet on the grip.
6. Press the small squeezing cone
the drive axle
t must lie on the grip
eon
i so that it engages.
Note: If you want to press oranges
or other larger fruits, place the large
squeezing cone
squeezing cone
lobes of the small squeezing cone
engage in the recesses of the large
squeezing cone
w over the small
e. Ensure that the
e
w.
Set-up and assembly of the appliance
Important: Ensure that the power
plug is not in the power socket before
assembling the appliance.
1. Unwind the power cable
from the cable storage
it in the lateral recess on the appliance
plinth
a.
2. Place the appliance plinth
and slip-free surface.
o completely
s and secure
a on a level
7. Insert the power plug into a wall
power socket. The appliance is now
ready for use.
- 5 -
Juice extraction
Emptying
1. Adjust the fruit pulp regulator t, by
sliding it, so that the slits in the fruit
pulp sieve
other if you wish to have fruit juice
with fruit pulp. Adjust the fruit pulp
regulator
slits in the fruit pulp sieve
lying above each other if you do not
wish to have fruit juice with fruit pulp.
2. Cut the fruits in half
(orange, lemon etc.)
3. Press the halved fruit lightly onto the
squeezing cone
switches itself on automatically as
soon as the squeezing cone
pressed down.
4. Apply pressure at various parts of the
fruit rind with your fingers. Thereby
the juice will be evenly squeezed out
of the fruit.
5. When no more juice flows from the fruit, stop applying pressure to the squeezing cone
6. Press the squeezing cone
repeatedly to loosen it, until it turns
in the opposite direction.
7. When no more juice flows from the
fruit, stop applying pressure to the
squeezing cone
stops. Remove the fruit skin from the
squeezing cone
8. Continue similarly with further fruithalves until you have squeezed out
the desired volume of fruit juice. The
current volume squeezed can be read
off from the scale on the side of the
juice collector
r/y lie exactly above each
t , by sliding it, so that the
r/y are not
w/e. The appliance
w/e is
w/e. The appliance stops.
w/e down
w/e. The appliance
w/e.
u.
Important: Remove the power plug
from the wall socket when you empty
the fruit pulp sieve or the juice collector
u.
• Turn the juice collector
wise until the perceptible resistance
desists. You can now lift it from the
drive axle
i and pour the juice out.
Disassembly
If you wish to disassemble the Citrus Press,
e.g. for the cleaning of it, proceed as
follows:
1. Remove the power plug from the wall
socket
o.
2. Remove the squeezing cone
3. Remove the fruit pulp sieve
Press the hook on the underside of the
upper fruit pulp sieve
same time exert light pressure on the
fruit pulp sieve
allow themselves to be pressed apart.
4. Turn the juice collector
wise until the perceptible resistance
desists. You can now lift it from the
drive axle
t. The components
a.
u anti-clock-
w/e.
r/y.
r inwards. At the
u anti-clock-
Note: When pressing out juice, do not
exceed the 600 ml volume marking
on the scale of the juice collector
u.
- 6 -
Cleaning and Care
Storage
Important: Always remove the
power plug from the wall socket
before cleaning the appliance.
Important: To avoid receiving an
electrical shock, NEVER submerse
the appliance plinth
or other fluids.
• Disassemble the Citrus Press as described
in the chapter "Disassembly".
• Clean the appliance plinth
a slightly moistened cloth.
• Clean all other removable parts in a
warm mild-detergent solution and
dry them carefully.
• To clean the fruit pulp sieve
take it apart and clean it with a dishwashing brush under running water.
a in water
a only with
r/y,
Note: Do not use aggressive deter-
gents to clean the appliance.
The appliance and its components
may not be cleaned in a dishwasher
or in boiling water.
If you do not intend to use the appliance
for an extended period, wrap the power
cable
o around the power cable storage
s, directing the end of the cable through
the lateral recess on the appliance plinth
Assemble the appliance completely and
close the lid.
Store the appliance at a clean and dry
location.
Disposal
Do not dispose of the appliance
in your normal domestic waste.
Observe the currently applicable regulations. In case of doubt, please contact
your waste disposal centre.
Dispose of the packaging materials
in an environmentally responsible
manner.
Warranty & Service
a.
The warranty conditions and the service
address can be found on the supplied
warranty card.
Importer
KOMPERNASS GMBH
BURGSTRASSE 21
D-44867 BOCHUM
www.kompernass.com
- 7 -
Loading...