KOMPERNASS CR 5 A2 User manual [gb]

Download

DashboarD Camera Cr 5 a2

DashboarD Camera

Operating instructions and safety instructions

DashCam

Betjeningsvejledning og sikkerhedsanvisninger

Caméra embarquée

Mode d'emploi et consignes de sécurité

DashCam

Bedienungsanleitung und Sicherheitshinweise

IAN 275078

DashCam

Gebruiksaanwijzing en veiligheidsvoorschriften

Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device.

Før du læser, vend siden med billeder frem og bliv bekendt med alle apparatets funktioner.

Avant de lire le mode d’emploi, ouvrez la page contenant les illustrations et familiarisez-vous ensuite avec toutes les fonctions de l’appareil.

Vouw vóór het lezen de pagina met de afbeeldingen open en maak u vertrouwd met alle functies van het apparaat.

Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend mit allen Funktionen des Gerätes vertraut.

GB / IE Operating instructions and safety instructions Page 1 DK Betjeningsvejledning og sikkerhedsanvisninger Side 27 FR / BE Mode d'emploi et consignes de sécurité Page 53 NL / BE Gebruiksaanwijzing en veiligheidsvoorschriften Pagina 79 DE / AT / CH Bedienungsanleitung und Sicherheitshinweise Seite 105

Contents

Introduction ...................................................2

Information concerning these operating instructions ...............................2

Notes on trademarks .......................................................2

Intended use .............................................................2

Warnings used ............................................................3

Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Basic safety guidelines ......................................................4

Possible infringements of the rights of third parties ................................6

Controls.......................................................7

Contents of package and transport inspection ...................................8

Disposal of packaging materials ..............................................8

Initial operation ................................................9

Inserting/removing the microSD card ..........................................9

Mounting the camera on the windscreen ......................................10

Providing electric power ...................................................10

Handling and operation ........................................11

Switching on and oﬀ, making settings .........................................11

Basic settings ............................................................11

Setup menu ...........................................................11

Video standby mode ...................................................14

Start / end recording ....................................................14

Photo standby .........................................................17

Taking photos .........................................................17

Playback mode ........................................................18

Showing recordings on an external monitor ....................................21

Transferring recordings to a computer .........................................22

Resetting the device .......................................................22

Changing the fuse ........................................................22

Cleaning .....................................................23

Troubleshooting...............................................23

Fault causes and rectiﬁcation ................................................23

Storage / Disposal .............................................24

Storage when not in use ...................................................24

Disposal of the device .....................................................24

Appendix ....................................................24

Notes on the EU-Declaration of Conformity ....................................24

Technical data ...........................................................25

Warranty ...............................................................26

Service .................................................................26

Importer ................................................................26

CR 5 A2

GB│IE

│

1 ■

Introduction

Information concerning these operating instructions

Congratulations on the purchase of your new device. You have selected a high-quality product. The operating instructions are part of this

product. They contain important information on safety, usage and disposal. Before using the product, familiarise yourself with all handling and safety guidelines. Use the product only as described and for the range of applications speciﬁed. Keep these operating instructions as a reference and store them near the product. Please pass on all documentation incl. these operating instructions on to any future owner(s) if you sell this product or give it away.

This documentation is subject to copyright protection. Any copying or reproduction, including extracts thereof, and the reproduction of

images (even in a modiﬁed state), is permitted only with the written authorisation of the manufacturer.

Notes on trademarks

USB® is a registered trademark of USB Implementers Forum, Inc. All other names and products may be trademarks or registered trademarks of their

respective owners.

Intended use

This cockpit recorder is an information electronics device designed to record digital photos and videos in motor vehicles, particularly while on the road. It is not intended for any other use. This device is not intended for use in commercial or industrial environments. The manufacturer accepts no responsibility for damage caused by failure to observe these instructions, improper use, incompetent repairs, making unauthorised modiﬁcations or for using unapproved replacement parts. The risk shall be borne solely by the user.

■ 2│GB

│

CR 5 A2

Warnings used

The following warnings are used in these operating instructions:

DANGER

A warning at this hazard level indicates an imminently hazardous situation.

If the dangerous situation is not avoided, serious injuries or death may follow.

► Follow the instructions in this warning to avoid the risk of serious injury or death.

WARNING

A warning at this hazard level indicates a potentially hazardous situation.

Failure to avoid this hazardous situation could result in physical injury.

► Follow the instructions in this warning to prevent physical injury.

CAUTION

A warning at this hazard level indicates potential material damage.

Failure to avoid this situation could result in material damage.

► Follow the instructions in this warning to prevent material damage.

NOTE

► A note indicates additional information that eases device handling.

CR 5 A2

GB│IE

│

3 ■

Safety

In this section, you will receive important safety advice relating to device handling. The device complies with the statutory safety regulations. Improper use may result in personal injury and material damage.

Basic safety guidelines

To ensure safe handling of the device, follow the safety guidelines set out below:

■ Prior to use, check the device for visible, external damage. Do not operate an

device that has been damaged or dropped.

■ If the cables or connections are damaged, have them replaced by an authorised

specialist or customer service.

■ All repairs must be carried out by authorised specialist companies or by the

Customer Service department. Failure to make proper repairs can put the user at risk. Warranty entitlement will also lapse.

■ Defective components must always be replaced with original replacement parts.

Compliance with the safety requirements can only be guaranteed by using these replacement parts.

■ Never open the device, and never carry out any repairs yourself.

■ Protect the device from moisture, spray and dripping water and penetration by

liquids.

■ Never subject the device to extreme heat or humidity. This applies especially to

storage in a car. If the car is stationary for long periods and the weather is warm and sunny, temperatures of more than 40°C can arise in the car interior and the glove compartment. Remove electrical and electronic devices from the vehicle.

■ When ﬁtting the camera and accessories, ensure that it does not interfere with

the steering, braking or the operation of other vehicle systems (such as airbags) and does not restrict your ﬁeld of view when driving, in accordance with the Road Vehicles (Construction and Use) Regulations 1986.

■ Ensure that the suction cup does not extend further than 4 cm into the wiping ran-

ge of the windscreen wipers, and that not more than 1 cm of it is installed in the area directly above the steering wheel (see also section Mounting the camera on the windscreen).

■ Make sure the screen is switched oﬀ while you are driving.

To do this, select the setting „Auto display oﬀ“ in the setup menu and set the time period to „1 min“. Wait until the screen has switched oﬀ before you start driving.

DANGER

► Do not place the car cradle in or near the expansion area of the airbag, since

the cradle could be ﬂung through the vehicle interior in the event of airbag deployment and cause serious injuries.

■ 4│GB

│

CR 5 A2

WARNING

► The camera should not be mounted in such a way that you or other passengers

could be hit by the camera in the event of an accident. This could cause serious injury.

■ Children and people who, due to their physical, intellectual, motor or sensory ca-

pabilities, are incapable of operating the device safely may only use the device under the supervision or direction of a responsible person.

DANGER

► Packaging materials must be kept out of the reach of children and should not

be used as playthings. Risk of suﬀocation.

■ Do not allow children to use the device unless they are being supervised. Child-

ren are not always able to correctly recognise potential dangers. Children must not play with the appliance.

■ Do not place any objects on the device.

■ Do not operate the device close to open ﬂames (e.g. candles).

■ If you notice a burning smell or smoke coming from your device, disconnect

it from the power supply immediately.

WARNING

► Under no circumstances should the smoke be inhaled as this could be harmful

to your health.

■ Check regularly to ensure that the suction cup is securely attached to the wind-

screen. This is especially important in areas where extreme outside temperature ﬂuctuations occur.

■ All of the applicable laws in your location must be observed. The use of a cock-

pit camera is banned in some countries and may constitute a criminal oﬀence. The camera should not be operated while driving. Traﬃc safety must ALWAYS take priority whilst driving. Use this device only if it is not like to lead to any hazard during driving situations.

CR 5 A2

DANGER

► The device contains a lithium-ion battery. Therefore, the device must not be

thrown into the ﬁre. There is a risk of explosion!

■ Do not exert any pressure on the display. If it should break, touching the sharp

edges could cause injury.

GB│IE

│

5 ■

Possible infringements of the rights of third parties

Please note the following when using the cockpit camera:

In principle, everyone has the right to pictures of themselves. According to copyright law, pictures of people may only be published without their permission if the aﬀected person appears merely as an incidental feature in a landscape or other location. The question as to whether a person is merely an incidental feature must be ascertained on a case by case basis.

Protection of privacy

The privacy of others may not be infringed by any recorded images. Do not set up the camera pointing at the garden or an entrance of a neighbouring residence, even if these locations are easily visible from your own vehicle or from public places. This does not a constitute a right to publish these views.

Personal determinability

Personal determinability exists when it can be established that a certain person was at a certain location at a certain time. This identiﬁcation can be made by means of an identiﬁer related to a speciﬁc person, e.g. a car number plate. Personal determinability of persons is to be avoided.

Surveillance cameras at the workplace

Surveillance at the workplace is subject to particularly strict legislation in Germany. Employers should not use surveillance cameras in the workplace in any cases where this could lead to a possible infringement of legal rights.

The respective legal requirements of the country in which the camera is being used should always be observed to avoid possible infringements of the rights of third parties. Due to the possible violation of third party rights, it is illegal to publish recordings featuring strangers or vehicle license plates without authorisation, e.g. on the Internet. The recordings may only be used for providing evidence in the event of an accident.

■ 6│GB

│

CR 5 A2

Controls

(For illustrations see the fold-out page)

Figure A:

Cradle with suction cups Locking lever Knurled screws for three-dimensional locking

Figure B:

Camera lens / ▲ button / ▼ button MENU button MODE button Microphone Mini-USB port Reset opening Loudspeaker Infrared LEDs

Figure C:

Operating display Cover Mini-HDMI connection microSD card slot Screen

CR 5 A2

Figure D:

Thread for the tripod mount On/Oﬀ button / button to start/stop the video recording, to trigger a photo or

call up menu items

Illustration E:

USB socket for power supply via the in-car adaptor Operating light 12/24 V car adapter USB to mini-USB cable Operating instructions

GB│IE

│

7 ■

Contents of package and transport inspection

Please check the contents of the package (see fold-out page). The following components are included in delivery:

● Cockpit recorder CR 5 A2

● Cradle with suction cups

● 12/24 V car adapter

● USB to mini-USB cable

● These operating instructions

♦ Remove all the parts of the device and the operating instructions from the

packaging and then check the contents for completeness and visible damage (see fold out page).

♦ Remove all packing material and the protective ﬁlm from the screen

camera lens .

NOTE

► If the consignment is incomplete or damaged due to defective packaging or

carriage, contact the Service hotline (see the Service section).

Disposal of packaging materials

The packaging protects the device from damage during carriage. The packaging materials have been selected in accordance with environmentally congruent and disposal-speciﬁc parameters and are, therefore, recyclable.

Returning the packaging to the materials cycle conserves raw materials and reduces the amount of waste that is generated. Dispose of packaging materials that are no longer needed in accordance with applicable local regulations.

and

NOTE

► If possible, keep the original packaging of the device during the warranty

period, so that the device can be packed properly for returning in the event of a warranty claim.

■ 8│GB

│

CR 5 A2

Initial operation

Inserting/removing the microSD card

CAUTION

► Do not install or remove the microSD card (not supplied) while the device is

switched on. This can cause loss of data on the microSD card.

♦ Insert a microSD card into the microSD card slot

are facing toward the display. Press the microSD card in until it locks into place.

♦ To remove the microSD card, gently press the edge of the microSD card. The

microSD card is ejected slightly and can be removed from the device.

NOTE

► The camera does not have any internal memory. Therefore, recordings can only

be made with a memory card inserted.

You can ﬁnd the maximum recording time depending on the storage capacity of the microSD card and the selected resolution in the following table.

Resolution

1080p

720p

480P

Storage capacity of the

microSD card

4 GB approx. 0 hrs. 19 min.

8 GB approx. 0 hrs. 41 min. 16 GB approx. 1 hr. 21 min. 32 GB approx. 2 hrs. 41 min.

4 GB approx. 0 hrs. 32 min.

8 GB approx. 1 hr. 06 min. 16 GB approx. 2 hr. 12 min. 32 GB approx. 4 hrs. 22 min.

4 GB approx. 0 hrs. 47 min.

8 GB approx. 1 hr. 37 min. 16 GB approx. 3 hrs. 12 min. 32 GB approx. 6 hrs. 23 min.

so that the golden contacts

Approximate recording time

CR 5 A2

GB│IE

│

9 ■

Mounting the camera on the windscreen

1) Screw the cradle into the thread of the camera Position the suction cup on the windscreen. Ensure that the suction cup is pressed on ﬂat.

2) Place the suction cup ﬁrmly against the windscreen and press the suction cup locking lever

downwards towards the windscreen. This creates suction, and the suction cup is pulled tightly against the windscreen. Pull the locking lever in the opposite direction to release the suction cup from the windscreen. The suction cup has a tab at the side, which makes it easier to remove.

3) After attaching the camera with the suction cup on the windscreen, loosen the knurled screws wishes.

4) Once you have found the desired position and orientation, retighten the knurled screws

► The camera must be positioned so that the driver's ﬁeld of vision is not

obscured.

► Ensure that the suction cup does not extend more than 4 cm into the wiping

range of the windscreen wipers (light grey area), and that not more than 1 cm of it is installed in the area directly above the steering wheel (grey area) (see diagram).

and adjust the camera as per your

CAUTION

Providing electric power

CAUTION

► Use only the supplied car adapter to power your device.

1) Connect the car adapter lighter). The operating light on the car adapter indicates operational readiness when the socket is live.

■ 10│GB

│

to your vehicle's on-board power supply (cigarette

CR 5 A2

2) Connect the supplied mini-USB cable to the USB port on the car adapter

and the USB socket of the camera. As soon as the camera is powered by

the on-board power supply, the video recording starts and the operating display

lights up red. Once the internal backup battery is charging, the battery

charger symbol appears on the screen .

CAUTION

► In vehicles in which the cigarette lighter also works with the ignition switched oﬀ,

the device must be disconnected from the cigarette lighter socket after use. Otherwise, the vehicle battery may be discharged over a long period of time, since the device also uses power when it is idle. The vehicle's engine will no longer start.

► In vehicles in which the cigarette lighter is not switched oﬀ, the recording is not

interrupted. In this case, you will need to switch oﬀ the camera manually.

Handling and operation

In this chapter you will receive important information for the handling and operation of the device.

Switching on and oﬀ, making settings

Press the on/oﬀ button to switch on the device. The camera image is displayed on the screen . The device is now in video standby mode.

To switch oﬀ the device, press and hold the on/oﬀ button

for 3 seconds.

Basic settings

Setup menu

To make the basic settings for the device in the setup menu, press the MENU button

NOTE

Then you can use the ▲▼ buttons entry and then call up this menu item with the / button . To exit the activated menu item without making a change, press the MODE button . Below right, the current menu board as well as the total number of menu boards is shown. To close the menu, press the MENU button .

CR 5 A2

followed by the MODE button . The setup menu opens:

Default settings

► When calling up the menu, you must ﬁrst press the ▼ button

selection bar on the ﬁrst entry.

/ to move the selection bar to the desired

to place the

GB│IE

│

11 ■

Time & date

If you access this menu option, you can then use the ▲▼ buttons whether the recordings are to be made with or without a date stamp. Select "Time & date stamp on" to activate ths function or "Time & date stamp oﬀ" to deactivate it.

To set the current date, call up "Set time & date". Then use the ▲▼ buttons the current year. Press the MODE button to use the ▲▼ buttons / to set the hours of the current time. Press the MODE button to use the ▲▼ buttons / to set the minutes. Press the MODE button to use the ▲▼ buttons / to set the seconds. Press the MODE button to use the ▲▼ buttons / to set the required date format. The options are „YY/MM/DD“ for the two-digit date in the order „year/ month/day“, „MM/DD/YY“ for the two-digit date in the order „month/day/year“ and „DD/MM/YY“ for the two-digit date in the order „day/month/year“. Press the MODE button to use the ▲▼ buttons / to set the day. Press the MODE button to use the ▲▼ buttons / to set the month. Conﬁrm your selection by pressing the / button . Afterwards, the display will return to the list of menu items.

Auto Power Oﬀ

If you access this menu option, you can the use the ▲▼ buttons whether the device switches oﬀ automatically after "1 Min", "3 Min" or "5 Min" of inactivity. If you select "Oﬀ", the device will not switch oﬀ automatically. Conﬁrm your selection by pressing the / button . Afterwards, the display will return to the list of menu items.

Impact sensor

If you access this menu option, then you can use the ▲▼ buttons sensitivity of the built-in impact sensor: "Very low", "Low", "Middle", "High" and "Very high" are the available options. This feature automatically protects the current video recording when it recognises an impact, which indicates an accident event, from being overwritten during a loop recording. The symbol appears on the screen and the current recording is protected from deletion. Conﬁrm your selection by pressing the

/ button . Afterwards, the display will return to the list of menu items.

/ to select

/ to set

/ to choose

/ to select the

Beep sound

If you access this menu option, you can then use ▲▼ buttons the device emits an acoustic signal when pressing the device's buttons as well as the on/oﬀ function ("On"), or not ("Oﬀ"). Conﬁrm your selection by pressing the / button . Afterwards, the display will return to the list of menu items.

NOTE

► The countdown and the shutter sound are played for a self-timer capture even if

the sounds are deactivated.

■ 12│GB

│

/ to select whether

CR 5 A2

Auto display oﬀ

If you access this menu option, you can then use the ▲▼ buttons period after which the display automatically switches oﬀ: "1 Min", "3 Min" and "5 Min" are the available options. Select "Display always on" if the display is to remain on permanently. To reactivate the display after it has been automatically switched oﬀ, press one of the ▲▼ buttons / , the MODE button or the / button .

Language

If you access this menu option, you can then use the ▲▼ buttons "English" or "Deutsch" as the language for the on-screen menus. Conﬁrm your selection by pressing the / button . Afterwards, the display will return to the list of menu items.

Display icon rotation

If you access this menu option, you can then use the ▲▼ buttons whether the display icons and the menus are to be displayed in the normal mode ("Oﬀ") or rotated by 180° ("On"). The best selection depends on how you have mounted the camera.

Format memory card

If you access this menu option, then you can use the ▲▼ buttons inserted microSD card. This process will irretrievably delete all the data on the microSD card, even data which is write protected. To format the card, use the ▲▼ buttons /

to select "OK" and then press the / button .

The formatting process will begin.

Default settings

If you access this menu option, you can then reset all the settings of the device to the factory defaults. Use the ▲▼ buttons tion with the / button . Afterwards, the display will return to the list of menu items. All of the previously made settings will be reset to the factory settings.

To close the setup menu, press the MENU button

/ to select "OK" and conﬁrm your selec-

/ to select the

/ to select

/ to format the

CR 5 A2

GB│IE

│

13 ■

Video standby mode

In video standby mode, the screen shows the following overview:

A – displays the remaining recording time depending on resolution and

available storage space B – current video resolution C – symbol to indicate an inserted microSD card D – battery charge level of the internal battery E – date display (only when the "Time & date stamp" is activated) F – time display (only when the "Time & date stamp" is activated) G – symbol for motion detection (only visible if the function is activated) H – symbol for a loop recording as well as its length in minutes (here 3 minutes) I – display for exposure correction J – symbol for video standby K – red dot ﬂashes during recording L – symbol for a write-protected ﬁle

Start / end recording

Press the / ▲ button repeatedly as required to zoom into the subject. Hold down the button for fast zoom. You can use the zoom out. Press the / button to start the video recording. During the video recording the operating display blinks green (battery operation only). Press the button again to stop the recording.

If you press the MODE button the current recording will be write-protected.

NOTE

► As soon as the camera is connected to the vehicle's power supply, the recording

starts. To stop the recording, press the

■ 14│GB

│

during recording, the symbol is displayed and

/ ▼ button in the same way to

/ button .

CR 5 A2

If you now press the MENU button in video standby, the following menu opens:

Motion detection

Using the ▲▼ buttons / you can move the selection bar to the desired entry and then call up this menu item with the / button . To exit the activated menu item without making a change, press the MODE button . Below right, the current menu board as well as the total number of menu boards is shown. If the lowest menu item on a menu board is selected which leads to a further menu board, press the ▼ button to jump to the ﬁrst entry on the following menu board. To close the menu, press the MENU button .

Resolution

If you access this menu option, you can then set the the video resolution: "1920x1080P (HD)", "1280 x 720P" and "640 x 480P" are the options available. Use the ▲▼ buttons with the / button to return to the list of menu items.

Exposure

If you access this menu option, you can then adjust the video exposure in three steps upwards (from +1 to +3, brighter), or downwards (from –1 to –3, darker). When the setting is set to "0" there is no exposure compensation. Use the ▲▼ buttons select the desired video exposure compensation and conﬁrm your selection with the

/ button to return to the list of menu items.

/ to select the desired resolution and conﬁrm your selection

/ to

CR 5 A2

Video length

If you access this menu option, you can then set the length of the loop for the video recording: "3 Min", "5 Min", "10 Min" or "Loop recording oﬀ" are the available options. Use the ▲▼ buttons and conﬁrm your selection with the / button to return to the list of menu items.

Remember that the microSD card used must have a suﬃcient capacity to record the desired length of loop in the video resolution set. If you select "Loop recording oﬀ" the recording ends when you reach the capacity of the microSD card. When the end of the recording is reached, the device will start a new recording with the length set.

If the capacity of the memory card is not suﬃcient for the set duration, the recording will be aborted. Reduce the length of the loop recording or use a memory card with a greater capacity.

/ to select the desired value for the loop recording

GB│IE

│

15 ■

Motion detection

If you access this menu option, you can then use the ▲▼ buttons deactivate this function. Conﬁrm your selection with the / button to return to the list of menu items.

When this function is activated, the device will automatically stop the video recording when no moving images are detected. If the device again detects movements, the device will automatically begin recording again. If the function is deactivated, the device does not stop recording if no motion is detected.

NOTE

► You should only activate this function while the vehicle is parked if you want

to automatically ﬁlm a break-in attempt or to record the other vehicle after a collision.

► The initial recording with this function must be started manually.

Audio recording

If you access this menu option, you can then use the ▲▼ buttons deactivate audio recording via the built-in microphone. Conﬁrm your selection with the / button to return to the list of menu items.

/ to activate or

■ 16│GB

│

CR 5 A2

Photo standby

With the menu closed, press the MODE button during video standby to switch to photo standby. The device then displays the following overview on the screen

A – displays the remaining number of photos that can still be taken depending on

resolution and available storage space B – current photo resolution C – symbol to indicate an inserted microSD card D – battery charge level of the internal battery E – date display (only when the "Time & date stamp" is activated) F – time display (only when the "Time & date stamp" is activated) G – symbol for self-timer (here 5 seconds: only visible if the function is activated) H – symbol for exposure correction I – display for photo standby J – display for continuous advance function (only visible if feature is enabled)

Taking photos

CR 5 A2

Press the / ▲ button repeatedly as required to zoom into the subject. Hold down the button for fast zoom. You can use the out. Press the / button to take a photo.

If you now press the MENU button

/ ▼ button in the same way to zoom

in photo standby, the following menu opens:

GB│IE

│

17 ■

Resolution

If you access this menu option, then you can use the ▲▼ buttons desired resolution for your photos: "12MP (interp.*)", "7MP (interp.*)", "5MP", "3MP", "2MP", "1.3MP" oder "0.3MP" are the available options. "MP" stands for megapixel, e.g. the "5MP" setting creates a photo of 2592 × 1944 pixels, which is about 5 million pixels. The larger the photos, the greater the detail. However, the microSD card will ﬁll up faster with higher resolution photos. Conﬁrm your selection with the / button to return to the list of menu items.

*Interpolation = calculation method used to increase the number of pixels

Exposure

If you access this menu option, you can then adjust the photo exposure in three steps upwards (from +1 to +3, brighter), or downwards (from –1 to –3, darker). Use the ▲▼ buttons your selection with the

3 photos in series

If you access this menu option, you can then use the ▲▼ buttons or deactivate the function take a series of 3 photos in quick succession. Conﬁrm your selection with the / button to return to the list of menu items.

Self-timer

If you access this menu option, then you can use the ▲▼ buttons self-timer function to 2, 5 or 10 seconds. The photo will then be taken after the set delay when you press the / button . Select "direct capture" to deactivate the self-timer. Conﬁrm your selection with the / button to return to the list of menu items.

/ to select the desired photo exposure compensation and conﬁrm

/ button to return to the list of menu items.

/ to select the

/ to activate

/ to set the

Playback mode

With the menu closed, press the MODE button during photo standby to switch to playback mode. Using the ▲▼ buttons / you can scroll through the stored images. If you select a photo and press the / button , all stored photos will be displayed in an endless slide show. Press the / button again to stop the playback. If you select a video and press the / button , the video is played back.

■ 18│GB

│

CR 5 A2

If you select a photo, the screen will display the following overview:

A – display of the current recording number/total number of recordings B – resolution of the currently selected photo C – battery charge level of the internal battery D – date/time stamp of the captured photo E – symbol for playback mode F – symbol for a write-protected ﬁle

If you now press the MENU button

, the following menu opens:

Delete

CR 5 A2

Delete

If you access this menu option, you can then use the ▲▼ buttons the currently selected image ("Delete this ﬁle"), "Delete all ﬁles" or "Cancel". Conﬁrm your selection by pressing the / button . When you conﬁrm the following query with "OK", the selected delete function will be executed and the menu closes. If, however, the screen shows "This ﬁle is write-protected", you must ﬁrst deactivate the write protection as described in the section "Write protection".

/ to delete

GB│IE

│

19 ■

Write protection

If you access this menu option, you can then use the ▲▼ buttons whether to protect the currently selected ﬁle from deletion ("Write-protect this ﬁle"), to remove the write protection for the selected ﬁle ("Unlock this ﬁle"), protect all ﬁles from deletion ("Write-protect all ﬁles") or remove the write protection from all ﬁles ("Unlock all ﬁles"). Conﬁrm your selection by pressing the / button . Afterwards, the display will return to the list of menu items.

NOTE

► Using this function on a large number of ﬁles can take several seconds.

If you select a video with the ▲▼ buttons following overview:

A – display of the current recording number/total number of recordings B – resolution of the currently selected video C – length of the video D – battery charge level of the internal battery E – function symbol for the MODE button F – function symbol for the G – symbol for playback mode H – symbol for a write-protected ﬁle

/ button : start/stop video/photo playback

/ , the screen will display the

: stop video/photo playback

/ to select

■ 20│GB

│

CR 5 A2

If you now press the MENU button , the following menu opens:

Delete

If you access this menu option, you can then use the ▲▼ buttons currently selected video ("Delete this ﬁle"), "Delete all ﬁles" or "Cancel". Conﬁrm your selection by pressing the / button . When you conﬁrm the following query with "OK", the selected delete function will be executed and the menu closes. If, however, the screen shows "This ﬁle is write-protected", you must ﬁrst deactivate the write protection as described in the section "Write protection".

Write protection

NOTE

► Using this function on a large number of ﬁles can take several seconds.

/ to delete the

/ to select

Showing recordings on an external monitor

NOTE

► The camera can transfer the video signal to an external monitor or the video

input of a television set. Please also follow the instructions of the respective playback device.

♦ Flip the cover

camera to a suitable monitor using a suitable mini-HDMI cable (not supplied). This type of connection can only be used to play back saved videos. The screen is then switched oﬀ.

♦ Start playback with the

CR 5 A2

to one side and connect the mini-HDMI connection on the

/ button .

GB│IE

│

21 ■

Transferring recordings to a computer

Connect the mini-USB plug of the supplied USB cable to the port on the camera and the USB plug to a free USB port of a switched-on computer. The computer now recognises the device as "mass storage", the camera connects to the computer and then the content of the SD/SDHC memory card appears as a new drive on the computer. Now carry out the required ﬁle operations.

Resetting the device

If the device does not work as described in this manual or it does not respond to your operation, use a pointed object, e.g. a paper clip, to carefully press the switch behind the RESET opening

in the housing to restart the device.

Changing the fuse

The car adapter contains a fuse. If the device does not function, it may be because the fuse is defective. Exchange the defective fuse for a replacement fuse of the same type (see also chapter Technical data).

♦ To do this, pull the car adapter ♦ Open the car adapter

anticlockwise (using pliers if necessary) and removing it.

♦ Now, take the plug tip (B) from the fuse (A), remove the fuse (A) and place it to

one side.

by carefully unscrewing the ribbed screw insert (C)

out of the cigarette lighter socket.

♦ Now place the new fuse into the car adapter , place the plug tip (B) onto the

slightly protruding end of the fuse and screw the previously removed screw insert (C) back in.

NOTE

► If the device still does not work or the fuse blows again immediately, the device

is defective. Please then contact the Service Hotline (see chapter Service).

■ 22│GB

│

CR 5 A2

Cleaning

CAUTION

Damage to the device!

► To avoid irreparable damage, ensure that no moisture penetrates the device

during cleaning.

► Do not use any abrasive or solvent-based cleaners as these can damage the

device housing or the device itself.

■ Clean the surfaces of the device with a soft, dry cloth. Use a normal commercial

detergent and water to remove stubborn residue. Ensure that no water gets into the device.

Troubleshooting

This section contains important information on fault identiﬁcation and rectiﬁcation. Observe the instructions in order to avoid risks and damage.

WARNING

► Repairs to electrical devices may only be carried out by specialists trained by

the manufacturer. Improper repairs can cause considerable risks to users and damage to the device.

Fault causes and rectiﬁcation

The following table will help to identify and rectify minor faults:

Fault Possible cause Rectiﬁcation

The camera is not working with the built-in battery.

The camera does not work in the vehicle.

The camera does not record properly during the journey.

CR 5 A2

The battery is ﬂat. Charge the built-in battery from a

switched-on computer connected to

connection on the device,

the or the on-board electrical system of your vehicle.

The vehicle's battery is ﬂat.

The fuse in the car adapter is defective.

There is a problem with the built-in motion sensor.

Charge the vehicle's battery.

Replace the fuse (see section Changing the fuse).

Activate the built-in motion sensor (function "Motion detection" in the setup menu) only while the vehicle is parked.

Increase the sensitivity of the motion sensor.

GB│IE

│

23 ■

Fault Possible cause Rectiﬁcation

The device does not respond as expected to your operation.

The suction cup does not hold ﬁrmly.

NOTE

► If you are unable to resolve the problem applying any of the aforementioned

methods, please contact the Customer Service department.

There is a defect. Use a pointed object, e.g. a paper clip,

to carefully press the switch behind the

in the housing to

The surface being used is not clean.

RESET opening restart the device.

Clean the surface. You can also increase the suction power by moistening the suction cup.

Storage / Disposal

Storage when not in use

If you plan not to use the device for a long period, store it in a clean, dry place away from direct sunlight. In this case you should charge the built-in battery from time to time.

Disposal of the device

The adjacent symbol of a crossed-out wheelie bin means that this device is subject to Directive 2012/19/EU. This directive states that this device may not be disposed of in normal household waste at the end of its usable life, but must be handed over to specially set-up collection locations, recycling depots or disposal companies.

The integrated battery cannot be removed.

This disposal is free of charge for the user. Protect the environment and dispose of this device properly.

You can obtain further information from your local disposal company or the city or local authority.

Appendix

Notes on the EU-Declaration of Conformity

This device complies with the basic requirements and other relevant provisions of the Electromagnetic Compatibility Directive 2014/30/EU and the RoHS Directive 2011/65/EU. The complete EU-Declaration of Conformity, is available with the importer.

■ 24│GB

│

CR 5 A2

Technical data

Cockpit recorder

, via the integrated lithium-ion battery

Operating voltage

Input voltage of the car adapter

Car adapter fuse T2AL / 250V

Output voltage of the car adapter

Data storage medium

Screen

Photo resolutions

Photo format JPEG

Video resolution

Video recording format AVI

Recording angle

Operating temperature 15°C to 40°C

5V

(3.7V/350mAh) or USB connection

12V/24V

the car's electrical system

microSD card, FAT ﬁle system, supports cards

up to a maximum capacity of 32GB

2.7" TFT colour LC display

(approx. 6.8 cm screen diagonal)

5 megapixels, 3 megapixels, 2 megapixels,

1.3 megapixels, 0.3 megapixels (7 megapixels and 12 megapixels interpolated))

Res. 1: 1920 x 1080 pixels/frame rate 25 fps

(data: 1 GB/5 min)

Res. 2: 1280 x 720 pixels/frame rate 30 fps

Res. 3: 640 x 480 pixels/frame rate 30 fps

horizontal

vertical

58° video 1920 x 1080 80° photo 2592 x 1944

30° video 1920 x 1080 56° photo 2592 x 1944

, max. 700mA via

5V

,1A

CR 5 A2

Storage temperature 5°C to 40°C

Humidity (no condensation)

Dimensions (W x H x D)

Weight

approx. 7.5 x 4.8 x 3.2 cm

complete set approx. 160 g

5 to 75 %

Camera approx. 63 g,

GB│IE

│

25 ■

Warranty

The warranty for this appliance is for 3 years from the date of purchase. The appliance has been manufactured with care and meticulously examined before delivery.

Please retain your receipt as proof of purchase. In the case of a warranty claim, please make contact by telephone with our Customer Service Department. Only in this way can a post-free despatch for your goods be assured.

NOTICE

► The warranty covers only claims for material and manufacturing defects, but

not for transport damage, wearing parts or for damage to fragile components, e.g. buttons or batteries.

This product is for domestic use only and is not intended for commercial use. The warranty is void in the case of abusive and improper handling, use of force and internal tampering not carried out by our authorised service branch.

Your statutory rights are not restricted in any way by this warranty. The warranty period is not extended by repairs made under the warranty. This applies also to replaced and repaired parts.

Damages and defects extant at the time of purchase must be reported immediately after unpacking, resp. no later than two days after the date of purchase.

Repairs made after the lapse of the warranty period are subject to charge.

Service

Service Great Britain

Tel.: 0871 5000 720 (£ 0.10/Min.) E-Mail: kompernass@lidl.co.uk

IAN 275078

Service Ireland

Tel.: 1890 930 034 (0,08 EUR/Min., (peak))

(0,06 EUR/Min., (oﬀ peak)) E-Mail: kompernass@lidl.ie

IAN 275078

Importer

KOMPERNASS HANDELS GMBH BURGSTRASSE 21 44867 BOCHUM GERMANY www.kompernass.com

■ 26│GB

│

CR 5 A2

Indholdsfortegnelse

Introduktion ..................................................28

Om denne betjeningsvejledning .............................................28

Ophavsret ..............................................................28

Information om varemærker .................................................28

Anvendelsesområde ......................................................28

Anvendte advarsler .......................................................29

Sikkerhed ....................................................30

Grundlæggende sikkerhedsanvisninger. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Mulig overtrædelse af andres rettigheder ......................................32

Betjeningselementer ...........................................33

Pakkens indhold og transporteftersyn .........................................34

Bortskaﬀelse af emballagen ................................................34

Første brug ...................................................35

Indsætning / udtagning af micro-SD-kortet ......................................35

Montering af kameraet på forruden ..........................................36

Tilslutning til strømforsyning .................................................36

Betjening og funktion ..........................................37

Tænd og sluk, indstillinger ..................................................37

Grundindstillinger ........................................................37

Setup-menu ...........................................................37

Driftsklarhed til videooptagelser ...........................................40

Start / slut for optagelse .................................................40

Foto-optagelsesberedskab ...............................................43

Optagelse af foto ......................................................43

Gengivelsesmodus .....................................................44

Visning af optagelser på ekstern skærm .......................................47

Overspilning af optagelser til en computer .....................................48

Nulstilling af produktet .....................................................48

Skift af sikring ...........................................................48

Rengøring....................................................49

Afhjælpning af fejl .............................................49

Fejlårsager og -afhjælpning .................................................49

Opbevaring / Bortskaﬀelse ......................................50

Opbevaring, når produktet ikke anvendes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50

Bortskaﬀelse af produktet ..................................................50

Tillæg........................................................50

Oplysninger om EU-overensstemmelseserklæringen ..............................50

Tekniske data ............................................................51

Garanti ................................................................52

Service .................................................................52

Importør ................................................................52

│

CR 5 A2

DK

27 ■

+ 104 hidden pages

KOMPERNASS CR 5 A2 User manual [gb]

Specifications and Main Features

Frequently Asked Questions

User Manual