Koldfront BBR900BL User Manual
Built-in Beverage Cooler
Owner’s Manual
For more information on other great EdgeStar products on the web, go to http://www.edgestar.com
BBR900BL
Important Safety Information
Electrical Safety
Do not bypass, cut or remove the grounding plug.
this unit. You may need to contact your electrician
Contact customer service for service options if the
General Safety
ambient temperature is above 50°F and below 95°F.
Do not place any other appliances on top of the unit.
Improper handling can cause serious damage to the EdgeStar beverage cooler and/or injury to the user. This beverage
cooler is designed for domestic indoor use only. Do not use the unit for industrial or commercial use. Any other use
may invalidate the warranty. Please review the ratings label located on the rear panel of the unit for electrical and other
technical data related to this unit. The unit must be used in a properly grounded wall outlet.
Please read and follow the safety information listed below to reduce the risk of fire, electric shock or injury.
Do not exceed the power outlet ratings.
It is recommended the beverage cooler be
connected on its own circuit.
The unit must be installed in accordance with
state and local electrical codes.
A standard electrical supply (115 V, 60Hz), that is
properly grounded in accordance with the
National Electrical Code and local codes and
ordinances is required.
Use outlets that cannot be turned off by a switch
or pull chain.
Always turn the unit off and unplug it from the
outlet when cleaning.
Unplug the unit if it is not going to be used for an
extended period of time.
Do not operate the unit with a power plug missing
the ground plug, a damaged cord or a loose
socket.
Be sure the beverage cooler is properly
grounded.
Never plug or unplug the unit with wet hands.
Do not use extension cords or power strips with
if it is necessary to use a longer cord or if you do
not have a grounded outlet. Do not modify the
power cord’s length or share the outlet with other
appliances.
Do not start or stop the unit by switching the
circuit’s power on and off.
If the power cord is damaged, it must be replaced
by the manufacturer or a qualified technician.
Never repair the unit while it is plugged in.
Immediately unplug the unit if it makes strange
sounds, emits smells or smoke comes out of it,
and contact customer service.
Do not remove any part of the casing unless
instructed by an authorized technician.
You should never attempt to repair the unit
yourself.
unit needs service.
To prevent back and other types of injuries, use at
least two people to move and install the beverage
cooler.
This unit is not intended for use by persons,
including children, with reduced physical, sensory or
mental capabilities, unless they have been given
supervision or instruction concerning the use of the
appliance by the person(s) responsible for their
safety.
Install the cooler in a well ventilated area where the
The temperature range for this cooler is optimized
for beverage storage. Perishable food items may
require a different storage environment.
Do not place hot or warm items into the cooler
before they cool down to room temperature.
This unit is designed to be installed indoors, and
protected from rain, sleet, snow, and/or moisture.
This unit is not intended to be used by children.
Children should be supervised to ensure that they
do not play with this product.
Never allow children to crawl inside the beverage
cooler. If disposing the unit, remove the door.
Do not use this cooler near flammable gas or
combustibles, such as gasoline, benzene, thinner,
etc.
Do not place the unit near heat sources such as
ovens, grills, or direct sunlight.
Only use in an upright position on a flat, level
surface and provide proper ventilation.
Do not pinch or kink the power supply line between
the unit and cabinet.
Do not leave any cleaning solutions in the unit
Do not use solvent-based cleaning agents or
abrasive solutions to clean the unit as they may
damage the interior and exterior.
Do not turn the unit upside down, on its side, or at
an angle off level.
If your model cooler is equipped with a lock, take
care to keep the keys away from children.
Do not move the unit without emptying the contents
and securing the door in a closed position.
i
Table of Contents
IMPORTANT SAFETY INFORMATION ................................................................. I
INTRODUCTION ................................................................................................... 1
PARTS IDENTIFICATION ..................................................................................... 2
BACK VIEW .......................................................................................................... 2
FRONT VIEW ........................................................................................................ 2
INSTALLING THE BEVERAGE COOLER ........................................................... 3
TYPES OF INSTALLATION....................................................................................... 3
Free-standing installation: ............................................................................. 3
Built-in installation: ........................................................................................ 3
INSTALLATION CLEARANCE REQUIREMENTS .......................................................... 4
ELECTRICAL REQUIREMENTS ................................................................................ 5
Recommended grounding method ................................................................ 5
LEVELING THE BEVERAGE COOLER ....................................................................... 5
INSTALLING AND REMOVING THE SHELVES ............................................................ 6
REVERSING THE DOOR SWING .............................................................................. 7
OPERATION .......................................................................................................... 8
INSTALLATION CHECK LIST BEFORE OPERATION .................................................... 8
USING THE TEMPERATURE CONTROL PANEL ......................................................... 8
NORMAL SOUNDS ................................................................................................ 9
DEFROSTING ....................................................................................................... 9
PREPARING THE BEVERAGE COOLER FOR STORAGE .............................................. 9
CLEANING AND MAINTENANCE ...................................................................... 10
EXTERIOR CLEANING ......................................................................................... 10
INTERIOR CLEANING ........................................................................................... 10
TROUBLESHOOTING ........................................................................................ 10
TROUBLESHOOTING CONTINUED ......................................................................... 11
SPECIFICATIONS ............................................................................................... 12
EDGESTAR LIMITED WARRANTY ........ ERROR! BOOKMARK NOT DEFINED.
First Time Operating Instructions
Before use, make sure all packaging labels and materials are all removed from
the unit. Be sure to keep track of all included parts and pieces before discarding
packaging materials. It is advised that you keep the original box and packaging
materials in case you are ever to move or ship the appliance in the future.
Let the unit stand for at least 24 hours before you use it; this allows the cooling
components time to settle from transit. The instruction manual should be read
before use.
This owner’s manual is provided for reference use only. Specifications may
change without prior notice. Refer to the product label on the back of your
beverage cooler for the latest technical information.
Koldfront Built-in Beverage Cooler ii
Introduction
Thank you for purchasing this Koldfront beverage cooler by EdgeStar. We are
glad you chose us. We believe that your purchase of this product opens a
relationship between you and EdgeStar. We will provide the customer support
needed to nurture that relationship.
This manual contains important information regarding the proper installation, use
and maintenance of your beverage cooler. Following this manual will ensure that
your product will work at its peak performance and efficiency.
Please save the original product packaging in case you need to safely transport
your beverage cooler.
For Your Records:
Please write down the model number and serial number
below for future reference. Both numbers are located on the
ratings label on the back of your unit and are needed to
obtain warranty service. You may also want to staple your
receipt to this manual as it is the proof of your purchase, and
is also needed for service under your warranty.
Model Number:
Serial Number:
Date of Purchase:
To better serve you, please do the following before contacting customer service:
If you received a damaged product, immediately contact the retailer or
dealer that sold you the product.
Read and follow this instruction manual carefully to help you install, use
and maintain your beverage cooler.
Read the troubleshooting section of this manual as it will help you
diagnose and solve common issues.
Visit us on the web at http://www.edgestar.com to register your
product, download product guides, additional troubleshooting resources
and up-to-date information.
If you need warranty service, our friendly customer service
representatives are available via email at service@edgestar.com or by
telephone at 1 (866) 319-5473.
1
Parts Identification
Back View
Front View
Product Label
Power Cord
Power Plug
Cabinet
Control Panel
Shelf
Black trim Door
Front vent
Leveling foot
Top Right Hinge
Tip: Gather the model
beverage cooler.
and serial number
from the product label
and write them down
before installing the
Koldfront Built-in Beverage Cooler 2
Installing the Beverage Cooler
The beverage cooler should be installed in accordance with local
electrical code requirements. The beverage cooler should also be placed
in a location that is strong enough to support its total weight, keeping in
mind that it will weigh substantially more when fully loaded than when
empty.
Before you plug the beverage cooler into a power supply, be sure to let it
stand upright for at least 24 hours to allow the compressor’s oils to settle.
Unpacking the Beverage Cooler
WARNING: Use two more people to move and install the beverage
cooler. Failure to do so can result in back or other injury. Carefully remove
the packaging materials. Remove any shipping tape and glue from your
beverage cooler before using. Do not use sharp instruments, rubbing
alcohol, flammable fluids, or abrasive cleaners to remove tape or glue.
These products can damage the surface of your beverage cooler.
IMPORTANT: Do not remove any safety, warning, or product information
labels from your beverage cooler.
Types of Installation
This beverage cooler has been designed for free-standing, or built-in
installation. In every case, there must be adequate ventilation and access
for service.
Free-standing installation:
A free-standing installation will allow you to install the beverage cooler in
almost any place you desire. You must follow the stated instructions for
electrical requirements, and leveling the beverage cooler.
Built-in installation:
A recessed installation will allow you to install the beverage cooler under
a counter or in a kitchen cabinet provided the required clearance space
around the beverage cooler is followed.
It is necessary to allow adequate ventilation space around the unit (make
sure there is at least some ventilation room for the back of the unit). The
following additional items must be observed.
1. Place the beverage cooler in front of the installation location. Adjust
the feet and place the unit flat on the floor or on a platform depending
on your installation requirements.
2. If the electrical outlet for the beverage cooler is behind the cabinet,
plug in the beverage cooler.
3. Push the beverage cooler into position.
WARNING: Do NOT install the beverage cooler behind a closed cabinet
door.
3
Loading...